Sony a7 has live food? and denominator screen turn turns off?

Similar Questions

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• My screen saver turns off and the screen turns off after 2 minutes or more. How to set time, the screen saver comes on?

  ? is explicit

  Maybe in the standby power options, after a period of inactivity. (Windows) Start > settings > Control Panel > power, the "Turn Off monitor" value Options a certain amount of time or 'never '.

  Other issues requiring your attention

  The information provided with your question indicates you have outdated plugins with known security and stability issues that need to be updated. To see the plugins submitted with your question, click on "+ system details...". "to the right of your original message of the question.

  • Adobe PDF plugin for Firefox and Netscape
    • New Adobe Reader X (version 10) with protected Mode just came out 2010-11-19
    • See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
  • Shockwave Flash 10.1 r53
  • Next-generation Java plug-in 1.6.0_17 for Mozilla browsers
  1. Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
  • Open the Adobe Reader program in your list of programs
  • Click Help > check for updates
  • Follow the instructions to update
  • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
• Download the full installer (If you have NOT installed Adobe Reader):
  • "Use the links below in order to avoid the painful' getplus" Adobe Download Manager and other 'extras' you do not want
  • Use Firefox to download and SAVE the installer to your hard drive for the appropriate link below
  • Click "save to file"; Save to your desktop (so you can find it)
  • Once the download is complete, close Firefox
  • Click on the installation program, you just downloaded and allow installation to continue
    • Note: Vista and Win7 users need to right click on the installer and choose "Run as Administrator"
  • Download link: ftp://ftp.adobe.com/pub/adobe/reader/
    • Choose your operating system
    • Choose the latest version of # .x (example 9.x for version 9)
    • Choose the version the most recent number
      • NOTE: 10.x is the new Adobe Reader X (Windows and Mac only from this announcement)
    • Choose your language
    • Download the file
    • Windows: click on the .exe file. Mac: click on the .dmg file
• Using one of the links below will force you to install the "getPlus" Adobe Download Manager
. Also don't forget to uncheck the McAfee scanner if you do not want the link force installed on your desktop computer
• See also the download link': http://get.adobe.com/reader/otherversions/
• See also: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for download, you can get the painful 'getplus' Manager to download from Adobe (Adobe DLM) and other "extras")
• After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers. Note the separate links for:
    • Plugin for Firefox and most other browsers
    • ActiveX for IE
• Update the Java plugin to the latest version.
  • Download site: http://java.sun.com/javase/downloads/index.jsp (Java platform: download JRE)
  • See also "manual update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
  • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
  • Remove several extensions of Console Java (if required): http://kb.mozillazine.org
  • Java test: http://www.java.com/en/download/help/testvm.xml

• I'll randomly hear the sound "budunk" as I am connect or disconnect a device, and the screen turns off for a second. Why is this happening?

  I am running Vista Home Premium 32 bit and I use my LCD TV as a monitor, connected via RGB connection.

  If I happen to watch a video in full screen, it will kick of the full screen mode and sometimes, but not always, a window will open on Microsoft Silverlight.  I've updated to the latest version of Silverlight yesterday, and now when I go full screen, audio and video do not always match.

  In fact, the problem has been resolved.  The problem was that I had chose the tv as my monitor, but that he had unconsciously chosen to extend the desktop on the monitor to the laptop, so that the two pilots of the monitor were not cooperating for some reason any.  When I chose to just disable the monitor laptop in settings, since I was not using it at all, the problem is completely resolved itself, and now there is only an entry for a monitor in Device Manager.  The sound was done when I opened up the laptop monitor tried to kick, as if I'd opened the cover, which I think has not been closed firmly, so he thinks randomly there.

• How to rotate your screen 90 degrees computer, my computer crashed and the screen turns off 90 degrees

  my computer screen is rotated 90 degrees, how do I turn right?  Help

  CTRL + PERIOD (.) Rotate the image to the right

  CTRL + COMMA (,) rotate the image counterclockwise

  The ability to rotate the screen image is a feature of your video card, to help work with instructors who rotate the portrait orientation. Almost certainly you accidentally pressed Ctrl-Alt and an arrow.

  Rotate using these keys.

  UTC/GMT is 16:38 on Monday, January 9, 2012

• Bluetooth freezes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

  Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Pre Bluetooth crashes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection.

  I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good.

  It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State.

  I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not. Again, it is like turning off the screen causes the bluetooth of the phone hang.

  Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Screen turns off when the Satellite A45-S250 is moved in the direction of less

  Hello.

  I have a satellite A45-S250. I had no previous problem with this machine. However, when the computer is running too long, or it is moved in the slightest way the screen turns off. I don't even have to type very slowly - or I lose the screen.

  But also, as I have said - sometimes I won't even be near the computer and the screen turns off. When I lose the screen if the light shines on it - I can see, it's always VERY fair Sun. Generally, it will come if I use the FN + F5 button.

  I don't know if it is a screen problem or a connection problem. It occurs with increased frequency. Any suggestion would be appreciated.

  Thank you

  Mindylea1

  Hello

  From your description, I assume FL converter is defective and must be replaced. FL inverter is responsible for the background light and the typical symptom for faulty FL inverter is dimming or blinking display.

• Re: NB200 - making noise and the screen turns white

  Hello

  My laptop makes the high pitched noise and the screen turns white. Please help with this question.

  Thank you

  Hello

  It is especially as this problem with the inverter. She is, die, and made a noise of pitch. Try to connect the external monitor and check if it is displayed.

  Welcome them

• T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

  You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

  Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

  Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

  So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

  Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

  If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

  See this KB for more information

  http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Expansion of the files is at 27% and then my screen turns off? : s

  Hi all, I read the other thread on this subject on the website, but as usual the problem I have is simply a little more boring, I would like to re-Morphix vista compeltely but in order to do so I obviously need to go through this process. As the title says, when he reached 27% on the expansion of the files after the first reboot, it goes no further, then after awhile my screen turns off. IM typing this text from my laptop at the moment in the hope that all of a sudden my screen will restart and it will continue, but I doubt it very much.

  I understand more information may be needed to help me then please just ask. Thank you.

  P.s. This problem during one accurs installation from the cd rather than boot. When I try to boot from the drive and runing installing it, my screen turns off agan normally just after entering the cdkey for vista.

  I have no idea why this is happening, but if I have the sort I would be very very happy :)

  EDIT: A little later and the screen is back on, sound saying "Please wait a moment while windows prepares to start for the first time" then after that, there are a lot of points and moe points keep coming (etc.) I hope it's a good thing: S

  Hello

  1. are you able to boot to the desktop now?
  2 How much RAM you have in your computer?

  If you are unable to boot to the desktop, then unplug all external devices and try to install windows again.

  If the installation fails again, then start in the system recovery options, and run the Windows memory diagnostic tool.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Two problems that seem to be related. The screen turns off suddenly and reappears when the mouse is clicked. At the same time, the cursor insertion point disappears.

  The cursor disappears during the strike. It is blackened and cursor disappeared three times during the typing of this sentence. Very frustrating! I'm running Windows 7 Pro on a Dell Inspiron.

  Hi Ed,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 problems on your Windows 7 computer.

  1. The screen turns off when you click with the mouse.
  2. The cursor on the screen disappears while typing.

  Let me know if this interpretation is erroneous. To better understand the issue, let me ask a few questions.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?

  I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Start the computer in safe mode and check if the same problems occur. Safe mode allows only a minimum set of services to load, this will help us to know if a service is causing the problem.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  If the problem does not occur in safe mode, and then perform a clean boot, this will turn off non-Microsoft services and therefore to determine if any non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.

  Method 3:

  The question could have occurred because the drivers on your computers are not updated. See the link, follow the steps and update the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  View the status of the issue. If the problem persists then let know us, we will provide several methods.

• When I try to sign a document, the screen turns off and I do not see the document.

  When I try to sign a document, the screen turns off and I do not see the document.

  Hey jordic35730386,

  Please try to uninstall and reinstall Adobe Reader here:

  Adobe Acrobat Reader DC install for all versions

  Let me know how it goes.

  Kind regards

  Ana Maria

• Equium A200 - screen turns off

  Hi, I'm having a problem with my Toshiba laptop, the screen turns off randomly and the computer still seems to work, but when I use a VGA cable to connect to a TV it does not display anything.

  Here are pictures of when it fires
  http://Tinypic.com/r/vr9d7d/7 yellow on the disc tray is turned on
  http://Tinypic.com/r/2d9poya/7 that the front turned on lights and computer sounds like its operation.

  This led me to believe it's a hardware problem, but when I turn on the computer in Mode safe it never turns off. I also got the fixed ups this year because the screen was losing power.

  Can anyone help I can't really afford a new laptop at the moment

  Hi David,

  It's a little confusing, it doesn't always happen when you shut down the computer, or just sometimes?
  What do you do to get rid of this? Always remove the battery and the AC adapter or what exactly?

  I think that it s a hardware malfunction, usually has nothing to do with the software. What you can try is a BIOS update from the official website of Toshiba.