Solution of workaround for the creation of recovery disks!

Similar Questions

• Satellite A500 - problems with the creation of recovery disks

  Hello
  I bought a Satellite A500 yesterday and now I'm trying to create the recovery discs before anything else.
  However, towards the end of the 1st DVD I get an error message saying "Faile dto open the next file. e:\Boot\BCD (0201123-F1-00000000 error code)"and then when I click 'OK', the DVD is ejected giving a message"unable to create recovery 1' media. Physical examination, I noticed that the DVD is written almost entirely.

  Any advise on this? In addition, in the interface, it shows a USB option and says to insert a USB media with more than 7 GB of free. That I can use it to create the recovery disk? If Yes, when I reinstall windows 7, this allows as a bootable drive?

  Greately appreciate any help on this matter. If it is defective, I want to return as soon as POSSIBLE.

  Thank you
  Mercier.

  As far as I know, that you can not use external device for recovery, it is therefore very important create recovery DVDs.

  Try to create the recovery disk using only DVD-R media. Use high quality media like TDK or Verbatim.
  Last month, I've created on the Satellite A500-157 recovery discs and everything went well.

• Satellite L450D-failure of the creation of recovery disks

  I just bought the laptop above and tried to create discs of recovery twice.
  Both times, there is no on the first DVD with the following error message:
  Differences between the following files
  D:\HDDRecovery\ODDFiles\sources\boot.wim source path
  E:\sources\boot.wim path target
  0216F-3 c-00000000 error code

  I found a similar position on a Google search that gives to think that there is nothing I can do about it except contact Tohiba and get the recovery media unless the disc is damaged.
  I'm certainly not ready to pay for these discs, because it is not my fault that I can't create them.

  Is there something I can do and what advice can be given on the replacement for the recovery discs?

  In my opinion, there are two options for you:
  -contact your local agent where you bought your laptop and ask for replacement or
  -Contact nearest Toshiba authorized maintainer and explain the situation.

  I imagine that they can order one for you and it will be covered by the warranty.
  Do not wait for a long time and do it as soon as possible.

  One last thing:
  Can you please test if HARD OS installation disk works properly? Start as described in the follow-up paper - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• Satellite L300D-12I: error of calibration of power while the creation of recovery disks

  I have a laptop Satellite L300D-12I & get a "power calibration error" when trying to create Toshiba recovery disks. Does anyone have any ideas how to get over this?

  Power calibration error especially if the laser lens cannot calibrate (moving) in the right position and can not handle the inserted disc.

  In most cases, the STRANGE must be replaced. :(

  I put t know why it happened on your L300 but I hope that your warranty is valid
  So contact the ASP as soon as possible and ask for the check!

• Which disks are accepted during the creation of recovery disks?

  Hiya

  No one knows the answer to this question. I just bought a HP Pavilion dv3-2310ea and wanted to create recovery disks, as shown in the installation instructions. I used Verbatim DVD - R 4.7 Gb 16 x 120 min and the laptop wrote things on the disk, but it cannot check in the end. Thus, none of the recovery disks is possible.

  I got fed up with the purchase! There is no indication on what drives exactly may or may not be used. It's a waste of money, nothing else, the inserted disc cannot be used for anything else.

  Help, please.

  Thank you.

  Sony DVD + R is one I always get good results with and recommend here often. A search of the forum should increase several posts like yours where it has solved the problem.

  Or, as suggested_contact HP and tell them your effort failed and ask a set to be sent. HP used to send em free in this case if you are still under warranty... not sure if this is still the situation.

• solution of workaround for the OS update?

  I want to buy a new camera to take advantage of shooting raw. To convert a Photoshop raw file able to read, it seems that I have to use the most recent PS, which requires an operating system that is much more recent than mine (10.6.8). This failure, I said I'll need to use wine tasters to use Windows 9.5.1 Adobe's DNG Converter because the Mac version does not work on my old operating system. From what I see, the WineSkin installation can be a very complicated proposal, I would like to avoid. It would be much easier if I just upgraded my OS, but my old QuarkXPress and InDesign, PS, etc. will have to be upgraded and my $700 camera would end by costs me more like $1 700. It might not be bad if I had used all the software all the time, but I did not. But when I need it, I really do.

  So I was wondering if there is no alternative workaround, so I'll be able to use the feature raw without breaking the Bank or my head.

  Try the CrossOver Mac test.

  (142438)

• Qosimo G50 - 12G error occurs during the creation of recovery disks

  Nice day

  I have a Qosimo G50 - 12G and I tried several times to do disk recovery, but at some point
  the following error occurs:

  The following file cannot be read

  G:\08299Xsp4.SVM

  Error message: 020150-20-00000000

  Does anybode know what it means and how to fix this?

  Thamks

  Hello

  Have you changed something on your laptop? For example, the partitions of size or do you remove any content of the recovery of HARD drive partition?

  What is the G: drive in your case? Is it a partition or a CD/DVD player?

  I m not very well why this error pops up, but some users here in the forum reported about errors during recovery disc creation. In most cases the use of other and different DVD helped to address this problem.
  I m using the TDK DVD-R and I'm happy.

• Some additional questions about the creation of recovery disks

  HP Clubhouse 17 laptop laptop 17-e040us

  Wireless connection

  Disks creating information that I downloaded from the HP website, he States "If you are prompted for an administrator password, type the password confirmation or providide.

  How to create an administrator password?  The only areas where I created passwords on the laptop are the Login Screen/signature to the PC, Mirosoft account and a Description of the computers.   How can I give confirmation?

  Disconnected from the internet.  After the login screen and go to the start menu, I'm not connected to the internet.  Fix?

  Do I have to disconnect external equipment of the laptop before you create recovery discs?

  During the process of creating, if it has stop or, a message that something is wrong, what should I do?

  Thank you.

  You're not likely to be asked for Admin password unless you use a user account created with Limited permissions such as we would be put in place for another user on their machine. Some people share a machine with children, adolescents and setup one account limited for them.

  I never really worried about to disconnect Internet-just don't have Internet Explorer or Email app open and active on the internet. You could always disable the wireless I guess. Usually the F12 key in the top row turns stylized / disable tapping. White = light it.

  If you have a problem... just after this problem if the Recovery Manager gives no details of what you need to do about it. You can always phone HP and request a recovery media if the process fails for you.

  Just try to stop worrying and thinking that it. Go ahead!

• Creation of recovery disks - problems

  Hi all

  I wonder if anyone can help me?

  I recently bought a used HP Pavilion DV6 (DV6-2110ea - product number: VY095EA) laptop and I have problems with the recovery system.

  When I bought it, I managed to recover the system to set up the laptop back to settings by default, and as an afterthought, I tried using the recovery software to see if I could create a set of disks.

  I ran the program expects to be told that the records had been created, but the software came with the message that he has split the partition to create the DVD.

  After a while, he came with a message saying that the disc 2 of 4 was created and asked for the next DVD.

  It seems that the creation of recovery disks never finished original owner and I was wondering if there was a way to start the process so I could successfully create disks.

  Any help you guys could give would be extremely useful.

  Thanks in advance.

  Re the above:

  I have authorized the creation of recovery software complete two final discs that then created file "hpdrcu.prc" in both the location suggested above.

  I deleted the and represented software and it has allowed me to create a complete set of discs.

  Whether if they work, it is another matter altogether, but I'll cross that bridge when I come to it (again - there's always Linux)

  Thanks anyway.

• Partitioning hard drive, I want to spend 30/40 GB drive and the remaining space for the creation of other partitions.

  I created a recovery disc for my system that I bought the new laptop.
  It consist of 500 GB HARD drive, now the problem is the C - drive which is my WIN7 Home Basic installed occupies 400 GB of space and the D-drive has only 25 GB.
  My problem is I want to partition the drive C so that the other player must occupy the space according to my condition.
  But here its only gives me half the space to shrink.
  I mean, when I opened diskmgmt to shrink, C this is 200 GB disk space allotted to me.
  Medium I can use this space to create other partitions, but what I want is, I want to spend 30/40 GB C drive and the remaining space for the creation of other partitions.
  Help, please... Thnks...

  That's what we tried to tell you. An OEM installation does not lend itself to change and having to clear guarantees for re-setup means that you must be quite certain that you have other reliable ways to re-setup.

  If you want to dabble with Linux or dual boot, you should buy a complete commercial edition of Windows 7 that will give you more flexibility and accept that for drivers etc, you're on your own...

• Convert data in hierarchal of hierarchical data for the creation of the tree

  Hi guys,.
  
  I tried to figure this out for about two days together now and I'm still stuck and I see no possible solution that does not involve a new creation of the table.
  I want to create a tree to navigate through projects and tasks, I use the demo "Task Manager" app, which I customized it a bit to fit my needs.
  
  Basically, I can't create the tree because the relationship between projects and tasks is not a hierarchical relationship, it's a relationship 1: n like this:
  
  __Projects__
  ID (PK)
  PROJECT NAME
  
  
  
  ___Tasks___
  ID (PK)
  Project (done FK reference Projects.ID)
  
  
  So what I have to do is to "force" this relationship 1: n with a hierarchical relationship by creating a query (view) that links the two tables into one and have 2 columns, I can use as ID and PARENT_ID for the creation of the tree.
  
  This is the data model:
  
  
  CREATE TABLE 'EBA_TASK_PROJECTS '.
  (NUMBER OF 'ID',
  'PROJECT_NAME' VARCHAR2 (255),
  "CREATED_ON" DATE NOT NULL ACTIVATE.
  'CREATED_BY' VARCHAR2 (255) NULL NOT ACTIVATE.
  DATE OF THE "UPDATED_ON"
  "UPDATED_BY' VARCHAR2 (255),
  'FLEX_01' VARCHAR2 (4000).
  'FLEX_02' VARCHAR2 (4000).
  'FLEX_03' VARCHAR2 (4000).
  'FLEX_04' VARCHAR2 (4000).
  'FLEX_05' VARCHAR2 (4000).
  NUMBER OF "PARENT_ID"
  VARCHAR2 (1) 'IS_ACTIVE ',.
  VARCHAR2 (4000) "DESCRIPTION."
  CONSTRAINT CHECK of 'EBA_TASK_PROJECTS_ACTIVE_CC' (in is_active ('Y', 'n')) ENABLE,.
  ENABLE 'EBA_TASK_PROJECTS_PK' CONSTRAINT PRIMARY KEY ('ID')
  ) ; ALTER TABLE 'EBA_TASK_PROJECTS' ADD 'EBA_TASK_PROJECTS_FK' OF CONSTRAINT FOREIGN KEY ('PARENT_ID')
  REFERENCES 'EBA_TASK_PROJECTS' ('ID') ON DELETE CASCADE ACTIVE;
  
  
  CREATE TABLE 'EBA_TASK_TASKS '.
  (SELECT 'ID' NUMBER NOT NULL,)
  ACTIVATE THE "PROJECT" NUMBER NOT NULL,
  ACTIVATE THE "TASK_PRIORITY" VARCHAR2 (400) NOT NULL,
  ACTIVATE THE "TASK_DIFFICULTY" VARCHAR2 (400) NOT NULL,
  ACTIVATE THE "TASKNAME" VARCHAR2 (4000) NOT NULL,
  VARCHAR2 (4000) "TASK_DETAILS."
  "CREATED_ON" DATE NOT NULL ACTIVATE.
  DATE 'DONE ',.
  ACTIVATE THE 'CREATED_BY' VARCHAR2 (400) NOT NULL,
  'STATUS' VARCHAR2 (4000).
  DATE OF THE "UPDATED_ON"
  "ON THE ROAD" DATE.
  NUMBER OF "TASK_PREDEFINED_ID."
  "UPDATED_BY' VARCHAR2 (255),
  ACTIVATE THE "USER_NAME" VARCHAR2 (255) NOT NULL,
  'FLEX_01' VARCHAR2 (4000).
  'FLEX_02' VARCHAR2 (4000).
  'FLEX_03' VARCHAR2 (4000).
  'FLEX_04' VARCHAR2 (4000).
  'FLEX_05' VARCHAR2 (4000).
  NUMBER OF "PERCENTAGE."
  ENABLE 'EBA_TASK_TASKS_PK' CONSTRAINT PRIMARY KEY ('ID')
  ) ; ALTER TABLE 'EBA_TASK_TASKS' ADD 'EBA_TASK_TASKS_PROJECTS_FK' OF CONSTRAINT FOREIGN KEY ('PROJECT')
  REFERENCES 'EBA_TASK_PROJECTS' ('ID') ON DELETE CASCADE ACTIVE;
  
  I use APEX4.0
  
  It's good enough that this guy, hope you can help me with this. I'm really stuck on this and I'm about to give up.

  Hello

  So what I have to do is to "force" this relationship 1: n with a hierarchical relationship by creating a query (view) that links the two tables into one and have 2 columns, I can use as ID and PARENT_ID for the creation of the tree.

  I'd say you need a UNION rather than a JOIN.
  Something like:

  WITH project_task_view AS (
   SELECT 'P'||to_char(id) as id
        , null as parent_id
        , project_name as node_name
   FROM eba_task_projects
   UNION ALL
   SELECT 'T'||to_char(id)
        , 'P'||to_char(project_id)
        , task_name
   FROM eba_task_tasks
  )
  SELECT id, parent_id, node_name, level
  FROM project_task_view
  START WITH parent_id IS NULL
  CONNECT BY PRIOR id = parent_id
  ;
  

• Win7 64-bit (pre-installed original), recovery for the 32-bit dvd disk

  I just bought new laptop toshiba L500-208 recently. And I have absolutely no idea how to deal with this new kind of things! Please help me!
  I had a number of compaq for 5 years, when I have the format window just use 1 cd and this finished!

  But now that I do not understand I have win7 64 bit (when I bought it), but I have the 32-bit recovery disc.
  I want to know that if I portable format and use this recovery disk, I won't lose 64 bit, right?
  What happens if I have 64 bit for installation next, what I have to do? Please help me too...
  Thank you very much!

  Hello

  The situation is simply. If you check the market of PC and laptop, you will see that new products will be offered with operating systems 64-bit.
  So, the production of software goes slowly in that direction.

  Toshiba offers all new notebook with 64-bit operating system, but also provide you with the 32-bit version if you feel comfortable with it and if you want to use some software not designed for 64-bit operating systems.

  Your laptop comes with the HARD drive recovery image and if you read s manuals you can find info you need to create own recovery DVDs.
  This can be done with the preinstalled Toshiba Recovery Disk Creator. The shortcut for this tool, you can find on the desktop.

  So, before you anything please create this installation disc. After doing this, you can install the 32-bit version and use so long desired.
  When you want to have the 64-bit version to use the new created the recovery for the installation disk.

  I hope you now understand how it works.
  If you have any other questions please let me know.

• What is the workaround for the Smart keyboard ESC key?

  What is the workaround for the Smart keyboard ESC key?

  For what purposes? In any application, or even the home screen, hold down the "Command" key to view the list of keyboard shortcuts that work specifically with this app.

  Thank you for using communities of support from Apple!

  Ryan

  iPad Keyboard Pro & Smart, iOS 9.2

• We live errors in the creation of recovery media. Please try again

  Hello

  I bought the windows 8 hp pavilion series laptop and tried to create the recovery with blank disc DVD - R disc.

  While burning data first drive the HP Recovery Manager application up the pop-up message like "we live errors in the creation of recovery media. Please try again' with the OK key.

  Press the button Ok app closed automatically once.

  Model laptap

  HP Pavilion n003tx-15 Notebook PC (Windows 8)

  Please someone help me.

  Thanks in advance

  Concerning

  Trehout

  Have you tried to burn in Mode safe?

  http://support.HP.com/us-en/document/c03481733

• instruments for the creations of reactive

  Hi, I want to know if Dreamweaver CC 2015 has determined the instruments to create a sensitive theme. Thank'you.

  If you mean tools for the creation of a sensitive site, Yes, Dreamweaver is the Bootstrap included framework to create sensitive sites.