Software to burn Lightscribe labels?

Similar Questions

• burn/lightscribe label

  EU 2 replace my hard drive now my lightscribe does not work. What should I do to burn dvd labels?

  Hello Tangoloco,

  I would try the troubleshooter at the following link:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems/

  It can help to solve problems with CD/DVD using the automatic FIXIT.

  Please answer back with an update to your question.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't burn a label on the side front of the CD

  We were told that our computer was "light scribe" (or something like that), so we can burn a label on the side front of the CD.  I can't find this option anywhere when I burn.

  We were told that our computer was "light scribe" (or something like that), so we can burn a label on the side front of the CD.  I can't find this option anywhere when I burn.

  =============================================
  In addition to the LightScribe drive, you also need LightScribe
  CD/DVD and a special software that may have been before
  installed on your system...

  See the following article for more information.

   
  Burn a label - LightScribe start-up
  http://www.LightScribe.com/gettingstarted/index.aspx?ID=276

• install dvd burner lightscribe Pavilion in my HPEnvy Phoenix

  How can I install burner lightscribe dvd supermulti/cd of drivers of my old HP Pavilion a6500f to my new pc to HPEnvy Phoenix 810 - 150se dt

  Hello

  The Lightscrbe in your old PC Player uses a SATA connection by the HP documentation.  These HP published instructionswill show you how to add a second optical drive. Look for the extra power connector near the existing optical drive.  You will need to buy a SATA data cable and then plug it into an empty SATA port on the system board.  Use one of the empty SATA 3 Gb/s ports. See the image below.   You can consider wearing a latex medium weight glove to avoid scratches and cuts on the hands.

  

  The last issue is to install the LightScribe system software.  Try to reinstall underlying lightscribe systembefore installing your burning software.  In addition, you will need an application that will support Lightscribe.  Burning CD/DVD from Cyberlink or Roxio applications should support optical drives Lightscribe.

• Incomplete LightScribe labels

  I have struggled with this problem for some time and cannot understand why labels do not completely print.

  The labels appear as tasks.  These are not circular rings (if necessary).  For example, a partial label can appear at the bottom of the disc and another part at the top right, while the rest of the drive is completely empty.

  -J' connected the USB directly to the computer (and not via a USB HUB or docing station)

  -keep the external sources of interference away from the USB cable (external hard drives and other cables power)

  -disconnect the power supply when the drive is not in use in order to avoid any static buildup on the inside

  -update of the Lightscribe driver

  -tried to burn in the draft, normal and best repeatedly with the occasional disc but normally succeed after three attempts or more.

  Used drive is an external HP dvd1040, using the software Nero CoverDesigner Essentials and Verbatim DVD + R 16 x discs.

  This has happened using the same computer with two operating systems (XP and 7).

  Any suggestion would be appreciated.

  Problem solved.

  The only thing that has not been tried replacing the cables, especially the USB cable.  Once using a different cable, not more of the image.

  It was likely that intermittent given my attempts to disconnect the power supply would move the USB in an operating position (temporarily).

  I hope my rambling helps someone in the future!

• What is the right software to burn discs?

  Hello

  Every day, I download a bunch of stuff: movies, music, games... So my question is: what software is good for burning Cd/Dvd discs?

  Thank you

  Hello

  You can find many good programs to burn discs, some of them shareware or freeware. Example: Ashampoo Burning Studio, Nero, Alcohol CD and DVD burning software. As for me, I like ashampoo, it is easy to use.

  welcome them

• I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn lightscribe cover__

  I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover

  http://www.Nero.com/enu/tools-utilities.html

  Uninstalling a Nero product did not work properly?
  Use Nero General CleanTool to delete all remaining Nero entries from your system.

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• IM using windows 7 Home Premuim a di can not find windows software for burning image disc anywhere I searched everywhere on start search for assistance please

  as the lines of topic title says im using windows 7 Home Premium and I cannot find Disc image burning software Windows anywhere I looked everywhere search is someone help please I want to try windows 8 for the first time for games and other stuff

  If you burn one. File ISO, right click the. ISO file, click on burn disc image.

  or

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

• LightScribe drive

  I've been burning CDs on my drive, and then burn lightscribe labels.  Suddenly today, burner lightscribe program refused to recognize that I have a lightscribe device in my computer.  I can still burn CD, DVD, etc..  How to solve this problem?

  Hello

  Don't forget to use optical discs Lightscribe.  LS media must be Lightscribe surface face before combustion works.

  Because Imgburn recognizes the optical drive lightscribe capable your app burning lightscribe must be reinstalled. Try to reinstall the underlying lightscribe systemfirst, before reinstalling your burning software.  The HP update is here.

  The Lightscribe website is no longer active.

  Since you have Imgburn installed, you can use it to search an update of the firmware for your optical drive.

• Drive DVD - RW USB NLS - light scribe does not detect

  Hello

  I bought this hp USB because it was marketed as compatible lightscribe. But now, after that I have pluged in it and lightscribe software installed, the software says that it cannot find the lightscribe discs.

  I also have sought solutions/drivers online, but couldn't find it, anyone know what I need to install to get this external USB to burn lightscribe labels?

  Thank you in advance, if you need more info or details, I'll be happy to tell them!

  (on windows 7.1 and the reader product no is A2U57AA)

  Hello

  Must be a mistake, because the specs (same page) says only: "supports 8cm and 12cm CD discs and DVD family DVD single/double layer (PTP/OTP), DVD-R (3.9GB/4.7GB), borders Multi DVD-R, DVD-RAM, DVD-R DL, DVD + R, DVD + R DL, DVD - RW, DVD + RW, CD-DA, CD-ROM, CD-ROM/XA, Photo CD, multi-session, video CD, CD - I FMV, CD Extra, CD Plus. CD - R and CD - RW ", only the software. My suggestion: call HP in your area to find out.

  Kind regards.

• CD/DVD burning software

  I'm trying to find the software on my laptop for burning CDs. I tried just right click and send files to the drive containing the disc, he will write, but it fails. I can't find any software for burning CDs. My other pc had roxio and NTI CD Maker but this HP Pavillion G6 has nothing like that.

  Hello

  You are welcome

  In this case, I suggest to download and install the application excellent freeware ImgBurn.

  There is also a whole collection of guides concerning the use of this application here.

  Kind regards

  DP - K

• DVD burner software missing - Satellite Pro M30

  I bought the laptop with the DVD burner drive. I use my laptop for business purposes and I can't find the CD for the software that came with the laptop.
  All the software I need are installed on my machine except the software that allows me to use the DVD drive to burn DVDs.

  When I insert a blank DVD, the Windows disk folder (which works well with CDs) does not have the files I have to slide on it, and apparently, I need the software provided on the CD to be able to write DVD.

  Can someone help me please? I can't find the software on the Toshiba site, so it would be great if someone could direct me to find...
  Thank you!

  Hello Jad

  If you wish, you can install the Nero software to burn and test it properly. Using Nero application you can burn CDs and DVDs easy.

  If you want to use DVD-RAM media you need to install the DVD-RAM driver you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Burning software

  My laptop is HP Envy laptop PC(model number: D1E93UAR#ABA) m6. This laptop is a software to burn files to disc? Help, please.

  According to the specs of this device, your system comes with CyberLink Power2Go software capable of burning discs. See the following link for more information on the use of this software:

  HP computers - using the CyberLink Power2Go to create, burn and copy disks (Windows 8)

  CyberLink Power2Go allows you to create, burn and copy discs containing data, music and videos

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• Burning software CD for PowerEdge servers in win 2012r2?

  I'm a little amazed here: I can definitely use the dvd drive (HL-DT-ST DVD +-RW GU90N) for playback of CD, but I have been unable to find a software to burn CDs or create an ISO of a DVD.

  The usual suspects like CDBurner XP, PowerISO or ImbBurn show that there is no device installed...

  All this, in Windows Server 2012R2 Foundation.

  Any advice?

  Hello paterler,

  Small question, in Device Manager, is listed as a DVD +-RW DVD drive? -If Yes, have you tried to run the software you have installed, CDBurner XP as an administrator? technet.Microsoft.com/.../cc732200 (v = ws.11) .aspx