Sonido driver no reconoce allows usb

Similar Questions

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel

  My Wireless Mobile Mouse 3500 driver does not allow me to control the scrolling of the wheel. When I scroll it will only pages and no option available for the adjuments to go through all the 3 lines or more. I thought that I had downloaded the wrong driver but the mouse did not bring a CD or another. Returned to download the specific driver and still can't get in there.

  Hello

  1 have you made changes to your computer recently?

  If the mouse works well, if a setting should be changed the mouse in the intellipoint software, you can contact the manufacturer of the device for more assistance.

  http://www.Microsoft.com/hardware/en-us/support

  For more information you can check the link below.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Concerning

• Assign a drive letter to a USB hard drive

  How can I assign a drive letter to a USB drive so that it is always the same whenever I plug it to make backups etc.?

  Thanks, Martin

  Plug in your device and wait for it to be recognized.  Open a command prompt (click the start ORB, then all programs, then Accessories, and then right-click the command prompt icon and select run as administrator). In the command prompt, type diskmgmt.msc, and then press ENTER.  Find your external drive in the list in the disk management window and right click and select "Change Drive Letter and paths", assign the drive letter, you always want to have.

  "MartinCC8" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I assign a drive letter to a USB drive so that it is always the same whenever I plug it to make backups etc.?

  Thanks, Martin

• How to stop "Hard drives Autorun is allowed" and "Autorun for network drives is activated" messages

  I am running Windows 7 on my computer and I got a few messages warning of Kaspersky Security software:

  "Hard drives Autorun is allowed" and "network drives Autorun is enabled.

  How turn off the power?

  Thanks for your help in advance.

  MEJaggi

  Hello Jack,

  Thanks for posting your question on the Microsoft community.

  Thank you for your question details.

  This behavior can occur if the hard drive or network drive settings are not configured correctly.

  I suggest you disable the Autorun feature and check if that helps.

  Please see this link:
  How to disable the Autorun feature in Windows
  https://Support2.Microsoft.com/kb/967715

  Note: See sub-section "Let me fix it myself" under the section "How to disable or enable all .

  Features of AutoPlay in Windows 7 and other operating systems"in the article above.

  Important: problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  For reference:
  http://support.Kaspersky.com/avzscripts/TSW.AVZ.58
  http://support.Kaspersky.com/avzscripts/TSW.AVZ.59

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows 7 x 64 upgrd dv6500z disconnected network drives allow usb drive mapping to the same drive letter

  Hello

  I'm having a problem with the readers of network disconnected allowing for new drive usb to their drive letter mappings. I have my laptop dv6500z home with windows 7 Home premium connected to my router wirelessly with a couple of shares of x 64. Now I turned off, trip and start. All right, the drive letters show as disconnected as they should. Now I plug in a USB key and it corresponds to the drive letter of one of the disconnected actions and not a new, unassigned drive letter. In Explorer, there will still be disconnected action description. Click on it and it accesses all my files on the USB key. In admin tools/disk management, the correct label for the USB key is displayed.

  So is it a problem of HP or just a problem of Microsoft with Windows 7?

  Woody, I was able to replicate that XP is not a bug but a feature. On my laptop, it originally had vista on the c drive and a recovery on the d drive partion. There are about 1 1/2 years I have upgraded Vista to XP. Then recently updated to Windows 7. kept the 3 OS's so I got triple starting capability. Then at home, I added 3 network shares, while I was using a lot of drive letters. When actions are undone, Windows maps a USB key which has not been connected before system one of the disconnected but readers still show in Explorer, the name of the drive on the part of disconnected. However, if the USB is connected to the system before, Windows appears to map a drive letter that he remembered from before.

  In my case, Windows 7 has been installed recently, so there is no remebered for my USB drive letter. I was away from home, so I had a lot of disconnected shares. In addition, now that I got a 3rd OS added to the system, I used a lot of letters from the GET go by car. It's much more likely that I would meet this feature after installing Windows 7.

• Is there a Windows 10 driver for Apple's USB keypad?

  Boot Camp drivers allow the keyboard works but not the digital side keys.  Also, the Magic Mouse seems finger roll reverse to use normal iMac.

  The Apple keyboard driver will support the 1 wireless keyboard and full USB keyboard. 2 magic keyboard requires an additional driver available in the package of drivers BC6.

  Use regedit, then look for a key named FlipFlopWheel. Change the value of the key to 1 and reboot and test.

• External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0

  Hello

  I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
  Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.

  I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.

  You have any ideas?

  Thank you

  > Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port

  USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
  I think that the HARD drive needs more 500mA power in order to work properly.

  So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports

• ACER S7-391 RECOVERY OF A BACKUP ON USB DRIVE - BOOTING FROM A USB DRIVE.

  The manual shows as below: -.

  If it is not already enabled, you must enable the

  F12 Boot Menu and once switched on and registered:-

  During startup, press Fn> + => to open the start menu. The boot menu allows you to choose which device, select the USB drive. Use the arrow keys to select the USB device, then press on Enter.

  I activated with F12 success and after pressing F12(Fn+=) only the windows startup menu appears with no possibility of selection.

  I should if Acer community member can help with instructions step by step on how to get a boot menu by selecting the USB stick to boot from.

  Thanks for help

  Boot Mode UEFI is where you were mistaken. You will need to attach it to Legacy to boot from USB drive and restore your backup, UEFI will happen to return to Windows (according to Acer).

  Your USB flash is bootable, however it does not contain your actual backup (disk image) files. If you did your USB bootable after backup, well, your backup went, as in the process of making a USB flash drive bootable, that the drive is wiped.

  I would suggest to update your Bios, the direct download of the here are more late (2.15).

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• Microsoft Notebook Receiver v2.0 device without is reconoce device USB error 43

  Conecto el device em Cuando sale the Quebec notice no reconoce el device USB error 43.la which are el problema? Tal vez me falta mas reciente driver? Is windows 7 through Windows Update has he actualizado y nada. Help

  Juan Carlos,

  The main problem that're deberias usar los foros en Español.

  http://answers.Microsoft.com/es-ES/Windows/Forum

  Solo Este're para habla inglesa.

  :)

  The main problem is that you should use the Spanish forums.

  It is only for English language issues.

  Carlos

• Driver Linux for Toshiba USB hybrid TV Tuner PX1256E-1TVH

  Hello! I would like to ask if there is a driver for linux OS for the Tuner TV Toshiba USB hybrid PX1256E-1TVH in the future. At least if this is not possible please give the instructions for the developers of the linux kernel to make a useful for us driver. I informed that they will make a driver linux for free!

  Thank you in advance!

  Unfortunately Toshiba doesn't support Linux and I assume that Toshiba will not offer driver Linux soon. Most of these devices is designed for Windows XP Home or Vista edition.
  I put t have information on future activities, but I recommend you to look for info on the Linux forums.

• Satellite L300D - new drive HARD and recovery USB loading

  I have a satellite L300D. The hard drive has failed. I have the recovery on a USB part. I bought a new hard drive and that you have installed in the laptop.

  I can boot the laptop off the usb and then when I try to do recovery it asks drivers for HARD drive or he asks the recovery DVD to be installed!

  Anyone know if there is something special I need to do to the new HARD drive?

  Thank you

  Hello

  Do you have created disk recovery or recovery memory flash USB using the Toshiba Recovery Media Creator?

  If you have created a recovery disk, you should recover the laptop using this disc

• Creating Installer bootcamp on the external hard drive instead of the USB partition?

  Hello

  I have a MacBook Pro 2012 and mountain LIon. I want to install Windows 7 via bootcamp, but my USB isn't enough grand (only 4 GB of free space). Instead, I expect to use my external hard drive. However when I go to bootcamp to create the installation program, it gives a warning that my hard drive will be erased. It is not possible to create the installer on a partition instead of him wiping the entire HARD drive?

  Thanks for the help!

  Boot Camp and Windows supports installation on an external drive. There are specific exceptions in the versions of Windows, see Microsoft for more information on installing Windows on an external drive.

• External hard drive does not allow me to backup large video files

  Hi - I wonder if anyone can tell me why the Toshiba 1 TB 3.5 "external hard drive I recently bought does not allow me to backup large video files from my PC.
  The files are located in the region of 5 to 10 GB and when I try to save these I get the message that they are too big for the destination.

  Any help would be appreciated. Thank you.

  Do you want to just copy/move these files from your PC to the external HARD drive?