[Solved] Support to the marshmallow

Similar Questions

• NX supported in the SR1913WM BIOS?

  Installer Windows 8 requires the PAE/NX/SSE2 support.

  I have determined (using Coreinfo by 'PAE/NX/SSE2 support Guide for Windows 8 requirement') that my hardware is supported, but
  
  When I look in my (latest version, 3.11) BIOS, I don't see any of the settings referenced here.  So I wonder if I need to plead with HP to provide an update of the BIOS, so that I can buy Windows 8.

  Card mother Compaq Presario SR1913WM

  Card SR1913WM

  Good news!

  lasvegaswireman wrote:
  

  I have an almost identical motherboard in my computer HP a1632x which also uses the same BIOS v3.11. When I come back to it, either Wednesday or Saturday, I'm going to fire and see if I can find these options in the BIOS. I can also try to install Windows 8 on the system to see if it rejects the computer.

  As he is a very mature system, and no amount of pleading with HP will solve your concerns. HP will release no update BIOS more for this series of motherboards.

  Good news!   I ran "Windows 8 Upgrade Wizard" (including 'check your PC hardware to see if it meets the requirements of system Windows 8... ("including the features of the processor as the CPU speed,PAE, NX and SSE2") and it passed!  So I intend to purchase Win8Pro64 bits.

  Oh, and you are of course right about HP.  I first called support a few times and never in my life I have more rough and poor support.  Once I was promised I would like to be transferred to / lift for a supervisor of the HP support and the next thing I knew I had been connected with Microsoft's 800 number.

• How to get the support of the place of installation files in the specific folder

  Hi, I am using the LabVIEW2009 Setup program for the first time. I have not used any precedents, then my understanding is limited. I created a project and an executable and wants to direct the installer to put a few groups of files in a number of directories in which the executable file will. On the source files page, I see a number of descriptions of record in brackets. I don't understand how to use them. They are set up to point to specific directories? If so, how? So far, I managed to create an installer that puts all the support of the project files in a single directory. My attempts to select a subset of files in the project view window and place them in a separate Directory could not because they are treated as an indivisible group. Basically, I don't know enough about Setup and my research for more information only provided very basic information. If anyone can help by providing or pointing to more detailed information, I would be very grateful. Thanks George

  David,

  Thank you once again. The problem is solved! I had read the help and tried to put \Binaries in C:. It is useful if you run the installation program not only the creator of the installer! It was a situation "can't see the forest for the trees" at the last stage. It was a long day!

  Best regards

  George

• The names of source files are larger than is supported by the file system...

  "The names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  There are about 10 subfolders on the computer. None can be deleted, moved, or renamed without one appearing in the message. I tried UNLOCKER ASSISTANT & DELINVFILE get rid of this file. Once more, none worked. Command prompt did not work as well. Please help me, this issue will not go away on my desk.

  Try first to remove bypassing the Recycle Bin using SHIFT-DEL(thanks, Michael Murphy) rather than just led

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion and you have to force the deletion in this case: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  Have you tried Unlocker (I don't know if it's the same as Unlocker Assistant) but if this if it is different, gives it a try.

  Here is an article on this topic (related to another topic, but essentially the same problem) with a number of suggestions - which can work for you: http://www.howtogeek.com/forum/topic/how-to-delete-source-file-names-are-larger-than-is.

  I hope that one of these options help.  If this isn't the case, after return and we will see if we can find another answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

  A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
  I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

  A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

  I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

  An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

  I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

  I'm going nuts trying to figure out this one!  Thanks for your help.

  BT

  Update:

  I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

  Problem solved.

  Scan of stupid...

  BT

• BlackBerry Smartphones Support for the codec H.264 in OS version 4.5

  Hello

  I am a novice in the field of Blackberry. I recently acquired a BB 8820 phone. The version of the OS is 4.2.2.116. I would like to access H.264 videos on my phone. Will be updated to OS v4.5 help?

  Is another issue a 4.7 OSv? If so where can I download it?

  Thanks in advance

  Etienne

  Etienne says:

  Thanks a lot for your answer. But the 4.5 upgrade will solve my goal?

  Etienne

  I don't think so. The following article can help you to be sure.

  http://www.BlackBerry.com/BTSC/KB05482
  Media types supported on the BlackBerry smartphone

• MAF Oracle will support Android 6 Marshmallow?

  MAF Oracle will support Android 6 Marshmallow?

  Hello.

  Oracle frequently publishes new MAF to add new features, fix problems and extend the support. We monitor very closely future versions of mobile OS supported by the framework.

  Although I can't comment on the timeline, you can expect Oracle to fully support future versions of Android, including 6 Android. Obviously, our plans could change at any time, but I don't see us not fall for the mobile OS more popular on the market.

  Just for fun, I briefly tested the public WorkBetter sample using the Android emulator. I chose the x 86 32-bit image Google API Marshmallow system. The application went very well. This does not mean there will be no problems, but should give you some confidence on our support for 6 Android.

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• No support for the Nikon D7200? Seriously?

  I just upgraded from the Nikon D7100 to the D7200.  I was shocked and very disappointed to see that Adobe is not support for the D7200 files.  I use ambient light for all of my editing, and it is essentially useless to me now.  WHEN will Adobe be be solve this?

  In fact, it was fixed quite earlier. Support has been added in Lightroom 6 and Lightroom CC 2015. Apparently, you may be using an older version of Lightroom, 5.7.1. The D7200 came out after updates that version had been released, and there will be no updates Lightroom 5. You can either upgrade from Lightroom 6, or you can use the free DNG Converter to create copies DNG that you can use in older versions of Lightroom.

• Y at - it an e-mail address for technical support to the creative cloud? I want to send a screen shot requested by chat support. [edited for ease of search; title was "I APOLOGIZE in ADVANCE if I AM IN THE WRONG PLACE"]

  I FINALLY FOUND a WAY TO TALK to the TECHNICAL ASSISTANCE to ADOBE VIA CHAT, the OTHER NIGHT, IT OF 01:30 and WAS making it impossible for me to continue MENTAL fatigue so I asked the tech email I could send the file that he wanted me to leave a screenshot and I would send this morning, he gave me a link, and the next day I tried to get the system error still once , so I could make the screen shot and send it, 24 hours later it finally err'd and when I clicked on the link, he gave me he asks me questions, after question 30, I'm exasperated me I JUST WANT to SEND FING SCREEN SHOT so they can fix their program darn.  does anyone know the email for tech support to the CREATIVE CLOUD?

  < moderator signatures Email and your personal informationpersonal information >

  Hi angimarek,

  I do not know what technical problem you are trying to solve the problems, but I don't want to move your discussion in Adobe Creative cloud for now, as you have indicated that you are looking for technical assistance with creative cloud. You'll most likely to receive the help you need in this forum.

  E-mail of contact technical support regarding: sometimes a technician will provide you with its follow-up email, but it is not an address to which you can send your screenshot. You can, however, open a new chat via this link: Customer Contact. Since you now have a screenshot available, I hope that the new technician will be able to solve your problem quickly. Please note that the chat and telephone support are available Monday to Friday.

  You can also post your screenshot and the question in the forum and our experts will do their best to help you. Make sure to include details on your operating system, what product you are using and what error you receive.

  Best,

  Del

• Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

  Hey everybody,

  We are running vSphere 4.0. During the whole period that we used vSphere, we use vApps and Resource Pools hosts and Clusters to organize and manage the virtual machines used by our production team and test. From what I understand, this can be semantically incorrect (see: http://virtualizationreview.com/blogs/everyday-virtualization/2010/10/vsphere-folder-organization.aspx). So, I've navigated to models and virtual computers, created in folders with permissions of the user and tried to move their respective VMs to their folders... and I get the following error:

  "The operation is not supported on the object."

  So, should I go on the resolution of this or to leave things as they are?

  What are your opinions?

  Is there a right or wrong way to manage VMs of the multiple users?

  Thank you for your time and help,

  Johnathan

  Avinash21,

  Thanks for the tip.

  Move the virtual machines of the TIME solved the problem.

  When I suggest them to the root of the host, I was able to move in a user folder.

  Thanks again,

  Johnathan

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• Adobe flash plugin not supported in the e bike 2nd gen (xt1506)

  fix Adobe flash plugin not supported in the bike e 2nd gen (xt1506) please.

  Nothing for Mozilla to difficulty. The phone uses a quad-core processor, in which the discontinuous old Adobe Flash player 11.1.x does not support because he can't stand of the ARMv7 processor.

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• SIM card is not supported in the activation

  I have a question about activating my iPhone with a different SIM card. I have an unlocked iPhone and I tried to use another (of another carrier) SIM card with it. However, the phone will not turn on and I got an error message indicating that the SIM card is not supported by the initial activation and it isn't a hardware problem. He advised me to call my carrier. So I called my operator and the customer support agent has confirmed that my iPhone is indeed open. Now I'm really confused as to why the other carrier's SIM card is not supported. All SIM cards I've tried with my current provider works with my iPhone. All other SIM cards from other telecommunications companies does not work (I tried 3 others).

  Then the phone is not unlocked. Have you asked an unlock of your carrier and they gave him? If Yes, do restore you the phone to factory with iTunes and receive a "congratulations, your phone is now unlocked" message? If this isn't the case, then the unlock code is not complete. You must restore the device with iTunes at the factory, not a backup. When you get the message "Congratulations", you can restore your backup.