Some driver software is the display in Japanese
(Moved to programs)
At one point, I installed a program on my computer that required me to move to the Japanese locale. Does OK no big deal. The computer is running on Windows 7 Ultimate. When I had finished installing, I changed the locale on. Not too sure if that's what is causing this problem or not, but I now have a very frustrating situation. Since then, I have installed several other programs on the computer, for the most part, the driver for audio adapters software and also for the printer, at this time, my main concern is with the printer. When I want to print, display area is in Japanese. I have no idea what alerts me-low of ink, paper etc... Its all guessing and clicking on an area within the alert, it is also in Japanese. And this only happens with certain programs or drivers not alll of them. Everything is in English as it should. I removes language Japanese, re-installed software pack and so forth to try to fix the problem without success. Can someone help me with this problem. Bottom right of the screenshot, you'll see the alert from the printer in Japanese.
Hello
Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.
You may experience this issue if the system language settings that have changed not registered or if you don't have not set correctly. Dare to change the parameters of language and the region on your computer of your choice and then try to install these programs.
You will have to change the region settings in Control Panel. To change the region setting:
Open Control Panel
Select clock, language and region
Select region and language
Go to the tab location
Change location to United States
Restart the computer and check to see if that solves the problem.
Also in the locale under language settings->-> audit of the non-unicode if programs administrative language is English.
For more information about changing the region, refer to the following link:
Change the country or region setting
http://Windows.Microsoft.com/en-us/Windows7/change-the-country-or-region-setting
Install or change a display language
http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
Tags: Windows
Similar Questions
-
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.
Signature of the problem:
Problem event name: PnPDeviceProblemCode
Architecture: x 86
Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000002B
Driver name: nvlddmkm.sys
Driver version: 8.17.13.142
Driver date: 15/05/2012
OS version: 6.0.6001.2.1.0.768.2
Locale ID: 1033Hi, Senga,
Start > right click on computer
Select manage
Click on continue in the UAC window
Click on Device Manager
Click on the + sign next to the device
Right click on driver and select rollback
If the cancellation is dimmed, select uninstall
Close Device Manager
Back to zero computer and Windows will reinstall the driver
Go to the manufacturer website, download the updated driver to update and save it to the desktop
Double-click the .exe file to install
You can also try booting in safe mode with network. Download the following tool and run a scan complete to rule out malware.
-
Satellite Pro L850 - Driver/tool for the display of the functions of the F keys
Hello
I have a L850 Pro of the Satellite with "nine" Windows 7 Home Premium. I had to reinstall windows and I do not have the recovery DVD, so I used a Windows DVD installation and installed the drivers manually.
The only thing I miss now is the display of the F1 to F12 key functions (like brighter, stronger, touchpad switch, Wifi/Bluetooth power and so on).
Can you tell me, what driver Toshiba or tool do I need?
Thank you very much.
Andy
Hi Andy
What you need is the package of added value. This package contains several tools and utilities. One of them is utility of Flash cards. This tool is for Flash cards that you see at the top of the screen when you press the FN key.
-
My driver will not start. May not be the problem, but it started after I downloaded itunes.
Hello
You may need to uninstall iTunes to get the drive working again.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Please make all below even if you have done some before as it is often the set of operations which solves the problem.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Signature of the problem
Additional information about the problem
Hello
1. Once you get this error?
2 have you made changes on the computer before this problem?
3. which device is causing the problem?
Code 31: This device does not work properly because Windows cannot load the drivers required for this device.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the Fixit from Microsoft Fixit article and if that helps.
Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 2:
Update the driver and check if that helps.
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyFor more information, see the following Microsoft article.
The hunt for drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardwareHope the information is useful.
-
The cdrom did run for awhile... and then he stopped. I googled the error code and it said: ERROR_HANDLE_DISK_FULL
39 (0 xProblem event name: PnPDeviceProblemCode
Architecture: x 64
Hardware ID: SCSI\CdRomHL-DT-STDVDRAM_GH15F___EG00
Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
The PnP problem code: 00000027
Driver name: cdrom.sys
Driver version: 6.0.6002.18005
Driver date: 11/04/2009
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105Is there a way to reset the device?
Thank you... Steve
Hi Steve,.
Here's an article that might help: http://support.microsoft.com/kb/314060
Method One
- Completely remove the Upperfilters and Lowerfilters from the following registry key values:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
NOTE: If you get a code 39 message, it may be that additional third-party filter drivers were added to UpperFilters and LowerFilters values in addition to Adaptec filter drivers. In this case, you can try to remove the first non-Adaptec filter drivers, filters Easy Creator by leaving in place to see if the Code 39 goes away. If you still receive an error code 39, 32 or 31, delete Upperfilters and Lowerfilters completely values in the previous key.
Mark <> Microsoft Partner
- Completely remove the Upperfilters and Lowerfilters from the following registry key values:
-
I have a box that keeps coming back that it has detected a new hardware - peripheral Bluetooth
and it won't go away. If I go through the process of installing software device driver he asks me questions on a disc and if I don't then check the other options and all other options does not work it is in place can not find device driver software. The problem is that's never on the computer as soon as I turn it on it won't go away don't anyone KNOW WHAT I CAN DO?Hello allysoni,
Thank you for using the Microsoft Windows Vista Forums.
I just want to check, your Bluetooth device work? Or it works and you are just be notified? What brand is your Bluetooth device and what type of computer you are on?
Have you went into Device Manager to verify that the drivers are all up to date? Go to start-> Type "Device Manager" in the search field-> select device-> you Manager see no yellow exclamation for one of your drivers? If so, right click and select "Update". If the driver is already updated, and then select uninstall. (You may be prompted to restart)
If you are not prompted to restart, click again on the device and select 'Install' please let us know status. Thank you!
Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Check if the value of the DISPLAY variable - failed
Hi friends,
When installing oracle * 11 g R2 in Linux (Red Hat) 5 * I am facing some problems related to the DISPLAY affecting some Java attack on exception during launch 'runInstaller '. Please check below.
I did face related questions before as well, but after setting the DISPLAY variable before start of installation (YES) always to avoid these problems, tried the same steps this time as well, but "no chance."
=============================================================================================
[data oracle@localhost] $. / runInstaller
From Oracle Universal Installer...
Check the Temp space: must be greater than 80 MB. Real 7440 MB passed
Check the swap space: must be greater than 150 MB. Real 2527 MB passed
Monitor: must be configured to display at least 256 colors
> > > Could not execute auto check for display colors using command/usr/bin/xdpyinfo(1). Check if the DISPLAY variable is set. Failure of < < < <
Audits of the requirement has failed. You must meet these conditions before
continue with the installation,
Continue? (y/n) [n] n
Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2012-05-12_01-26-43 PM. Please wait... [data oracle@localhost] $ Exception in thread "main" java.lang.NoClassDefFoundErrorPrerequisite required Ignoring failures. Persistence of...
at java.lang.Class.forName0 (Native Method)
at java.lang.Class.forName(Class.java:164)
in java.awt.Toolkit$ 2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged (Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution (unknown Source)
to com.jgoodies.looks.LookUtils. < clinit >(Unknown Source)
to com.jgoodies.looks.plastic.PlasticLookAndFeel. < clinit > (PlasticLookAndFeel.java:122)
at java.lang.Class.forName0 (Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
=================================================================================================
Current setting (values):
[data oracle@localhost] $ echo $DISPLAY
localhost.localdomain:0.0
[root@localhost database] # echo $DISPLAY
: 0.0
[root@localhost database] # xhost + localhost.localdomain
localhost.localdomain being added to access control list
[data oracle@localhost] $ export DISPLAY
[data oracle@localhost] $ echo $DISPLAY
: 0.0
Then follows the error message on the display settings and a trail of Exceptions Java (provided above)
Help, please.
Thank you
Prashant DixitPrashant_Dixit wrote:
HelloThanks for the reply - I received a system clock analog once I've run 'xclock' command as long as user root, but received an error message when even tried with the "oracle" user
What EXACTLY do you (differently?) between the time where you succeed as a 'root' & fail as 'oracle '?
I can assure you that xclock will fail if you use "su" as below
Su - oracle
You need TO connect DB Server system DIRECTLY as user 'oracle' with X 11 active transfer OS
-
"Windows needs to install driver software for your Internet access server.
Hello everyone, since April 3, 2010 I get this message just after I turn on the computer and Vista SP2 is ready to ROCK, I change my router in 31 March, for a Lynksis E1000 and it works perfectly since then.
Now, in the cry of the message I have different options from the tree, if I click in the star of windows option "locate and install driver software (recommended)" the search for drivers to install, but then another small window appears asking me to insert the CD that came with my Internet access server (it shows as another option that says "I have not a disc. Show me other options') and there is when I stop because I fear :)
What is c? WHAT is an Internet access server?
My ISP is Comcast, I don't know if it's important.
Can someone help me? THANKS :)
Easy problem to solve, go in right Device Manager click on internet access server select Update driver they are looking on the web for the driver. It may take up to 5-10 minutes. The Device Manager will change other devices forInfrastructure. network devices / Microsoft Wireless Router Module.
Terry
-
driver software encountered a problem code is 31
Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.__ (Problem code 0000001F)
Signature of the problem
Additional information about the problem
Bucket ID: 562419118
Problem event name: PnPDeviceProblemCode
Architecture: x 86
Hardware ID: pci\ven_1022 & dev_7455
Configure the class GUID: {4d36e97d-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000001F
Name of the driver: pci.sys
Driver version: 6.0.6002.18005
Driver date: 11/04/2009
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Hello
Is the hardware ID - Tunnel of graphics from AMD - 8151 HyperTransport (MC) AGP3.0
Check with AMD and also Support from the manufacturer of your system and downloads to update or reinstall
currently the drivers.AMD - Contact
http://www.AMD.com/us/aboutamd/contact-us/pages/contact-us.aspxDrivers & support AMD
http://support.AMD.com/us/pages/AMDSupportHub.aspx====================================
Given that this could be caused by a corrupt or drive or another file, you must also run these 1:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Original title: external recording
While trying to record music on a software, connect the external input jack is
not to cut his computer system. Thus the external player unit is not recorded by
the continuous computer but the record of construction - micro. With the help of windows 7 on a dell computer
laptop.
Seems that you can set with precision in the application (whatever it is) where to get sound input or configuration in the audio to enable driver software disabled the internal MIC (manually each time, or automatic if the driver has this feature.)
Basically - you must look in the configuration of your audio device (third-party drivers) and/or the configuration of the 'software' you are trying to use to "save the music". -
Photoshop has been giving me the warning:
Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.
Also other programs are affected. I suspect a recent download of Adobe. Can anyone HELP.
No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.
Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).
-
"A problem with the display driver.
Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.
"As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.
"GPU improvements can be enabled in the Performance preferences panel."
I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.
- OS: Vista Edition Home Premium
- Dell Inspiron 1520
- Display driver: NVIDIA GeForce 8400 M GS
Sincerely, Danny
Hello
Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor
I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.
The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.
I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.
What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.
I'm talking about a window similar to this one
http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNGTry changing the backup.ini
you find it in
.. \Program files (x86)\MozBackup\backup.ini
Open the file backup.ini with editor
Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights
Change the value of "1": monitor
wyzodir =
; Monitor: the monitor number where MozBackup window will appear
monitor =1
'2' or whatever the value of your primary monitor is:
wyzodir =
; Monitor: the monitor number where MozBackup window will appear
monitor =2
System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.
-
Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display
Hello
I have satellite pro m70-113 with ati x 700 graphics card.
When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.
I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.
The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...
This problem is 25% of the time only when resume...
This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)
This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg
I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...
Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...
Anyone here with a solution?
Thank you.
Hello
I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.
Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.
Maybe you are looking for
-
How to turn off the chat window that loads automatically when you browse
All because I installed firefox when a new page will load when browsing the internet, I get a 4 "square box white cat that appears in the lower right. I tried to disable my chat on all programs, and this does not resolve the issue. I never have this
-
Are there any cd rom on the new MacBook Pro drive?
You buy a separate CD-ROM for all MacBook Pro now?
-
I'm unable to install the automatic updates to Office 2010. I tried trouble shooting with no luck. I need help badly... Thank you
-
Links keep redirecting me to other sites...
When I click on any link in any search engine it redirects me to other sites that are unrelated to what I'm looking for. He did this for a few weeks now. Has it something to do with my current settings or what? Help, please...
-
Hi friends,I have a system of 7663-xxx T61, with 1 GB PC2-5300 667 MHz RAM. My Front Side Bus 800 MHz (I think!), software Everest says my memory controller is capable, dual channel and ~ 85% physical RAM use. I have a nVidia Quadro NVS 140 M 128 MB