Solution Center disappeared

Similar Questions

• C7283 all-in - One Solution Center has disappeared, and now cannot parse.

  My C7283 all-in-one worked many years. Out of the blue, the HP Solution Center disappeared & now I cannot SCAN. I am running Windows 7. The origonal disk rejects the installation. I downloaded the latest version of the software. At the end of installation "Fatal Error" occurs. I disabled my antivirus software during installation. I've tried various places of payware online support & always get sent to HP customer, but just go in circles. I tried HP by phone & no luck. I have uninstalled & reinstalled several times with the same results.

  Hello 1fisheagle

  Follow the instructions below to "clean" or "scrub" your printer drivers. I had the same error before and after these steps it is solved for me. (results may vary) The second paragraph usually gives better results that brush instructions tend to be newer than this delivered on CD.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  Adobe Flash Player
  9 download drivers and full software features
  Photosmart C7283 full of software features (Windows 7)
  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  Adobe Flash Player
  9 download drivers and full software features
  Photosmart C7283 full of software features (Windows 7)
  10. run the download to reinstall the printer

• Photosmart Plus B210a will not touchpad as missing HP Solution Center scan

  Hello

  I'm on Windows 7 Professional 64 bit

  I have a Photosmart more B210a

  For 18 months he has been fine, but now the HP Solution Center disappeared.

  I tried to uninstall and reinstall.

  I did both the original disc and then using the software "full feature", but the Solutions Center is nowhere to be seen.

  I use the wireless printer and everything works except that I can't use the touch pad to analyze, because there is no way I can activate it.

  So, how can I get the HP Solution Center - please, do not say reinstall as I did 5 or 6 times using the drive and the software PSB210_231.exe.

  Thank you very much

  Mike

  Thanks again

  I'll try that as soon as I get home

  Mike

• HP Solutions Center's will NOT install on Windows 7

  Hello world

  I have Windows 7 64 bit and a HP Photosmart C309a all in one. My HP Solution Center disappeared after going to Windows 7. Now, I can't scan or make photos or anything but the right impression. I downloaded the latest version of the "full" of HP software which they posted 03/10/10. Downloads, it will not be installed. I get messages like fatal error #24910544.zip and #1935 error occurred during the installation of Assembly Microsoft.MSXML2 processor architecture = "x 86", public key token = 6bd6b9abf345378f, version = 4.1.0.0, type = win 32. Help! I landed a job after his foot for 22 months and need to scan and e-mail files to my new employer and I can't get this stupid thing to work. Help, please! Thank you.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Details of HP.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Photosmart C4588: Solution Center missing hp C4588

  Hello

  I recently installed the latest version of the software for my printer from the HP site. Post, the installer HP solution Center disappeared. Please help.

  Kind regards

  Rajat

  Hi Rajat24,

  Welcome to the HP Forums.

  I see that you have a problem with the installation.

  Please click on the following link for "this program might not have installed correctly"

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• Satellite computer C75D laptop: HP Solution center opens, and then disappears

  Apparently, there was a software update HP on 18/12/15 followed by 2 updates to windows 12/22 and 12/25/15.  I did not use the meanwhile hp Solution Center, so I don't know which is the origin of the problem.  When I try to open the software, I see it briefly and then disappears.  I need the software to be able to scan. Can anyone offer ideas?  I guess it has to do with one of the updates.  I want to reset my computer, but even that gives me a problem.  Everything was fine before!

  Hello

  This is due to the update of security for Microsoft Windows (KB3132372). Please remove and wait for a fix from Microsoft

  Kind regards.

• OfficeJet Pro 8600 Solutions Center has disappeared

  I am running Windows 7 Home Premium 64 bit on a laptop HP Pavilion series g.  After using my Officejet Pro 8600 for about a year with great success, all of a sudden when I click on the icon of the printer to my desktop, the Solutions Center (used to give me the menu scanning, etc.) disappeared.  Now, when I click on the HP Officejet Pro 8600 icon, I get a screen that asks if I want A) connect a new printer, B) reconfigure wireless settings or C) add more software.

  My wireless settings are fine, and I have no problem to print wireless from any of my computers or other devices.  I can even scan in the menu of the printer, but I prefer to analyse in the menu of the computer, because it allows me to customize the settings more.

  I reinstalled the drivers once today, but it does not solve my problem.

  Help, please?

  ~ Cricket

  Salvation of Cricket,

  In the temp folder, open the most recent 7z folder of the installation of HP where the MSI file.

  Click once on the way to the top folder, it will go the way of the real folder.

  Copy this path.

  Right-click on the 64.msi x file and choose repair, once the error appears click Browse and paste the path copied to this folder, then it should complete the repair as expected.

  If the problem persists, click on uninstall unser start > programs > HP > HP Officejet Pro 8600 to remove the software.

  Then reinstall the software by clicking on the Setup.exe icon in your temp folder 7z folder.

  Please let me know of any problems,

  Shlomi

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• HP Solution Center: Solution Center does not open

  Recently upgraded to W7 to W10.  After many questions, I go back to W7.  Because I started having some "windows install can not find the MSI file" I uninstalled my HP printer and deleted files.  I then reinstalled the printer (C4280 so this is important) and all software.  The printer works fine but Solution Center no longer opens.  When I try to run it, the "Welcome" screen appears for about a second, then it disappears and the program does not start.  I uninstalled and reinstalled several times without success.  (It worked fine before the aborted W10 upgrade.)  I wonder if an important file (or files) is missing that the Setup program does not replace?  In any case I hope someone can help me to get the program running again!

  Hi!, kelzeegla:

  Welcome to Forum!

  Try with this link... http://support.HP.com/GB-en/document/c04658195?JumpID=reg_r1002_uken_c-001_title_r0001

• 15 HP - printer F380: dead Solution Center

  Today, I scan a document; I click the icon solution centre "centro soluzioni HP" as usual, but it does not work. The first image of the app flashes for a moment and then disappears. Everything worked fine until a few days ago, surviving the W10 migration (from 8.1) feared. What's happened since I've used the last time? What can I do? I tried the application MS analysis, but it is very limited; No pdf, multipage control.

  Here's a solution:

  Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.

  Click the appropriate option.

  Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  Click on uninstall and work through all the guests.

  Once uninstalled, the HP Solution Center will work.

• Deskjet 4400 series: How can I get to the HP Solutions Center?

  I can't find any Solutions HP Center on my computer.

  According to the on-site HP troubleshooting page, I navige'yi Windows icon all programs--> HP--> HP Solutions Center's-->.  But there is no HP very well under all programs.   I followed the instructions to download the driver software.  Even if I downloaded the softward, nothing happens and there is still no HP or the Solutions Center HP under all programs.  In my downloads folder, there is a database of installation entitled HPSupportSolutionsFramework-en - 11.51.0048.  But when I click on it and click on install, yet I can't find any HP or HP Solutions Center under all programs.

  I still have the original disc, but when I put it in my computer, nothing happens.  I uninstalled printer and printer software and tried again, and still nothing happened.

  Incidentally, there is a HP support page that allows me to send a message to a service technician.  When I click Next, the page disappears and I'm back to a previous page, with no indication whatsoever that my message was sent / receipt / acknowledged, etc.  What is happening with this?  Very unhelpful.

  Hello

  I guess that the problem is more related to download and not the installer itself, the framework of Solution HP means only ot allow the download of the installer for your printer.

  Right click and save the installer on your desktop by selecting Save the shortcut under... and then run it and follow the PRECAUTIONS:

  http://ftp.HP.com/pub/softlib/software12/COL27506/al-68493-5/DJ_AIO_05_F4400_NonNet_Full_Win_WW_140_048-4.exe

  Please let me know if this is useful,

  Shlomi

• HP PSC 2110: need HP solution center software for hp psc 2110 running windows 7 32 bit

  Hello

  The HP Solution Center software has disappeared since I move my laptop HP OS from Vista to Windows 7 32 bit.  I use HP Solution Center for the years software to create PDFs of the documents scanned the printer HP PSC 2110 all-in-one.

  Can you give us the link to download Win 7 HP Solution Center software? I searched on the HP support site using the name of the HP PSC 2110 product, he pointed me to the section of the driver; I followed the instructions, but there is no link to download the software.

  The printer is connected via USB and works fine.  That's all just annoying that I can't use the HP Solution Center software (previously Director of HP) to copy documents scanned to my computer.

  Thank you.

  You are welcome.

  You can download it from the following link:

  http://sourceforge.NET/projects/naps2/files/3.0b1/naps2-3.0b1-Setup.exe/download

  This means that as an older model, its functionality is limited, but there are a few available workarouds. It is surely worth a try.

  For a wireless printer you will need another printer indded, there are many factors to consider and recommend any specific printer, you have specific needs? would be for example you use a fax or not, I guess, it should be a color with a scanner printer... Do you use to print photos or more often good for a daily newspaper, printing and scanning capabilities, these factors may affect strongly any possible recommendation for more information you will find useful.

  However, any current HP device with a scanner supports scan PDF scanning in the HP software.

• Missing HP Solution Center

  Solution Center has disappeared from the computer for

  HP Photosmart 7510 e-all-in-one printer - C311a

  How can I re - acquire?

  Hello

  From my memory, I don't think that the Photosmart has a Solution Center. I know that this is a similar software called "HP printer Assistant" for Windows (my printer ready last year was a 7510). Anyway, please select the operating system for your computer to download the full feature software and drivers from the following link and install it on your computer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5070121

  Kind regards.

• Printing problem after upgrade HP solutions Center / windows 7

  Hello everyone,

  Since I've updated my PC for windows 7 (and a new version of the HP Solution Center), I can print is no longer any document (the only way to get something out of the printer, print a test through the solution Center page).  Communication is Ok (correct ink levels etc.).  Printed materials appear in the print queue, and then disappear as if they are printed, but nothing is (no error message).

  I have Windows 7 Home premium, to C5180 all-in-one USB connection.

  I already tried the HP diagnostic program and uninstall / reinstall.

  Any suggestion is welcome.

  Thank you!

  I would like you to try this.  Unplug the usb cable from the printer and uninstall the printer software.  Then go to this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us select 32 or 64 bit and install this "HP Print fix software when upgrading Vista to Windows 7" then reinstall your WIndows 7 software for this printing.  Let me know if this solves your problem