Some letters of the alphabet will not type when you try to rename a folder

Similar Questions

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• Error "0 x 80070091: the directory is not empty ' when I try to delete a folder on my external hard drive

  Original title:

  When I am trying to delete a folder on my external hard drive I get the error code following error 0 x 80070091: the directory is not empty

  Hello

  1. are you having the same problem even if you connect the external hard drive to another computer?

  2 have you made any changes to the computer, before the show?

   
  Method 1:
   
  Start your computer in safe mode and then try to delete the folder.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Method 2:
   
  Appropriating the folder and then try to delete it.
  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

   
  Note: The link above also applies to Windows Vista
   
  Method 3:
   
  Check the external hard drive to find errors.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: While performing the check disk on the hard disk, bad sectors are found and if he's trying to repair this area, all available data on the risk of being lost.

• "The session is not authenticated" when you try to convert it to VMWare Infrastructure Server computer machine

  The image was a Linux P2V conversion... I didn't have my ESXi server on the same network, so I just used the Converter 3.0.3 Startup disk to create my virtual image (RHEL 4), and now I'm trying to use the 4 converter to convert the image from the server to the ESXi server.  When I do a "convert", I select 'VMware Workstation or another VMware virtual machine', browse my virtual machine's .vmx file.  In the next screen, I select "Virtual Machine of VMware Infrastructure" in the menu drop down and put my server, including the password information in the boxes below.  I click Next and that works fine, it connects.  From there on, I leave all the default settings and click Next... immedietely at the top of the window, I get "the session is not authenticated.   I did not find anything about it either with the search function, apologize me if I missed something.  Someone else encountered this?

  This happened to me when the time updated Inbox ESXi causing a shift in the session information on the host computer, which I was trying to convert.

  The fix was to bounce the agent converter on the server you are trying to convert.  For me all right.

• new hardware found box of bluetooth device will not disappear when you try to install. ultimately it cannot find driver software but comes from the habit get off my computer

  I have a box that keeps coming back that it has detected a new hardware - peripheral Bluetooth
  and it won't go away.  If I go through the process of installing software device driver he asks me questions on a disc and if I don't then check the other options and all other options does not work it is in place can not find device driver software.  The problem is that's never on the computer as soon as I turn it on it won't go away don't anyone KNOW WHAT I CAN DO?

  Hello allysoni,

  Thank you for using the Microsoft Windows Vista Forums.

  I just want to check, your Bluetooth device work?  Or it works and you are just be notified?  What brand is your Bluetooth device and what type of computer you are on?

  Have you went into Device Manager to verify that the drivers are all up to date?  Go to start-> Type "Device Manager" in the search field-> select device-> you Manager see no yellow exclamation for one of your drivers?  If so, right click and select "Update".  If the driver is already updated, and then select uninstall.  (You may be prompted to restart)

  If you are not prompted to restart, click again on the device and select 'Install' please let us know status.  Thank you!

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Someone at - he found the keyboard does not respond when you try to navigate the menus on calls?

  I tried to enter a password and navigate the menus to join a telephone conference today and found the keyboard is unresponsive and have the screen go black while trying to press the keys. Can we say boring! Anyone else experienced this?

  Is it possible that you put your hand over the proximity sensor (top-right on the left part of the phone) during the call, causing it to go black? Try to put the speaker call after it connects like that allows you to disable the proximity sensor.

  Post edited by: Matt (Forums Manager)

• Windows Media Player 11 says disc not empty when you try to burn

  When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc.  Sometimes, it will finally work after multiple attempts; sometimes not!

  Hi doodle75,

  You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?

  If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.

  To resolve this problem, save the data to a new CD - R or CD - RW.

  Reference:

  You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11

  http://support.Microsoft.com/kb/930370

  Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".

  http://support.Microsoft.com/kb/927814

  Please see the link below for more information

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.

• I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  Hi Meenakshi,

  Thanks for getting back to me. The problem is solved now. We had to reinstall Acrobat DC who, for some reason, had disappeared.

  Regards, Randy

• Hello! I get the message "File not found" when I try to access my photos

  Hello! I get the message "File not found" when I try to access my photos in lightroom, and I can't find my photos! I had cleaned up my Mac and deleted by mistake in a different location and now only a gray peak appears in LR, along cable message, file not found. I had saved the raw disk backup files, but it won't let me import into lightroom. (Alright will appear in the import box, but it won't let me even click on it to add. Help!

  In the grid, right-click on an image of 'missing', select 'go to the folder in the library.

  If the folder view does not resemble what you show Finder, right-click on a folder and select 'Show the parent' '; repeat if necessary.

  This will show you where LR thinks that the file was originally.

  You can try to put the images where they were, or place them go elsewhere and 'move' the file in LR.

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• I can't open my emails or folders. I have new messages, but they will not open when I try to open them.

  I can't open my emails or folders.  I have new messages, but they will not open when I try to open them.  It says LOADING but it is right here does nothing.  It started about 10 days ago.  It also will not open a file I put in place.

  original title: I can't open my emails or folders.

  Hello

  I suggest you to contact MSN support center and check out.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

• Sorry, this content is not allowed when you try to post in the PL/SQL forum.

  Hello
  
  Also the command SQL and reserved words, the formulations used by my request.
  about 37 contained lines:
  
  row_cnt, rec_cnt, disc_amt, item_id, tmp_tot, amount, PMI.
  
  Am confused as to what word/s was considered at fault.
  
  can send the contents of any message to the moderator for verification?
  
  Concerning
  Zack
  
  Published by: Zack.L on July 25, 2010 17:20

  Ah, I see John "440bx - 11 GR 2" figured out that the word problem was "discount" on the sorry, this content is not allowed when you try to view.. (I replaced the "c" by "& #99;" here to avoid the same fate.)