Solid color BG for digital indicator

Similar Questions

• Input data for digital indicator tab does not exist

  Hello

  I'm trying to define the range of data for the numerical indicators on LabVIEW 10.0.1. For some reason when I go into the properties of my digital indicator, there is no input data tab as explained on the Web site of NOR: http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/changing_data_ranges_of_nu/. In addition, in the tab data type, there is a section for the range, but everything is gray. Any help is appreciated. Thank you

  Dig up a very, very old manual (1996!) isn't all that productive. If you want to restrict the output, just use the function in the range and force.

• Solid color tracking

  How to track a wild area on a solid color? For example, I want to import a picture of the Sun and layer it on top of the video. I want him to see an area on the blue sky. I tried track motion to AE and mocha. The follow-up is not always.

  I am very confused. You want to insert a photo of the Sun in a video shot with a mobile camera? If Yes, then do something in the video that you can follow. Then, you apply tracking to «sun» information Another option would be to use the follow-up camera to analyze the movement of the camera, find a target too far from the camera as possible and then add a null value and a camera. Do your Sun one 3D layer (may disappear), then hold down the SHIFT key and make null the parent of the Sun. Sun snaps into position. Now just drag in the point in the sky where you want the Sun to be.

  Another option is to stabilise the shot so that it does not move, then add your Sun, then re - introduce the motion to the shooting. Here is a quick tutorial that shows how to do this. The target would be the sunset. You cannot configure a matte, but you find just something in the movie that you can follow to stabilize the film so that it does not move. If there is a lot of movement of camera you use two points. Then you add your Sun and follow the steps to add movement to the movie and applies the inverse of the motion in the Sun.

  If none of these techniques work for you please give us a better description of what you're trying to do.

• Possibility to write a program for a digital indicator labels

  I see that there is a property node for the digital indicator that you can manipulate the tag with it.  After trying to use this feature, I get an error saying that you can change this functionality during edit mode.  My question is if there is property node to change the text why you can't it programmatically change?

  You must show the legend for the control and hide the label.  You can change the captions at run time.

• Sir, I have windows 7, after the creation of PDF files the icon was in solid color red and grey, but now the icon changed to adobe acrobat 7 professional, logo, how can I get the icon or the old logo for my PDF files as the previous icon is very easy to i

  Mr President

  I have windows 7, after creation of the solid color red & gray icon PDF files, but now the icon has changed to adobe acrobat 7 Professional logo, how do I re obtain the icon or the old logo for my PDF files as the previous icon is very easy to identify, also I used acrobat adobe 7 Professional but this problem was not there.

  Hi manojp35249311,

  Acrobat 7 is not compatible with Windows 7, so it's difficult to judge how the application on an incompatible environment will behave.

  Please attach a screenshot so that we can diagnose the problem correctly.

  Kind regards

  Nicos

• Hey, how to choose a color for a gradient? It only allows me to do black and white or a solid color

  Hey, how to choose a color for a gradient? It only allows me to do black and white or a solid color

  1. Select a point of gradient
  2. Change the color in the color palette (you may have to use the wheel of color palette menu to change the color mode), or drag a swatch swatch on the gradient stop form or option click a swatch in the Swatches palette

• shade of color through blocks of solid color

  I use the first 10 Elements on a MacBook Pro and I wonder how to apply a block of solid color of a clip, and then reduce the opacity for him give a kind of a blur, rather than playing with the individual settings look (hue, saturation, contrast, etc.), although a combination is likely ideal. I know that it was possible to do in some versions initially and I hope that that is the case here as well. I'm new to EPA of Final Cut Express 4. Any help is greatly appreciated.

  First, just the reframing effect should not degrade the Matte color, or anything else. However, if one of the scales then upwards, there will be degradation.

  For the Position, select your color Matte or template and go to the effects. If you have not added other effects, such as harvest, you will see fixed, Motion, opacity, Rotation, and Volume effects if you also have Audio. Go to the effect of movement and whirl it open (small triangle to the left) and you will then see two effects of movement, Position, and scale. Make sure the CTI (the time indicator current w / Red change the line - also called the read head) is on the first frame of the Matte or template and then use Position to move it to the desired location. This will add a keyframe single head (first image) of your Clip. You can adjust the Position of several ways, for example by dragging the rectangle encompassing, by clicking and typing in the coordinates for Vertical and Horizontal or click + rub values in the areas of coordination. I like to type in the values, because it is what I think is be more specific.

  Good luck

  Hunt

  PS - as you said also the opacity, above, if you want to adjust, follow the same steps, but just go to the fixed effect > opacity and adjust that too.

  Note: all these adjustments can be touch-ups, so that they change over time, but if I read your post correctly, you don't need that, in this case. Keep just on the back of your mind.

• How to upgrade the digital indicator with digital input

  Hello guys,.

  I'm trying to write code to do the following:

  The P0.0 USB-6501 connected to a switch which is held at the top via a resistor.

  The switch is pressed and I can detect the entry (my LED panel changes color).

  I need to update a digital indicator (I think it's the correct vi I use) whenever you press the switch.

  Any assistant will be much appreciated.

  
  

• Digital indicator rounded to the nearest whole number

  I have a digital indicator for a 2D double table, and when I play with the display Format in the properties of the indicator, I can adjust to show the 3 digits of precision. However on the indicator, I find myself just get something like 1548.000. However, it did not make sense to me that this number would not have some amount of non zero decimal places, and when I probe the wire table 2d, enter the flag during the race, I can see that the number should actually be something like 1548.315... Is there a rounding adjustment when I checked that I can't find? (The indicator is set to U16) Any help would be greatly appreciated.

  Colin

  Of course I answered my own question as soon as I post. I realized that I wrote that the indicator is U16 that that was my problem, change to the dual representation to be fixed. Sorry for this pointless topic.

• How can I put a digital indicator in a box structure using VI scripts

  I am using VI scripts and I try to add a digital indicator within a box structure.  I'm able to add the structure of the case and the digital display fine, but as soon as I determine the structure of the case as the 'owner' of the digital (rather than the pattern-block being owner) I get error 1060.  Is there a way to get around this?

  Note: I am doing this is because this particular (indicator in a case structure) provision will prevent a VI to be inline when it is built.  This model will provide no functionality itself, it prevents only inlining.  It is added to a larger VI which is used to initialize objects in a simulation, and there are many of them in the total simulation.  If they are inlined, it takes a long time to generate the C code and a performance on this VI is not a problem because it is run only once at the beginning of the simulation.  The rest of the screw must be inline for performance reasons.  Therefore, I am open to other options to avoid a screw of Inline if 'the indicator in a structure of the case' can be done via the script.

  If this is not clear, please let me know and I can clarify.  Thank you.

  Sorry for the mess, it works for me.

  

  Don't mind the empty cluster constants.

• When the value to display in the time format double digital indicator... Changes in value.

  Hi all

  I can't display the values that I want. I have a value double say 320 sent to a digital indicator where I edited the properties of it to display in a time format that contains only minutes and seconds as Yes, 3:20 '. Unfortunately, it takes the value and change it to another value and display that. I don't know what is the issue. If anyone knows the solution... Please post!

  There is an image attatched!

  Thank you.

  I believe only then due to the fact that when I convert a timestamp value to double as 03:20, he gave me 320. So I thought that the reverse can be trying. Should I just enter the total amount of seconds and that will show the Minuteseconds I want?

  Thanks for the quick response.

• Digital indicator display

  I use the digital indicator for my Countdown to 0 (zero). The thing is I don't like when the number of numbers to 0, and then view - 0. Someone knows how to set the display to 0 instead of - 0.

  Thank you

  The only reason is could may show zero is if it's displaying a negative number slightly less than zero and is getting round.  What is the representation of your screen?  Is this double or is it all over?  Maybe if you have validated your VI, we see what is happening and provide better suggestions.

• input string to digital indicator

  I get read values string in the following format

  \s\s\s\s\s\s\s\s\s0

  \s\s\s\s\s\s1000

  \s\s\s\s\s75000

  -\s\s\s\s\s1000

  How can I format for digital and show them in digital indicator (I32) like

  0

  1000

  75000

  -1000

  etc.

  Read the characters are always 10 in number and I want that they to display the digital signature

  Thanks and greetings

  Hi rajxabc

  Please check if this meets your requirement.

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• Table 1-d digital indicator

  I read another post on this forum, but I can't seem to make it work as I'd like. I have a constant matrix 1 d in the block diagram, which I want to output to a digital indicator on the front panel. The thing is that I wanted, it displays the first item in the table for a while, and then automatically update the second element and so on. I guess that this will involve loops and others as I have tried, but above all it has yet to work properly.

  See you soon

  Craig McMillan

  Just change everything in a loop to a for a loop and pass berries outside.