burn/lightscribe label

Similar Questions

• Software to burn Lightscribe labels?

  When I bought a HP dvd1040 Lightscribe Drive for my old system, a copy of Nero Essentials has been included. When I upgraded to version 7, I couldn't find an option to create a Lightscribe label.

  Software Nero has proved to be difficult to get the installed proeprly and there is no free support. In fact, their support was very good at all. He was on the upgrade and spend more money for bloatware.

  Can anyone recommend some software of labelling with features more that basic (for example, was provided with my HP a6700f computer)?

  The HP LightScribe Toolbox version is not very complete.

  However, I found the full version of LSTB online for only $17 .00US for the downloaded version.  It is intended especially for LightScribe labels and gives a lot of options for graphics.

  I highly recommend that and you can find it at www.lightscribetoolbox.com.

• I can't burn a label on the side front of the CD

  We were told that our computer was "light scribe" (or something like that), so we can burn a label on the side front of the CD.  I can't find this option anywhere when I burn.

  We were told that our computer was "light scribe" (or something like that), so we can burn a label on the side front of the CD.  I can't find this option anywhere when I burn.

  =============================================
  In addition to the LightScribe drive, you also need LightScribe
  CD/DVD and a special software that may have been before
  installed on your system...

  See the following article for more information.

   
  Burn a label - LightScribe start-up
  http://www.LightScribe.com/gettingstarted/index.aspx?ID=276

• install dvd burner lightscribe Pavilion in my HPEnvy Phoenix

  How can I install burner lightscribe dvd supermulti/cd of drivers of my old HP Pavilion a6500f to my new pc to HPEnvy Phoenix 810 - 150se dt

  Hello

  The Lightscrbe in your old PC Player uses a SATA connection by the HP documentation.  These HP published instructionswill show you how to add a second optical drive. Look for the extra power connector near the existing optical drive.  You will need to buy a SATA data cable and then plug it into an empty SATA port on the system board.  Use one of the empty SATA 3 Gb/s ports. See the image below.   You can consider wearing a latex medium weight glove to avoid scratches and cuts on the hands.

  

  The last issue is to install the LightScribe system software.  Try to reinstall underlying lightscribe systembefore installing your burning software.  In addition, you will need an application that will support Lightscribe.  Burning CD/DVD from Cyberlink or Roxio applications should support optical drives Lightscribe.

• Incomplete LightScribe labels

  I have struggled with this problem for some time and cannot understand why labels do not completely print.

  The labels appear as tasks.  These are not circular rings (if necessary).  For example, a partial label can appear at the bottom of the disc and another part at the top right, while the rest of the drive is completely empty.

  -J' connected the USB directly to the computer (and not via a USB HUB or docing station)

  -keep the external sources of interference away from the USB cable (external hard drives and other cables power)

  -disconnect the power supply when the drive is not in use in order to avoid any static buildup on the inside

  -update of the Lightscribe driver

  -tried to burn in the draft, normal and best repeatedly with the occasional disc but normally succeed after three attempts or more.

  Used drive is an external HP dvd1040, using the software Nero CoverDesigner Essentials and Verbatim DVD + R 16 x discs.

  This has happened using the same computer with two operating systems (XP and 7).

  Any suggestion would be appreciated.

  Problem solved.

  The only thing that has not been tried replacing the cables, especially the USB cable.  Once using a different cable, not more of the image.

  It was likely that intermittent given my attempts to disconnect the power supply would move the USB in an operating position (temporarily).

  I hope my rambling helps someone in the future!

• I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn lightscribe cover__

  I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover

  http://www.Nero.com/enu/tools-utilities.html

  Uninstalling a Nero product did not work properly?
  Use Nero General CleanTool to delete all remaining Nero entries from your system.

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• LightScribe drive

  I've been burning CDs on my drive, and then burn lightscribe labels.  Suddenly today, burner lightscribe program refused to recognize that I have a lightscribe device in my computer.  I can still burn CD, DVD, etc..  How to solve this problem?

  Hello

  Don't forget to use optical discs Lightscribe.  LS media must be Lightscribe surface face before combustion works.

  Because Imgburn recognizes the optical drive lightscribe capable your app burning lightscribe must be reinstalled. Try to reinstall the underlying lightscribe systemfirst, before reinstalling your burning software.  The HP update is here.

  The Lightscribe website is no longer active.

  Since you have Imgburn installed, you can use it to search an update of the firmware for your optical drive.

• Drive DVD - RW USB NLS - light scribe does not detect

  Hello

  I bought this hp USB because it was marketed as compatible lightscribe. But now, after that I have pluged in it and lightscribe software installed, the software says that it cannot find the lightscribe discs.

  I also have sought solutions/drivers online, but couldn't find it, anyone know what I need to install to get this external USB to burn lightscribe labels?

  Thank you in advance, if you need more info or details, I'll be happy to tell them!

  (on windows 7.1 and the reader product no is A2U57AA)

  Hello

  Must be a mistake, because the specs (same page) says only: "supports 8cm and 12cm CD discs and DVD family DVD single/double layer (PTP/OTP), DVD-R (3.9GB/4.7GB), borders Multi DVD-R, DVD-RAM, DVD-R DL, DVD + R, DVD + R DL, DVD - RW, DVD + RW, CD-DA, CD-ROM, CD-ROM/XA, Photo CD, multi-session, video CD, CD - I FMV, CD Extra, CD Plus. CD - R and CD - RW ", only the software. My suggestion: call HP in your area to find out.

  Kind regards.

• LightScribe printer

  I have a printer HP Photosmart with Lightscribe. I have the software on my MAC but when I try and use it I get a message saying that the Lightscribe printer is not found. I use my printer with a Wi - Fi connection. I can't get any help from the Lightscribe people. Any suggestions?

  Hello

  Here's a response (which is your printer?):

  "Most of the features on the HP Photosmart 8180 all in one printer can be used via wireless or Ethernet connection, but to use the LightScribe labels from your computer, you must connect the printer directly to the computer via the connection USB.

  You must also install the Lightscribe system software to allow your labeling application detect your drive and identify new media. It is recommended to follow the same precautions recommended for USB/Firewire external dives. »

  Source: http://www.lightscribe.com/support/kb/afmviewfaq.aspx?faqid=121

  I hope this helps.

• Pavilion Elite HPE150f desktop: windows 7 64 bit desktop

  someone can answer my question please, when I first bought this desktop computer in April 2010 labeling software Lightscribe disc was pre installed, Lightscribe start-up, Direct disc Labeling, Lightscribe Public SDK, Lightscribe Control Panel, utility window diagnostic of Lightscribe, lightscribe labeler of simple drive Lightscribe Lightscribe demo site, I could click on any one of these and they would take me to the site where I could download the updates and new drive models labelling, I used them several times during my own films.

  Now when I click on the links I get a 404 message, it is still on my laptop husband who bought at the same time and it can burn its records with the models.

  I downloaded the trial version of Audio Labeler, but they want me to pay for the models, I always have my username and password for Lightscribe but can't find it anywhere.

  I contacted Labeler Audio on the forum here and they say that HP holds the license for Lightscribe for life, but they have no record of my user name and password, at the end of 14 days, I'll have to no longer use of the Audio unless labeling software I buy it. How can I get my own Lightscribe return? If anyone can help, I'd appreciate it.

  Hi there @emma22
  
  I understand that you are looking for assistance with the Lightscribe software. I'm happy to help you.

  Try this site, they have the latest version that created HP and other tools.

  LightScribe System Software - lightscribesoftware.org

  Let me know if it works for you.

• HP ENVY - computer laptop 17 t: HP ENVY - it laptop

  I guess that my HP ENVY - computer laptop 17 t is not the capacity of DVDs to create Lightscribe labels. Can someone cnfirm this?

  Hi @bakerla,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Envy 17 laptop t and problems or questions about the Lightscribe working with your laptop. Thank you for your interest in LightScribe disc labeling technology. It is no longer available since November 26, 2013. My apologies.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• 6720 T

  I bought 2 used HP 6720 t and I wanted to know if they normally CD DVD players?

  It was an option. What you have there is a "thin client" that runs a server environment. The software is not installed on the computer, in other words; just enough to initialize and find the server. They aren't portable ordinary normal and I'm not sure that they can be converted into ordinary laptops normals. If all you want to add an optical drive, the regular series 6720 will work:

  http://www.eBay.com/ITM/HP-Compaq-6720S-DVD-RW-DL-burner-LightScribe-drive-ad-7561A-456799-001-/301020903281?PT=LH_DefaultDomain_0&hash=item46163e7771

• DVD player does not read DVDs but reads CDs only.

  my hp compaq 420 core2 duo dvd player does not read DVDs but only reads the CD. How can I fix this, please help me with the correct answer.

  It will probably replace the drive. There is more than one laser in there: one for each function. You can go bad without the other goes wrong.

  608141 001

  Above is the part number for the DVD burner. I couldn't find one on eBay.  In here is a online:

  http://www.mydvddrives.com/replacement-for-HP-Compaq-608141-001-SATA-CD-DVDRW-DVD-RAM-drive-burner-LightScribe-52029

  Replacement is easy. Remove one screw on the bottom and drag the old hunt and replace it with the new drive.

• The call for Experts: help build my DV, mounting system (CS5)

  I read several incredibly helpful articles/guides on building the best PC for the buck.  Evil is perhaps the greatest.  I can't help but notice most of what I read were written a number of months.  In this never ceases to evolve, rapidly changing industry, which translates by light-years ago.

  Some of you experts can I ask this question: If you had $2 k - ish to spend on editing system w / CS5 Production, what would you choose for YOUR system? Excluding the screens, keyboard, mouse, speakers, etc.  Just the case, mobo, RAM, CPU, GPU, PSU, HDD (s), DVD + -, not BlueRay... and what I forget.

  I don't Manage NOT HD video yet, but will improve one day.  I did my homework.  I'm NOT lazy here. But I'M in a HURRY!!

  Many blessings... JAY

  Coltsman33 wrote:

  Many blessings... JAY

  Why thank you.

  	Thermaltake Element V Black Edition steel full Tower computer case Colorshift Fans VL200K1W2Z $154.99
  	Seagate Cheetah 15K.6 ST3146356SS 146 GB 15000 rpm SAS 3 Gb/s 3.5 "drive hard internal-Bare drive $179.99
  	NE5TX470F10DA Palit GeForce GTX 470 (Fermi) 1280 MB 320 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card $259.99
  	KINGWIN Lazer LZ-1000 1000W modular 80 PLUS BRONZE certified PFC active W / switch LED to 3 ways and the universal modular connector... $159.99
  	Patriot Viper II sector 7 Edition 12 (3 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model PV7312G1600ELK $299.99
  	ASUS Rampage III Formula LGA 1366 Intel X 58 SATA 6 GB/s USB 3.0 ATX Intel Motherboard $289.99
  	Intel Core i7-950 Bloomfield 3.06 GHz LGA 1366 130W Quad-Core Processor BX80601950 $294.99

  ? Item = N82E16835608014 "> Noctua NH-U12P SE2 120mm CPU Cooler
  $ 74.99
  SSO"

  

  LG Black 10 X Blu - ray burner - LightScribe Support Bulk SATA WH10LS30 - OEM

  $99.99

  Was a revised items list to fit under 2 k. f course it's missing hds required for page media etc. And also, I'm not sure if the case would be big enough for the CPU cooler. But you get the idea

• The 220-1025PC Omni has a DVD burner compatible LightScribe?

  I have a HP Pavilion Media Center a1310n desktop PC.  It has a DVD burner compatible LightScribe.  LightScribe identifies a disc very carefully. I took it for granted that LightScribe, a HP inovation, would normally be on the HP desktop computer.  It seems that it was a mistake.  I want to confirm the presence or absence of LightScribe in 220 Omni.  For now, I burned my recovery on the 220 LightScribe disks and created the label on the a1310n.  It is a strange situation.  Thank you.

  Hello

  ImgBurn should indicate if the drive is capable of Lightscribe. Maybe you weren't looking in the right screen.