vCops Web Interface - user interface problems

Similar Questions

• The switch Catalyst 3560 G Web Interface problem

  Hello

  I have a problem with my switch to Cisco Catalyst 3560 G. The web interface does not work (I tried IE11, IE6, Chrome, Firefox, and Safari).

  There is only displayed icons but no text:

  Cisco.jpg

  

  To try to solve the problem, I have updated the switch to its latest version of IOS (from 12.2 (55) to 12.2 SE7 (55) SE9). But the problem persists

  WS-C3560G-48TS 12.2 SE9 (55) C3560-IPBASEK9-M

  In the configuration, the web server is enabled:
  IP http server
  IP http secure server

  What can I do?

  Thank you

  Best regards
  Fabien

  Hello Fabien,

  I think I found the problem and a workaround for this.

  The problem comes from the language of the webbrowser.

  I got exactly the same problem with the same model with the same version of IOS.

  I checked with the debugging tools in firefox and I find the browser want to get (firefox in french for my case) 2 scripts:

  http:///fr/charset.js

  http:///fr/re_preflight.js

  But there isn't any record of en flash: / C3560...

  So I changed the preferred language in firefox (put English first). Reload the Web page and it works very well ;)

  I hope this will help you

  Thank you

  Jeremy

• LaserJet 4000: HP LaserJet 4000 web interface problems

  I have an HP LaserJet 4000 very old but still very functional.  When I try remotely inside through the web interface to change settings, the screen does not load correctly.

  It wants to load a JAVA runtime and I have the latest version of loaded oracle, but there must be an incompatibility.  I think that it only works with a very old runtime.  I have tried with different browsers such as firefox and chrome, but the result is much the same.

  Y at - it solution or a firmware update or something to fix this?

  You have the 600n jet direct card and the issues are known.  I think that windows 95 was the last os that could communicate and give you the web page.  You could try to download the latest firmware for your jet direct card and update its firmware using hp download managere, but to be honest I don't think it will work.  The saving grace is that you can make any changes you want in the control panel of the printer.  Just navigate the EIO menu on the printer and go through the menus.  A little more difficult, but it can be done.  Good luck.

• SLM2048 web interface with firefox 4.0 problem

  Updated Firefox 3.6 to 4.0 and now the slm2048 (firmware 2.0.0.8 & boot 1.0.1) web interface problems. I get the following error message:

  error in Pager.SetpagerHTML String contains an invalid character.

  Specifically, the problem is hyperlink to other ports in the switch port settings is missing. I tried 10 Chrome and IE 8 and the two have even worse problems.

  Someone at - it one reasonable alternative to that roll back to Firefox 3.6?

  David,

  
  

  Actually the GUI for the slm2048 is designed to work with Internet Explorer 5 to 7 and firefox is a little maybe on the GUI.  However, you can use the IEtab 2 addon for firefox.

  
  

  Once installed, you will see an emplem of firefox in the lower right of the Web page.  From there, click on the emblem of firefox and it will turn into an emblem of the internet Explorer.

  
  

  Now you will be emulating explore a Web page in firefox and should not have problems with the GUI.

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

• Problem with IP LRT224 web interface

  I have my LRT224 put in place about a week ago. It works very well for a while, but right now I can only access the web interface through the first LAN. If I use any other LAN and type the IP Address of the gateway on my browser as 10.6.21.1, the address bar will change to 'https://[::ffff:a06:1501]/' instead, and it displays the page Web is not available.

  I don't know in the parameter 'Port management'-> '802. 1 q"all my Device Management are enabled.

  Anyone know what's the problem?

  I found something, when enable https and IPV6, this problem occurs.

• Problems with the web interface of connection vcenter 5.1

  Guys,

  What don't understand me, I've set up a new virtual appliance version of vcenter test 5.1, I can connect just fine using vsphere client and console, but the web interface refuses to agree with the same identifiers. What is happening with this single sign? I really do not understand.

  You guys could help me please?

  I stumbled upon this same question.  5.1 with the search service is completely different than 5.0, this is why the others are not working.

  Here's what I did to solve the problem.  I turned on the regeneration of SSL certificate:

  1. Navigate to https://[IP]: 5480 and connect
  2. Go to the Admin tab and press the button "Toggle the setting of certification" until activated regeneration 'certificate' displays Yes
  3. Go to the network tab and change the host name.  This will trigger a regeneration of SSL (or you can change the ip address).  I don't know if change 'localhost' to something else helped, but it can't hurt.
  4. Restart the box (restart System tab button.)

  At this point, you can look at the start-up of the machine of vcenter console messages.  You will notice some messages about detection of a new hostname or IP and regenerate a new certificate.  You will see all the services to import it again SSL ceritifcates so.

  At the end of the reset, I was able to connect to the web client to vCenter!

  HTH

• jumble of text in the web interface after Web Services update / firmware

  I received a message on the screen of my Officejet 6700:

  Update recommended

  An update is available for Web Services (ePrint and Apps).

  Do you want?

  I chose to update now and it installed fine, or so I thought.

  I checked the web interface of the printer, and there is a bunch of text confused, as the code is messed up for the web server.

  I had just finished to check the status of your ink cartridges (and subsequently replaced a), so I have the fully functional Web page fortunately still open on another machine, so I can tell exactly what is forward - after on this page.

  On the tools > gauge of ink page, on the right page (old) the said table (title, first line, first column):

  Cartridges installed

  Color | Magenta | Cyan | Yellow | Black

  Part number

  Type

  End of warranty date (A-M-J)

  First Installation Date (A-M-J)

  Area of ink

  USE

  HP

  But after the software update, it says this:

  Print the self-test Page

  L@S#0456 | Number of recorded events. L@S#0462 | L@S#0552 | L@S#0450

  Use of the accumulated media

  Date

  L@S#0477

  L@S#0561

  L@S#3345

  In addition, the order "supplies" link, with a contextual text of "print order supply."

  now, says "Cartridge", with a contextual text ' block unwanted faxes '

  And "Print Printer Status Report" now says "L@S#2567".

  I went to the support section and found an update firmware, but during download and execution, after you find the printer, he says that he is already up to date and leaves me not choosing to try and reapply the update of the firmware (as is obviously what is happening through the touchscreen menu has already done).

  Should I just restore to factory settings? I think that firmware would not be changed by doing this. It is not an older version of the firmware available on the product support page, to return to an earlier version.

  Via the screen menu touch printer, a Printer Status Report print indicates the firmware version is MPM3CN1322DR.

  How to force a reinstallation of the firmware, or let them difficulty firmware which was released on 25-06 - 2013?

  I've been using Google Chrome and even had 2 tabs open in the same window, one from before the update and the second I opened after the update, so this was not a factor.
  
  I had not revisited the web interface of the printer to date, and currently, I see that the problem has disappeared!
  The version of the firmware has not changed, and I did no manipulation of the printer. I also highly doubt that the main user has nothing, because it is not tech savvy. So, the problem seems to have corrected itself.

  The only thing I see now, that I did not notice before, is that there is a version of firmware fix, but it currently says 0. I don't know what it was before, but I guess zero means that there is a patch, so the firmware didn't automatically update in order to make the problem disappears.

  Problem disappeared, but I don't know how or why. I haven't decided if I will update the second printer that is the same model.

• ACS Web Interface 5.1 does not

  We have a Cisco Access Control Server (TACACS+ version 5.1) with an additional
  
      2 port NIC card. This produces 4 ports on the ACS server(G0 through G3).
  
  After initial setup of the ACS server with an IP address on G0, I connected a Windows 7
  
      server with IE8 to G0. The ACS web interface appears (after accepting certificate) and I
  
      entered some user accounts and NDGs.
  I then connected the ACS server to a configured port with port-security on our 6500
  
      switch. The port becomes err-disabled since the MAC address does not match up. It appears
  
      that the onboard NIC on the ACS server is bonded thus producing the MAC address issue.
  To fix this connection issue, on the ACS server, I cleared out G0 and setup G2 (additiional
  
      NIC card) with the IP address. After connecting to the 6500 switch, the ACS server port
  
      works fine.
  I removed the connection to the 6500 and connected the Windows server to the ACS.I can ping
  
      the ACS server but the web interface is now unavailable unlike before. I do not get a
  
      certificate warning on IE, it just states that internet not available.
  On ACS, the 'show' status of acs shows all the processes are running and initialized.
  Any help would be appreciated. It has got me stumped as all I did was change NIC configuration
  
      on the ACS server.
  Antonio
  
      

  I wanted to check if the failed to load web interface could also be due to something on the 6500 switch.

  So far:

  You have been able to see the Web interface with the ACS configured on G0 and directly connected to the PC Win 7.

  With the G0 set to ACS, you saw some MAC problem and so no web interface.

  With the ACS configured on G2, you can test the ACS server when it is directly connected and connected to the 6500, but in both cases do not display the web interface.

  So, it seems that you have two options:

  (1) seek to solve your problem of port security 6500.  (You have access to set up the port-security 6500?)

  (2) fix the G2 interface configuration.  If you do not see the web interface with the Win 7 PC directly connected then there is something wrong with the config on GBA.

• Web interface error - could not contact the server at this time

  Hey all,.

  Immediately after completing the deployment of the new 2.1 UM I'm running an obstacle when connecting to the web interface. After authentication, with the web interface, I get the following when you select my user type (service provider or aggregator - anyone):

  

  I redeployed the VAPP twice is not a transient deployment problem. Networking seems fine - I can ping from areas on the Internet from the SUSE console. Not sure that this message refers on the 'server' is in contact with. It is deployed on ESXi 4.1 in a cluster vCentre vswitches standard, nothing special.

  Any ideas?

  Kind regards

  Daniel Whittaker.

  Daniel,

  When you get the message after installation, click OK and then refresh the page or click F5.  The message should appear is no longer.

  Kind regards

  David

• Web interface for updating Subvars

  Greetings,
  
  I am trying to build a Web interface where users (Admin) can go and update the Subvars and run the Calc and BR, required if necessary.
  
  Have someone at - it never built something similar to this?
  
  I intend to call "MXL" scripts from the web interface and pass the Variables by the web itself (server, App name, name of the BD, Subvar, the new value)
  
  and the Alias planning to call the relationship DB. And users can run the calc and BR, once they will update the Subvars on the web itself.
  
  Is - this sounds feasible design?
  
  Thank you.

  The problem that I see with this approach is it is given too large a group of people and the stage of changes to each other. For example, the user has changes in the month of Jan and the coup of a calc, but user B m at roughly the same Feb moment. Of course, given that the variable can have only one value, Feb WINS and the user has no idea that his calc does not work correctly.

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• GS752TP - Slow Web Interface

  Does anyone else have this problem? The web interface is so slow to become almost unusable. It loads the background then hangs just for a good 20-30 seconds. Sometimes, it loads the buttons... sometimes it is just with a white background. When I get to enter the interface by clicking on a button sometimes loads data... sometimes it is just there and I have to close the browser and start over? Someone at - it suggestions? It runs later (and also the initial firmware).

  -Eric

  I had this same problem for a while.

  As a "fix"------"Workaround"------"bodge" I used the Portable Firefox 3.5.6 put up-to-date of changes to VLAN\LAG settings.

  Really, it's not perfect, but works.

  /Pokes Netgear with a big pointy stick!

• Web interface and communication series

  I just started reading on the user Web interface. It seems useful, but I could not, how do I connect an application user Web interface with some series/USB instrument, for example. Is it possible to have VISAS screws normals and other toolkits within the user Web interface? Or maybe, it would be possible to develop a stand-alone application using LabVIEW (and all the screw and tool boxes that I am used to), and then import into the user Web interface?

  Thank you

  Marcelo

  That's basically correct - LabVIEW code cannot be imported and you can not directly interface with hardware - and is the only authorized communication with web services (LabVIEW or otherwise).

  So if you have any material you want with the Web Interface Builder interface, you will need to build a web service of LabVIEW that outlined some of the features and then consuming the Builder UI with the functionality of the Web Service to import.

• Integrate the ICB with web interface

  Hi all

  We already have a CVI writes to order any of our instruments. We must develop a web interface to pass parameters to the CVI. In addition, currently the data is generated by the BCI as .csv files. What more we need to do is to transfer the data to a database as well. I did some research and discovered that Measurement Studio provides a .NET environment to control instruments. In addition, I think that the CVI/SQL Toolbox should be able to solve my problem of database. My question is who will Measurement Studio I want to integrate the CVI already present and communicate with him using a web interface? If so, what me does establish this communication?

  Thank you

  Kanu

  Kanu,

  Unfortunately, there is no easy or good way to create a web interface with CVI directly.  You can do this in Visual Studio with Measurement Studio, but you will at least need to the professional edition to do because you want to use web forms.  There are some resources with more information on the web forms, including this Walkthrough.

  Since you already have an investment in CVI, I don't understand why you don't want to throw just as work on.  According to the works of your code, you have a few options on how you try to bring together these two languages.  You can try to make your C code in a DLL and call it in the .NET application, as in this discussion of the call to invoke from managed code.  However, a better solution would probably be to use Of network Variables to communicate between the two programs.  Then, you can limit the .NET application to be mostly just a control interface that writes to the network variables, which are then used in the CVI program that you've already written.

  Hope this helps,

  Jen W

  Technical sales engineer

  National Instruments

  NI.com/support