Sony A57 will not get past the screen saying written on the memory card has not been completed correctly

Similar Questions

• Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

  Impossible to apply the resource DRS settings on host.the of object has already been completely created this can drastically reduce the effectiveness of the DRS

  host is having above mess on summer please help on this

  I found the correct solution

  ESXi 5.1 U3 is the permanent fix for this issue

  U3 is fix

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.

• Given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen to enter Windows. STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Help.

  I just got a refurbished Compaq 7700. It has Windows XP for drives of the refurbished computers.

  I try to boot from the hard drive (HD) and infinite loops, it is never past the initial home screen (black with blue status bar).

  I can't open the safe or the HD mode, it freezes at kmxstart.sys and then restarts again.

  Original title: given to nine Compaq 7700, BSoD, boot XP infinite loop, can't even get past the black screen, to enter Windows.

  I tried to boot from the disk and created Windows appears, then load the files, but then automatically tries to start Windows (without repair option). It then jumps to the BSoD with error code (after advice to verify sufficient disk space, to disable the driver identified, to change video cards, BIOS updates...)

  STOP: 0X0000007E (0XC0000005, 0XF773B15F, 0XF78D2520, 0XF78D221C)

  Usbccgp.sys - address F773B15F base at F7737000, DateStamp 480254d 2

  Apparently, this driver is a printer driver? I don't have a printer, but do not know how to disable it without access to windows.

  I got a new Philips 18.5 "monitor, an optical mouse and a keyboard with it.

  My guess is that the screen is the problem, because it was full again when I received and therefore not tested with the system before shipping. Not sure about the mouse and the keyboard.

  I tried a few options in the BIOS screen as well, but no dice.

  Help! Before shipping the brand new...

  I thank you and have a wonderful new year.

  Craig.

  Howdy Daavee and Shekhar,

  I hope that your day is going well.

  It turns out that it was the hard drive, it was defective. The new unit arrived and it works beautifully. Thank you very much for all you help. I wish you a happy new year.

  Craig.

• Windows 7 professional asks for a password when I never put one in place, so I can't get past the login screen.

  I have Windows 7 Professional installed on our desktop computer.  I've never set up a user account password when I installed last month, while I wouldn't not to remember it when I log in to Windows.  Last night, I rebooted the computer, but now Windows stops on the user account login screen and asks for a password.  He has never done this before, and I've never set up a password, so I have no idea what to do?  I can't get past this screen without a password.  I have very important files, I already put on this computer, and I need to be able to access quickly.  I don't have a password reset disk, as I've never set up a password first.  Why is this happen, and how can I'm get past this so I can access my files on my computer?  Please help in any way, you can, as soon as possible, please.  Thank you!

  Hi Marco,.

  You may need to contact a local technician to back up your data and then ask them to follow the steps on how to back up your files and restore your computer through this link: back up and restore your PC.

  In this way, you won't lose important any file from your computer.

  Let us know if you have any further questions.

  Kind regards.

• Try to upgrade to Windows 7 Home Premium and can't get past the blue screen upgrade now

  Try to run the upgrade to WIndows 7 home premium to clean virus problems. have tried for days, unable to get past the blue screen upgrade now.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• I can't log on to windows xp after that I erased the validation process. I get messages contradictory screens saying that I need to activate windows, then windows is already activated. Help, please

  I'm trying to get past the log on screen in Win XP.  I activated my copy of XP, but when I try to go into windows, it comes back with a message "you must activate Windows first.  When I try to activate (again), it returns a message "Windows is already activated.)

  Anyone know what is happening?
  Thank you
  Tom

  Hello TomRothweiler

  The steps also included Charles method 1: Guided Help to remove the script that interferes with Windows activation. 
  "The requirements to install and to use this guided help.

  • You must be logged to Windows using an administrator account to install and to use this guided help.
  • You must run Windows Server 2003, Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC to install and to use this guided help. »
  The requirements for this stage, it seems you don't need the disk but only download Guided Help and automatically executes the steps for you:
  Method 1: Guided help to remove the script that interferes with Windows activation

  Guided Help is available to remove the script that interferes with Windows activation. Guided Help can automatically perform the steps for you. The actions that this Guided Help performs cannot Ωtre annulΘe after that Guided Help is finished. For more information about guided help, click on the number below to view the article in the Microsoft Knowledge Base: 915092 description of Guided Help for Microsoft Knowledge Base article

  You don't need to refer to the Charles link, I posted the download for you. Click on it to run it and let us know if it helps. Thank you.

  Download Guided Help

• Unable to format the memory card, I get the message "windows could not format.

  Original title: car micro sd problem
  
  Hello
  my laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.
  to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.
  PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.

  Hello

  You are able to use any other memory card with no problems on the same computer?

  Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.

• When I download CS5.5, I get an error message telling me one of the files has not been downloaded correctly, but there?

  I downloaded CS5.5 three times and every time I chose the set.up.exe file I get a message that there is an error in the download and a file has not been downloaded correctly, but everything has been downloaded and just went through.

  I thought about it thank you.

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• Could not load the PES 11 on computer refurbished (Win-7) - get message "the installation process has encountered an error during the installation of the shared technolgies. If please restart your system and try again. "- After the restart still the same

  PSE - 11 on computer given to nine (w-7) Impossible to load her get message "the installation process has encountered an error so that during the installation of the shared technologies. Please restart your system and try again".  Done it several times and still the same message. How to install correctly?

  Thanks in advance.

  http://forums.Adobe.com/message/5982666#5982666

• Videos in my card sd will not be imported correctly

  Hello, I tried to import videos from my sd card on my laptop and some of them will not be imported correctly. When I say it will not be imported correctly I average it says it imported, but when I click on the video screen is black and you can hear the sound in the video. Most of them imported fine but four have not up to now why is this and how to fix this? If anyone knows please tell me thanks!

  camera: sony alpha a5000

  I can view fine on the camera.

  My camera will not record anything without the sd card if it also helps.

  SD card: perfomance elite pny 16 GB

  Laptop: toshiba which has windows 8

  Sorry I don't know the model

  Dayana Hello,

   

  Thanks for posting in the Microsoft Community. I understand that you are unable to play the videos that you have imported from an SD card.

  To help you better, please answer a few questions.
  1. what player you use to play the file?
  2. What is the file format of the video files which you can't play?
  3 have you tried to play with different media player?
   

  If you use Windows Media Player, you can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992/en-us

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player can not read the
  file.
   
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8
   
  If the file format is supported, you can try the following and see if it helps.
  Method 1:
  Run the troubleshooting in the Windows Media Player library.
  (a) press Windows + C set, click Search, and then click settings and then in the search box, type Troubleshooting.
  (b) click on programs.
  (c) then run convenience store to Windows media player library.
  
  Method 2:
  1. in order to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties.
  On the file tab, look at the sections of video codec and Audio codec.
  2 download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download Codecs player
  3. configure the protocol settings on the Tools menu, click Options, and then click the network tab. In the Streaming protocols area, select all the check boxes Protocol. When connecting to a server running Windows Media Services, Windows Media Player tries to use all selected protocols.
   
  Hope the helps of information. Let us know if you need help with Windows related issues.
   
  Thank you.

• Turning on my computer I get a blue screen saying 'Checking file system on C:.

  Original title: can not enter Windows

  Turning on my computer I get a blue screen saying "checking file system on C: the type of file system is NTFS.  The volume is dirty.  CHKDSK checks the files (step 1 of 3)»  It freezes ever complete the check, and I have to manually turn off the computer.  I can't get into Windows and also get this message in SafeMode.  Thank you.

  Hello

  We can refer to the following article and first try Method 3 and check if that helps.

  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  If you're able to boot in SafeMode woth command prompt, then you also, try Method 2 of the above article.

• COMPUTER DOES NOT RECOGNIZE THE MEMORY CARD

  WHEN I INSERT THE MEMORY CARD INTO THE COMPUTER NOTHING NOT SE PAST AND IT DOES NOT APPEAR IN MY COMPUTER SO I NEED TO KNOW IF ITS A SETTING OR A DRIVER OR IF ITS THE SLOT IN HIS CAR?

  WHEN I INSERT THE MEMORY CARD INTO THE COMPUTER NOTHING NOT SE PAST AND IT DOES NOT APPEAR IN MY COMPUTER SO I NEED TO KNOW IF ITS A SETTING OR A DRIVER OR IF ITS THE SLOT IN HIS CAR?

  ============================
  This card worked previously on this system?

  Certainly could be hardware related... other
  cards work on your system? This card works
  on other systems?

  Perhaps the card is not compatible with your system.
  For example, it can be a SDHC memory card.

  Perhaps the following links will enlighten us:

  Availability of the Windows Vista Secure Digital (SD) Rollup package
  http://support.Microsoft.com/kb/936825

  SDHC (Secure Digital High Capacity) memory card FAQ
  http://www.supermediastore.com/SDHC-memory-card-secure-digital-high-capacity-FAQ.html

  Good luck. John Inzer - MS - MVP - digital media experience

• OJ6480 am not able to import photos from the memory card inserted in the printer to laptop?

  I can't import pictures from my memory inserted in my OJ6480 card.  I am connected with USB and nothing appears automatically after you insert card.  Also, I used the menu photo option and he doesn't want me to import.  Help, please!  Thank you.

  Hi cafahr,

  I understand you are trying to print photos from a memory card.

  I find the user manual for Officejet 6480 and found the following.

  After taking pictures with your digital camera, you can print them immediately or save them on your computer. To save the pictures on your computer, remove the memory card from your digital camera and insert it into the slot for card memory on the device.

  To save your photos

  NOTE: Use these instructions only when you use a network connection. If you are using a USB connection, then a dialog box appears automatically on the computer when you insert the memory card into the device.

  1. Insert a memory card into the suitable location on the device.
  2. press on the picture Menu.
  3. press the arrow keys and select Photo transfer and then press OK.
  4. press the arrow keys, and then select Yes.
  5. press the arrow keys and select transfer to computer, and then select the name
  of your computer.
  6 follow the prompts on the screen on your computer to save the photos to your
  computer.

  From what you described, the question is simple, the dialog box does not appear on the computer. What happens if you start it > computer or workstation? Do you see something here that looks like it could be the card into the printer?

  Try to leave the printer and unplug the power cable (with the inserted memory card), leave the printer unplugged for about a minute and then plug it back. I want to see if this will push the communication to the computer.

  Have you used this memory card in the printer before successfully? I ask because the problem may be the memory card or the memory card reader in the printer. Take a look at this link, memory card troubleshooting.

  I hope it's useful. If the problem persists, please return with answers to the questions I asked, I'll gladly do some additional research and return with possible solutions. Please also let me know if you use a Mac or a WIndows OS.