Some of the Pavilion dv6 drivers do not work

Similar Questions

• Pavilion dv6-6b19wm wifi not working not

  Hello, I recently did a factory reset on my computer because it was really slow and now my laptop is not connecting to my wifi. I even pressed the button wireless on my keyboard, but it still shows an orange light of signalling that it is switched off/disconnected. I also tried to connect through the LAN / Ethernet cable, but it still does not work. When I go to Device Manager and click on 'Network controller' it says in the status of the device: "the drivers for this device are not installed. (Code 28) - there is no driver selected for the item or a set of device information. What should I do to correct this beings I can't connect to the internet for this problem on my laptop.

  Here is some information on my computer:

  Product name: HP Pavilion dv6-6b19wm

  Product #: A1T65UA #ABA

  Reinstalling the software/drivers:

• HP Pavilion DV6: Wifi does not work after re-installation of Windows 7

  I recently had to format my drive and reinstall Windows 7, but after reinstalling, nothing really works.  USB is not recognized, Wifi is not working, etc...

  I realized that all new drivers need to be downloaded, but I can't find the original driver disc and it is difficult to download them without being able to go online.   I could find and install a driver for the network card ' Intel Centrino advanced n + WiMax 6150.  I can see that the driver is installed and up to date, but it is still not discover all networks and during troubleshooting, it says that no hardware installed.

  At this point I think maybe it's a hardware problem, but the wifi worked very well until I resett everything.  Anyone know what I can do?  Are there additional drivers, I need for the network card start work.

  Thank you

  Here is the link to the latest version of the driver for this card.

  A first or second on the list according to bit W7 version you have installed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23723

• Pavilion dv6: fingerprint reader not working after update to Windows 10

  Hello

  Recently, after the update to Windows 10 fingerprint reader works just on my Pavilion dv6. I tried other methods I found on the forum, and I'm looking for a driver get the fingerprinter reader to work. I tried to download HP SimplePass (which has been removed from my PC by updating the operating system) in the hope he would get my fingerprint reader to work, but no luck.  I also looked in the settings (in Device Manager) for biomeric devices, and I found a driver with an exclamation point, indicating it wouldn't work. So, right now, I need a solution to get my to work on a fingerprint reader.

  Thank you

  Nathalie

  Hello @Nikil1503,

  I don't know that if you follow exactly the documents there will be no problems. It will be a good learning experience!

  After the return to let me and the community to know how it goes.

  You're welcome, have a great day!

• can I extend the ram up to 2 x 8 = 16 GB in the pavilion dv6-3050tx?

  can I extend the ram up to 2 x 8 = 16 GB in the pavilion dv6-3050tx?

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/document/c02621602

  Max is 8 GB.

  Kind regards.

• The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook

  The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook... When I insert a dvd/cd he made just loads off noise and won't load anything. When I try to go into MyComputer to manually load theres nothing showing there just my local disk... one of my friends said that it mite Miss port or driver... could someone help please

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• The sound on my HP Pavilion G6-1a19wm does not work

  Hi the sound on my HP Pavilion G6-1a19wm does not work.   His "only" works when you use the audio plug with external speakers.   I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps.  audio device present in the Device Manager and supposedly working properly, mute is "not"on."  visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• The ODBC DSN drivers do not apperes on Win2008 64-bit Control Panel

  I try to install the CLient Oracle 32-bit on a 64 bit OS 2008, but the DSN ODBC drivers were not loaded on Control Panel... Can someone help me... as someone face this question anything at first...
  
  Thank you

  Hello

  You must look in the section of the odbc 32-bit for 32-bit drivers... C:\Windows\SysWOW64\odbcad32.exe

  It will be useful,
  Greg

• Webcam on the Satellite A200-175 does not work - error code 10

  Hi all

  I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
  The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
  Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).

  I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).

  I'm a bit of idea, so any help would be appreciated!

  Hello Franca

  It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.

  Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?

• HP Pavilion dv7 keys does not work

  Since I've upgraded to Windows 7 Pro on my HP Pavilion (dv7 - 1223ca), several keys on my keyboard have not been working properly. I've upgraded and downgraded my computer several times, and this has not happened before. When I press the G, H, BACKSPACE or the apostrophe key, they will not work unless I press one of them around thirty or forty times. As soon as I get one of them working, they begin to work properly for about five minutes, and then it goes back to the break.

  It is a major problem that I use my laptop for work. I tried to reinstall the drivers for the keyboard, but this did not help. Someone at - it ideas?

  Also, two of the keys on my keyboard (alt and del) went out completely and don't come back. Is there a chance HP would be able to replace these?

  On the key that came to the wide, you will need to replace the entire keyboard, i.e. If you are unable to insert this back...

  Keys does not, this looks like a keyboard problem, but we can check in the BIOS as well. In the BIOS, go to security, select Admin password and press on enter, now try and test the keys here, if it doesn't there as we have confirmed the problem keyboard...

• U330 Windows 7 drivers does not work

  Hello

  I was recently in the process of updating all my drivers on my u330-2267EU for the latest versions of Windows 7. I was waiting for this update on the site of drivers for a while since I was able to get Windows 7 installed before Oct. 22 release. I'm running Windows 7 64 bit and I'm running into some trouble with these latest drivers doesn't work does not correctly.

  (Using Win 7 64 - bit Versions) U330 driver download site: http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16

  Switchable Graphics: there are 2 new Windows 7 drivers related to the video I downloaded. One referring to the ATI graphics card discrete address and the other to the Intel Graphics Media Accelerator. After installing these two, for switchable graphics BIOS setting and run the switchable graphics program from the desktop after startup, the menu desired with the ability to switch the GPU to gpu performance of energy saving. When I click on the button "gpu high performance ', the screen flickers and fades to black momentarily as it should, but when the screen comes back and then wait for a few minutes, no switch, it just stays in the powersaving gpu. Suggestions?

  Power management software: I also downloaded Energy Management Windows 7 Lenovo driver for the u330. After installing the software, I was initially able to bring up the menu to change power options, but the options I chose would not involve no apparent change. After you install the program, it actually, my screen unable to change its brightness using the 'function + arrow' key combination. Also, more is when I change my windows default power supply options she adjusts the brightness of my screen. It remains just the same no matter what. The only way that I can now change my display brightness is by going to the Intel GMA graphics settings and change the settings there, but it's a completely horrible way to have to do that.

  So now that you have it, after all this waiting I have always to use switchable graphics, or properly use the Lenovo power management software. Oh yes, and I can not adjust the brightness of my screen. I have re-uploaded and re-installed the drivers several times to try to make them work correctly, but so far no luck.

  I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo noticed these problems and a fix will be available soon

  Thank you!

  see our thread here

  http://forums.Lenovo.com/T5/Windows-7-launch/U330-Windows-7-drivers-problem-amp-solutions/TD-p/16716...

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• Equium L40-10 X - audio drivers do not work on Windows XP

  I recently reinstalled XP on my equium L40-10 x. Unfortunately, the audio drivers from the Toshiba support site does not work for me - are there other drivers that are known to work?
  I didn't load the available disks and need something on the net - link?

  Thank you.

  Hi cecilrosa,

  I n t have Equium L40 but I'm pretty sure that the audio drivers are working properly. The point is that you need to first install Service Pack 3 before you can install the audio driver.

  So to remove the current sound driver and install Service Pack 3 for Windows XP. After that, you can try reinstalling the audio driver.

  Check this box!

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• HP 14 d037TU drivers do not work for WIN7 64 bit

  Hello

  Please help me solve the problem. HP 14 d037TU drivers do not work for WIN7 64 bit as below. I have try all means possible to install WIN7 64 bit player but no luck. I assume that the reader has not been certified for WIN7 64 bit.

  HP, it is not accepted as HP is one of the famous brand laptop with cart and incomplete product on the market.

  Please help to fix this.

  

  Hello:

  I just found the Holy Grail.

  Here is the link for the usb 3.0 driver, you need to know.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3467 & DwnldID = 23734 & Keyword = USB + 3.0 & lang = eng