Some users unable to connect to applications

Similar Questions

• Unable to connect my application...

  Hi all

  Yesterday when I tried to connect my application of Cascades...

  I found that I can not export Release version...

  Even in eclipse I can't sign bar file is @.

  But my friend in Italy can do export Release version.

  I'm not sure it's a local issue, I asked another friend in Taiwan (as where I am) but he may sign with success...

  Any way to solve this problem?

  Thank you

  Simon

  

  Now the signature process is back...

  More than a day... @.

  Thank you

  Simon

• Application user unable to connect

  Hello
  
  Application user not able to connect but sysadmin are able to connect to R12 upgrade application.
  
  Please suggest remedies.
  
  concerning
  ANUP

  Hello

  Please stop application services, manually compile JSP files, start the services, and then - check the steps are described in (Note: 467562.1 - Blank Page access R12 - ' lack of class: _RF' in OACore application.log).

  Kind regards
  Hussein

• The main user unable to connect to local devices, work of guest user

  I have problems that I believe are related to my local network communications, but they seem to occur only when you use my main user account.  When I go to my 'guest' account or another account with administrator privileges - the problems do not appear.    Here are the symptoms:

  -My laptop connects successfully to the internet via a gateway generated by my Apple Time Capsule.  This also works if I connect via an Ethernet cable connected via the time Capsule even (Apple 3 to Time Capsule).

  -My main user account will not connect to my printer (error: "printer not responding").

  -My main user account does not connect to my Apple Time Capsule for Time Machine backups, etc. (error: "no available backup drive - try to save again when Time Capsule 3 to is available").

  However my guest account and a newly created user account (Administrator rights) to connect to the printer and Time Capsule without problems.

  This connectivity of the single user account problem seems to persist if I use Wifi or connect to the Capsule of time directly via an Ethernet cable.  I am baffled by this problem.  I recently reset the printer system, restarted my router, checked the driver print and then through the process of restoring my laptop to a month using Time Machine backup copy (interesting that which helps the OSX restore the functionality of the laptop was able to see the Capsule of time...).  After this restoration, everything worked for about a day.  Then the problems of connectivity (only on my main user account) once again failed.

  I'm no one exert by definition, but I've been a Mac user for many years, so I'm not so much a new user.  I wonder if my network card has problems.

  I would like suggestions for measures to take.  Thank you!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Difficulty to configure Windows Live Essentials, unable to connect to applications with a Microsoft operating account

  I am currently trying to set up parental control and accounts of e-mail for my children.  I am running Windows 7 (working group, but currently on a group of houses), I installed Windows essentials three days ago.  When I click on the user account I am redirected to connect to Windows live Family Safety, where I quickly said that "my password or email is incorrect, please try again."  My log in details are very good, (I changed the password twice, added to an alias, spoke to Live ID twice).  I couldn't connect at all when I connect to my Microsoft account to access the fss.live.com in this way I'm told I'm not a parent of an existing family and around, I'm going again.

  I thought it was a problem specifically related to the safety of the family, but when I tried to set up my account @outlook.com to synchronize with Windows Live mail 2012, once again, the password is rejected even though I can log in and access my Inbox via firefox.

  Any suggestions on what I can do to solve these problems?

  I actually fixed me this problem.  It is that I have a two-step process of verification of my microsoft account who don't like no other applications like Windows Live Mail 2012 and Windows Live Family Safety.  I had to use a code app (generated in the section of the security of your Microsoft account) password, instead of my usual password.  All fixed.

  Three days of hell, 4 cats with Microsoft support, 2 phone calls with microsoft technical support and the suggestion that I have to contact my system administrator or pay for outside access to fix it.  All this because having not used codes app before that I didn't know that's what they do!  And nobody told me to use for my paper application code in.

• The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

  I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

  Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

  I don't know that someone there can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to applications using a network

  Victorinox original title: network Ethernet NIC network adapter wireless network device

  in a particular network m not able to connect apps (that runs without a browser) to the network. It goes very well in the browser. This problem goes away if I use another network.

  Hello Agam,

  1. What are the applications that does not connect to the network?

  2. do you get an error message when you connect to the network?

  3. do you use a Wi - Fi Hotspot?

  Perform the steps from the link below and see if it helps.

  Turn Windows Firewall on or off (Windows 7)

  Warning: Firewallsoftware can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.

  Answer please if you have any questions.

• Windows 8 user unable to connect to the public AT & T Wifi networks (McDonald's, Starbucks, FedEx desktop, etc.).

  I searched here and I have not found anyone else with this issue, but I can't be the only one.

  In the event that I am the first, my problem is that I can't connect to the public AT & T WiFi networks; McDonald, being the most common location.  It appears in the list of wireless networks, but it takes forever for the McDonald's to open web page in the box that says something like "Connect to the Internet" or words to that effect.  Finally after clicking this check box, a message appears at the bottom of the page indicating that the webpage is not responding; Click to refresh it.  No matter how many times I try it, nothing happens.

  I have Windows 8 on a Toshiba Satellite.  It's a new laptop comes with Windows 8; No updates to otherwise than to buy this new laptop.

  What is strange, is that I am on a WiFi network at the moment.  "Wandering WiFi" to be precise.  But I tried to get on AT & T at Starbucks earlier this evening and had the same success that I had at McDonald's.

  I'm pretty sure that I don't mess with settings wireless on my pc but I can't say that for sure 100%.

  Sorry to see that you are having problems. Please, try the following.

  Restart the device

  Make sure that all the updates have been applied.

  • Open the network connections Panel
  • Select the network connection corresponding to either right click (mouse) or hold by selecting (finger).
  • A Context Menu will appear. Please Select forgotten network.
  • After the network connection is dropped, please reconnect.

  If that solves the problem then great! If this is not the case, let know us and we will try something else.

• Unable to show the application created

  I have some users that a workspace is unable to display applications created. However, they can select with the arrow keys and assumes that the sequence of the application. For example, Live and Test application is created. User must press the arrow down 2 x key for access to the test application to select. However, some users are able to view applications. all users use IE7 and use HFM9.3.1

  Check the following Internet Explorer settings:

  Go to Internet Options: security, custom level and enable script put on windows without size or position constraints allow it.

  Restart the services.

  Try to connect in twelve... Problem should be solved.

  Kind regards

  Malezieux

• Cannot resolve IP # so unable to connect to the internet on my laptop. Can diagnose, but not repair. Why?

  I have windows xp on the desktop & windows vista on computer dell laptop. For some reason unable to connect to internet on laptop, I took it on vacation.  I wasn't able to get on the internet for 2 weeks at the home of parents therefore had to use his laptop with his internet connection.  I have locked up something on my own.  Office IP #192.168.1.1 but phone's IP #192.168.1.0. What can I do? Thank you

  Hello Bamzplaces,

  Thanks for posting in the Microsoft Answers forum! The IP address of your laptop must be assigned by DHCP through your router. Proceed as follows to make sure that your laptop computer to obtain an IP address automatically:

  ·          Open network and sharing Center via Control Panel or by double-clicking on network control and select Properties.

  ·          Click on to view the status of

  ·          Click on Properties

  ·          When Windows asks your permission to continue, click continue .

  ·          Select Internet Protocol Version 4 (TCP/IPv4) , and then click Properties

  ·          Verify that the obtain an IP address automatically and DNS server obtain an address automatically are selected.

  ·          Follow the same steps for the connection of your Internet Version 6 (TCP/IPv4) Protocol

  ·          Click OK and exit to the desktop.

  I would then recycle your adapter to disconnect manually for 10 to 20 seconds and then reconnect. Your connection once we connected is displayed, try to connect to the internet.

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect with the sysadmin user applications

  Hi all
  
  We cannot connect to applications with user sysadmin
  
  check all possible alternatives of there we cannot connect and finally we program the password by FNDCPASS
  
  VERIFIED SOLUTIONS:
  ==============
  (1) locked account - no.
  (2) Guest user password - valid and check with to validate the password function
  (3) checked tablespace APPS_TS_IDX space - enough space available
  (4) checked signon profiles all who are very well
  (5) No person changed the password before there is no activity for 2 days
  (6) active in fnd_users and all are looks good
  sysadmin 7) validation through fnd_web_sec
  
  Select apps.fnd_web_sec.validate_login ('SYSADMIN',' & pwd') of double; -display "N".
  
  Finally reset us the password with fndcpass but the customer claim the CAR for that matter
  
  Please give me your valuable inputs to this so that it will be useful in the future to support
  
  
  
  Thank you
  Pavan

  Hello

  So in my case the hash value has been changed according to the post above to right?

  In your case, the password has been changed and this has changed the hashed password that is stored in the table. When you have provided the initial password, the FND_WEB_SEC hash and compares with the hashed value and it returns N because the hash values do not match.

  Can U please tell me how this change in the hash if no users changed the password earlier?

  It represents the value has changed because the password has been changed or the hashed value has been changed manually.

  Thank you
  Hussein

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before