Some tips for a beginner

Similar Questions

• Recommendations/tips for a beginner contributor?

  Hey all!

  I started to contribute to communities of support today, but the interface may seem a little tricky to work with sometimes. I was hoping that some useful people would be willing to share tips/advice for someone new in the region!

  Currently, I am just by clicking on the 'Content' link and refreshing for the new questions to answer, although sometimes sorted by "involved" to follow up on the questions answered. Really hoping to find some easier ways to use to check on different communities or focus on specializations.

  Thanks in advance!

  Take a look at this plan of the Site communities and categories.

  TT2

• Some tips for the Windows Live Mail 2011 0x8E5048 fixing error code?

  Live Mail not keep open, indicating that my calendar is corrupted.  Above the error code

  Hello EugenePressman,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Need some tips for first cs6 video editing

  I recorded it professionally in his room with a microphone mc proof is really good quality video and sound quality is perfect also.

  I recorded with 2 devices with different angles, I'll remove the noise of two video clips and use the MP3 recorded in Adobe Audition CS6 (amazing program) I want to have the 2nd recording angle put in the video so that it shows the main video, then the 2nd in a small box in the upper corner, how can I do this?

  Also any advice people can suggest for me on Speedgrade CS6 or After effects CS6 that will enhance the viewing experience will be highly appreciated.

  Last reading the thing at first and after effects is very slow, no failure of my laptop is extremely fast, but one thing that I've had this laptop for about 8 months and does not update the graphics card, it would be one or there at - it a way to solve this problem? When I try to playback in sequels it says something like ' 0.9 / 29 frames (not in real time), I downloaded quicktime, I thought it was real time?

  Thank you in advance

  I want to have the 2nd recording angle put in the video so that it shows the main video, then the 2nd in a small box in the upper corner, how can I do this?

  This is referred to as a PiP (Picture in Picture). It is easy to do. Simply place your Clips, camera 2 and camera 1 on separate video tracks. 2 camera spot on a weaker, you place the camera 1, say Camera 2 on 1 track video and camera 1 on video track 2. At that time, camera Clip 1 will cover the Clip on Camera 2. Now, with the camera 1 Clip selected, go to the effects (not the effects Panel) Panel and find the movement, one of the fixed effects. Watch twirl that open, to reveal the scale and Position. We will use these next. I would first pay scale, to resize the Clip and then position, move it to where you want. Fact.

  I often use the grids of the alignment for the positioning of the PiP, but with but a PiP, not sure you need this. Yet, see this article for grid alignment: http://forums.adobe.com/thread/476984?tstart=0

  For your Audio files, instead of a highly compressed MP3, I would export it as WAV/PCM 48 kHz 16-bit, for import in PrPro. The Audio will be better, and in accordance with the standard will be faster.

  For the rest, I highly suggest to read about these programs. Adobe has a lot of good tutorials on Adobe TV too. Their use and power, fill books. There is also a very active and very good forum just for After Effects, with a lot of seasoned, professional who can help you if you get lost. As Jon States, read everything in the help files, these programs are a very good start.

  Good luck

  Hunt

• Fusion/Windows 7 tips & questions for a beginner

  Hey guys (and girls) I've been a linux user especially lately so I more or less missed the boat on windows 7 but I'm looking to load on my MBP, but I have a few newbie questions if can help people.  I tried to do a search, but I think that my terminology or the lack of good conditions got in my way.

  Some background information, I use a unibody MBP with 4 GB of ram 5.1 which has Snow Leopard and VMware fusion 3.01.

  I am interested in what would work well with the merger of two ways, bootcamp vs install a vmdk and 64-bit vs 32-bit...

  First of all is it an advantage to running vmware fusion with bootcamp, IE merge use the bootcamp partition?  What I see better performance if I instead of use the bootcamp created a virtual machine (vmdk) within the merger?

  Second question is about 32-bit vs 64-bit. I'm under 4gig of RAM which I will devote only 2gig in vmware. Is it interesting (stability, or performance) to the use of 64-bit within the fusion flavor (vm installed not bootcamp) or I'll be better with 32-bit installation?

  If I'm melting point using the bootcamp partition, is third question - interesting to settle current with the 64-bit or 32-bit.  It's merger would provide more performance with the bootcamp windows 7 32 bit, and vice versa (or it does not matter)

  Fourth question, seems, the fusion installs things when you use the bootcamp partition and I guess I'll need to install the tools as well.  That will cause problems, or headaches when I boot physically in training camp, that is, drivers of devices for non-existent devices. What video, nvidia 9600 m in bootcamp vs virtual gpu fusion provides.  I can't wait to see problems when I turned off and restart under bootcamp.

  Last question, I will visit the hell of activation if the bootcamp partition uses two cores, but I just dedicate a molten core when you point the merger to use the bootcamp partition. I don't want to always have to re - activate win7 because when I boot in bootcamp, he sees two hearts but merger only when.

  Thanks in advance

  Mike

  take a deep breath... OK... =)

  Firstly there is an advantage to running vmware fusion with bootcamp

  You get better performance out of hard in this instance. With the help of a physical disk is not the OS X volume would be better than BootCamp, but of course only applicable on a Mac Pro. Rationale: with multiple partitions, the needle on the hard disk has a long way to the second partition, back and forth all the time between Windows and Mac does travel. A hard, as a general rule, would include a contiguous space due to the Mac file system optimizing the layer of block on the fly.

  The advantage of using BootCamp is if you need to take advantage of the full potential of the Mac hardware in a dedicated Windows environment. Such use might be to, say, play games of high quality, latest (Call of Duty, anyone?), at higher resolutions / great detail. Ditto for just about any application for Windows which needs a beefy video system (OpenGL rendering, CAD, stuff like that)

  Is it interesting (stability, or performance) to the use of 64-bit within the fusion flavor (vm installed not bootcamp) or I'll be better with 32-bit installation?

  I would say that no, there is no significant advantage to the use of 64 vs 32 bit in a virtual machine. Stick to 32, it is more compatible with the software and any equipment that you choose to give to Windows (driver for 64-bit stuff support is usually OK, but there is no compelling reason to do it in a virtual machine)

  If I'm melting point using the bootcamp partition, is third question - interesting to settle current with the 64-bit or 32-bit.

  Windows 7 is not supported by BootCamp by Apple, so probably 64 bit will not be 100% working drivers.

  Fourth question, seems, the fusion installs things when you use the bootcamp partition and I guess I'll need to install the tools as well.

  We install tools (drivers and additional software), as well as some tips for handling activation. So we keep some of the files that Windows uses to verify that it has been activated, but due to the change in material Windows must activate two times. Record us each activation, detect when Windows runs in our VM and present key information and activating appropriate to the operating system (to keep him from having to activate every time you pass ="

  What video, nvidia 9600 m in bootcamp vs virtual gpu fusion provides. I can't wait to see problems when I turned off and restart under bootcamp.

  I did not talk about all issues related to the video does not when it is started normally. Windows detects that hardware is present at startup, check if it uses drivers and goes from there.

  Last question, I will visit the hell of activation if the bootcamp partition uses two cores, but I just dedicate a molten core when you point the merger to use the bootcamp partition

  N ° again, we keep the profile "enabled" and save it.  When the BONE is introduced in the merger, we use our activation profile.  When you started in native mode, it uses that have never appeared by activating in Bootcamp.

  The direct answer to 'can I use bootcamp or hard' would be: depends on what you want to do with the virtual machine.  If it's general things, you're good... If you're a gamer or CAD designer, BootCamp is a good option.  =)

• Some useful tips for photoshop touch?

  Anyone have tips for Adobe Photoshop Touch, it's new to me and I'm not 100% with him immediately

  Thanks for the reply on my forum

  Build-in tutorials should be a good starting point for you.

  In addition, you can watch some video tutorials... http://TV.Adobe.com/search/?q=Photoshop+touch&SortBy=relevancy

  If you have any questions, this forum is the place to ask. We already have a lot of good information here. For more information, that you don't see here, there is a community of people who can help you

  Hope that helps.

  -Guido

• coldfusion for a beginner book suggestions

  Can someone please suggest some good references on ColdFusion for a person who came from a background of C/C++ development? I don't do any kind of work in Flash (Flex only) at the present time.

  My library has the books below

  ColdFusion_MX_Bible 2003 edition

  ColdFusion 9 Web Application Construction Kit Volume 1 mai.2010

  Programming ColdFusion MX 2nd ed (O'Reilly, 2003)

  Macromedia Dreamweaver 8 with ColdFusion ASP and PHP training from the Source

  Hack Proofing ColdFusion

  Foundation Flex for developers - oriented Applications with PHP, ASP.NET, ColdFusion and LCDs

  Or, is there another book I should read, too, for which I need to apply for my library.

  I know that all of them are useful, but if I have time to read only one that one should choose who would be familiar with most of the linguistic nuances.  The 2003 edition of the Bible of ColdFusion would cover most of the regions? I recognize the most recent reference would be the documentation from Adobe.

  I know that learning a language there are books beginner, intermediate, advanced, reference and necessary (as for the C is the book by Kernighan and Ritchie and C++ is Stroustrup) books.

  This is so that I can read all the books when I had the chance.

  A quick Google image search offers some tips http://www.forta.com/books/coldfusion/ and http://www.bigwebmaster.com/ColdFusion/Books/ as well as http://www.amazon.com/ColdFusion-Books-for-Beginners/lm/355FVU99NWLV8

  But any suggestions or advice of this group would be appreciated.

  Thank you

  I did open one since the CFMX7 edition, but I think that by Forta et al CFWACK books are considered to be the best of breed of the CF to printed books.

  That said, I've always had more of these books online documentation.  But I would still be working rather things myself just to be guided by someone else as to how they approach a task.

  Another consideration is that I do not think that CF has complexity index that C++ has, so I don't think that there is a need 'base', 'intermediate' and 'Advanced' books for CF.  The different volumes of the CFWACK are not really an increase in complexity, but just to start with the absolutely necessary building blocks, penetrating the less necessary bits and then more esoteric feature.  But I do not think that these divisions are really made based on complexity.

  And as with any other language, it is good to keep an eye on the community and what people are doing.  I learned a lot just trying to answer popular questions here, for the reasoning; but there are a lot of CF bloggers out there who publish a lot of interesting material.

  --

  Adam

• Tips for when your webcam is not detected

  EDIT: If you have recently upgraded to Windows 8 and experience this problem, please read this document.
  
  Here are some tips to solve a problem of webcam not detected.  I see this question get asked a lot so here are the steps you should take to resolve the problem.
  
  To start, you make sure that the device is detected by Windows.  The following instructions are for Windows 7, but should be very similar to Windows Vista and Windows 8.
  
  Option 1: Check Device Manager to make sure that it works correctly.

  1. Right-click the Start button, type "Device Manager" and press ENTER.
  2. Once charges Device Manager click 'View' then "Show Hidden devices."
  3. Locate the section "imaging devices".
  4. Note If you see the webcam here.
  5. If the webcam is listed, click it and check that it is not 'disabled '.
  6. If the webcam is listed and disabled, go to Option 2.  If the webcam is not listed, you will spend on Option 4.

  Option 2: Allow Windows to re - install the device.

  1. All remaining in the Device Manager, right click on your webcam and select "Uninstall".
  2. If you are prompted select "remove driver and driver package".
  3. Restart your laptop and allows Windows to attempt to reinstall the webcam.
  4. If Windows detects the webcam check the operation of the webcam.
  5. If Windows does not detect the webcam and install move to Option 3.

  Option 3: Manually install the drivers for your webcam.

  1. This site allows to determine your product/model number.
  2. Visit the Page of Support HP and use this product number to visit the specific page of your product.
  3. Go to "Drivers and software" and are looking for the driver for your webcam.  NOTE: the drivers for the webcam are sometimes provided with the YouCam software.
  4. Download and install this driver.
  5. Restart the PC.
  6. Check the features.

  Option 4: Manually re - detect the hardware.

  1. Disconnect all external devices.
  2. Shut down the laptop.
  3. Remove the battery and AC power.
  4. Press and hold the power button for 10-15 seconds.
  5. Reinstall the battery and AC power.  Then turn on the laptop.
  6. Once Windows is loaded back to the Device Manager.
  7. Selection 'Action' and then 'search for material changes.
  8. If the Device Manager detects hardware let settle.
  9. If Device Manager does not detect the see material Option 5.

  Option 5: System Restore and system recovery.

  It is very well described in this document.  Note that all data not saved prior to a recovery will be lost.

  6 options: Repair or replacement.
  
  If none of these solutions worked for you, it is likely that you are experiencing a hardware failure.  It is possible to replace the webcam or reinstall a loose ribbon cable.  However, it is one of most difficult repairs on the laptop.  If you want to try this repair, you can visit your laptop support page and go to the section "manuals".  There is normally a "maintenance and Service Guide" for laptops, this will cover the disassembly of the laptop.  You can then use HP parts Surfer to locate the part for your laptop.

  If you do not want to attempt a repair yourself you can ask HP about a repair.  For customers in the United States / Canada, you can call 1-800-474-6836.  If you are not in this region, you need visit the HP Support Site to get contact information for your region.

  I hope that everyone considers this information useful!

• Advice for a beginner eager to remove stray light

  Hello

  I have some pictures of drone that needs a correction. Theres a lot of white, where the Sun is straps down.

  I had a CP filter on.

  I know that I must read manuals & watch a lot of help videos, but I was wondering if I could get some tips to speed up what I need to do or even research.

  Attach a couple of stills of the sequence to show my problem.

  Thanks in advance.

  Todd

  

  You are stable there high... see this edge shining upward from the line of each color? This means that there is a hard limit there... all data ends in the same place on the screen. Cut.

  Not much to do for this clip. The top line should probably be about 100 or near it, if you get a few quirks that can slip when you take an image severely cut down too low. It's basically a situation of re - draw.

  Data loss on the lower end, in shadow, is one thing. Loss of data through a large part of what needs to be just the part 'lighter' of an image is usually a loss of criticism. So... to protect these highlights. Especially with large blocks of sky and water, this can be the job sometimes.

  Neil

• Can you suggest a host for a beginner using dreamweaver?

  Hello!  I am a total web construction beginner so please be nice :-)  I built most of my site using dreamweaver, but I have problems to get in touch with technical support to my chosen host (lunar pages).  Supposedly they offer 24/7 support, but it took me about 10 hours to talk to someone after three calls waiting for 30 minutes each, but also to present a ticket online.  Before going further I think cancellation of my payment by credit card with them and from new with a new domain on a new host to avoid dealing with DNS transfer.  Anyone has a suggestion for a good host for a beginner by downloading a dreamweaver site?  I'm looking for a host who will have an easy learning curve (because I'm new), uses cpanel, has a quick and quality technical support and supports PHP and MySQL.  I want a legitimate company with no BS.  Of course, price is a factor, but I'm willing to pay more if the quality of the company is worthy of it.   I work on a mac, if it's at all important.  Any suggestions are greatly appreciated as it was difficult for me to assess through searches random review hosting companies. Thank you in advance for your help!

  @

  For my small sites (those with little traffic and no e-commerce site), I have switched to Hostgator.com and have had some good results with them.

  Their documentation and their support have been great so far.

• anyone can share me some references for business rule

  Hi, I am a beginner for business rule.
  And I learned "The administrator of the Hyperion Business Regulation Guide", it is very useful.
  But anyone can share me any student guide for a simple way to start with the business rule.
  
  For example, I learned the workforce planning are example of rule. I found each rule has been to start with "SET CREATENONMISSINGBLK ON;", but I can't find any description for it in the Administrator's guide.
  
  Also, in the form of Member, each begins with "[OpenInputValueBlock]" and end with "[CloseInputValueBlock]".
  Should I write the formula in this kind of structure?
  
  In all, can someone share me some references for how to start with BR as "hello world".
  
  Thank you very much!

  Management rules are just as improved essbase calc scripts so basically use the same language, the best source is the ref of tech essbase that contains information about the functions and calc commands.
  If you go to-http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?calc_func_chap.html
  Calculation of sections and orders of calculation functions are those to have a read of.

  [OpenInputValueBlock] is mainly used by workforce planning applications, the code is converted when it is pushed to essbase planning, have a read of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/ch12s07s03s02.html for more information, you don't need to code it well.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• Satellite P300d 10v - found some drivers for Vista

  Hello!!!

  My laptop is Satellite P300d 10v and I coud not found some drivers for vista!
  I look in the page drivers toshiba and a find some drivers as a some other display drivers driver Bluetooth!
  When a driver install package value my easy touch keys does not work!
  Also a woona install win xp instead of vista, but a cant find any drivers for this laptop (p300d 10v) sata!

  Sews enyone had the same problem?

  Help, please!

  Thnx!

  Hello!

  If he chooses the compatibility, he will lose a little performance. So, it's not a good idea ;)

  The best way is to load the SATA drivers. It can also create a clean Windows disk with nLite.
  http://www.nliteos.com/

  Good bye

• New tip for iPencil

  Is it possible to buy a new tip for iPencil?

  So far, they are not listed anywhere in the Apple Store. Call the AppleCare and see what they can do for you.

• Tips for an A60 - 181 RAM change - need information:------.

  I have an Equium A60-181 according to the specification, this is a P4 3.20 GHz HT with 2x256MB DDR RAM FSB 533 MHz and ATI 7000 IGP graphics processor.
  Since I bought it 5 years ago, I've had random blue screens of death, the corruption of the system folder (necessary to re - install using the DVD of recovery of product 2 times) although I implemented with her for many years.
  Now this week it blue screens so many times (and green) with different error messages that, after verification, it with memtest86, I had confirmed my suspicions the RAM is faulty.
  I have found what I believe, it's slot compartment memory but I can only find 1 x 256 MB of RAM DO not 2 modules and for some reason it's FSB PC2700 333 MHz DDR RAM 533 MHz as advertised.
  Anyone know where to find the other RAM I opened to all other panels, but all belong to the wireless adapter and it has connections associated with.
  Also is it normal to find a RAM with a speed that is located under the advertised FSB? I am still a bit confused about this because if I had to buy a new memory module, I need to correct type because I've heard quite matched DDR makes Windows unstable.
  In any case, I remove the memory module is visible that the machine always starts up, but with only 256 MB RAM, however if I turned it in his unstable state with the lack of the module it would turn on and stop instantly.
  It seems obvious from this behavior that the RAM problem is one inside, that I cannot locate and probably fixed to the motherboard.

  So my questions are the following:

  Where is the other module DDR 256 MB, do I have to strip my laptop out to have access to it?

  Assuming that I have to replace the two modules DDR RAM is compatible with this particular model?

  Given the age and the specifications of the laptop, this return to Toshiba would not be a viable option so I'm more than happy to fix it myself. If someone could recommend some links for a repair site or perhaps a repair I would really appreciate it.

  see you soon,

  Richard S.

  Hi redhawk,.
  some machines have a ram installed under the keyboard...
  and some machines have ram installed directly soldered on the motherboard...

  I think that it is not the ram...
  Renew the thermal grease on cpu and gpu.
  in most cases, this fat dry out and cause failures...