Sony album will save not received new images

Similar Questions

• Windows 7 Ultimate will save not receive the error code 0 x 80070002

  Original title: Windows 7 Ultimate will not backup

  I'm running Windows 7 Ultimate and the backup utility does more. I get a message that it does not back up - error code 0 x 80070002. What can solve this problem?

  Thank you very much.

  Hello NoFunBob,

  When you try to back up your data too? (external drive, dvd, IE..)  When your last successful backup has been completed?  Please let us know status.

  Thank you

• Why one of the many images will save not the same size?

  I'm very experienced PS user/commercial photographer, normally to do my job without any major problems. But I have lived just an anomaly weird to prepare images for my site and I wonder if anyone can understand what I have to be dominant?  After all changes to color/tone/compositing on each image, I have run through a series of droplets, which variously flatten, sharpening, size, change the color profiles and so on. These droplets self made save me a lot of time and effort and working perfectly for years. The end result for each image should be a jpeg in sRGB that matches the dimensions of the page of my site, with a size optimised for minimal degradation and quick loading. These images should weigh anywhere from 250 to 560 ko, and without exception, they always have. So far. Before going to the last drop (which will save in JPEG format at a certain level of quality), they are all flattened TIFF, all exactly the same pixel dimensions. The final JPEG images vary a bit in size, depending on the complexity of each image, but this one, simple images of winds up to 2,1 MB - more than 5 or 6 times the size of other images.  I went back and looked at this image at each stage of its development, and I can't see for the life of me what it differs from his comrades, or why it won't save to 400 KB or more.  There is no channel stored in the DSP, or anything else I can think of that I might have missed. Any ideas?

  The image is loaded on my site now, big as is.  You can see here in this new collection of images...

  Cruise 1_5 | Todd Pearson - Professional; Photographer

  Thank you

  Todd Pearson

  And we have also seen some cases here recently that came down to the metadata. I know, it seems unlikely, but apparently metadata can reach huge sizes in certain specific circumstances. So if you haven't already done so, try saving for the Web (with metadata set to 'none' or ' copyright/contact').

  Copy and paste into a new file deletes also all the metadata.

• Photo Gallery will save not videos

  I now have 10 Windows, but this problem started before 10 and continues.  When I receive a video of a phone it won't save in Photo Gallery.  I can save my camera, or an attachment sent to me of the camera to someone else, but not one made by an iPhone, for example.  I get it as an email, save to my desktop, and when I opened the Gallery of photos, he's there.  But if I delete it from my office, he went from Photo Gallery, too.  And I can't find an option to save in the photo gallery.

  Moreover, with the saved photos, it has no particular option.  He never stops of their... photos and videos.

  If I get a she will save, he got a slightly different screen, on which he plays.  I think that one of the options at the top of the screen is to save and organize.  Once I click that, it is in the photo gallery, and I never save it on the desktop.  But these videos to the iPhone does not open in this kind of screen.  And I can only save to the desktop.  Like I said, they appear in the photo gallery, but they are not saved in this folder.

  Sorry if this is not so easy to understand, I don't have much experience with the different ways to record photos and videos.  Thanks for any help.

  I had to say it was Windows 8 because otherwise it does not give me the opportunity to discuss the pictures and videos.  But as I said, this problem existed before and continues with 10.

  Hey George,

  On this issue, you must create a new user account and verify. If you work well transfer files.

  To create a new user account - http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8

  To fix the corrupted user profile or data transfer - http://windows.microsoft.com/en-us/windows/fix-corrupted-user-profile#1TC=windows-7

  Nice day

• Error 0x800ccc0f of Windows Mail. Could not receive new e-mail messages.

  original title: windows mail Error 0x800ccc0f

  Hello fantastic support network. Read these previous responses, but none of the work steps or apply here.

  It is a January 2009 HP Pavilion dv6-1030us notebook PC that is pre-installed with VISTA. I immediately

  client Windows Mail enabled & his works well on AT & T / yahoo mail Uverse. Microsoft Security Essentials is my protection.

  * November 30, 2011, receive POP3 abruptly stopped at ~ 15:00 but SMTP sending worked. With the help of the

  send-receive button gave the infamous 0x800ccc0f. Another IMAP account has always worked in the MAIL client.

  * The process of POP e-mail is reported in the normal status window: it's the same as always... connection.

  authorizing, receive the list messages BUT the thermometer progress bar passing ~1/2 THEN gets busy Vista circle

  appears when the cursor is in the window and the (not answer) appears in the top bar of the box, the grey-out box

  and after 30 seconds or an eternity, ERROR 0x800ccc0f and all its gory details appear in the ERROR tab

  * Web browser email AT & T has always worked well. If I was logged into that or not, the E-MAIL client still not receive.

  * Yes, I checked reentres changed settings / taken secure... as other suggested aid. What I used was correct.

  * Do not know how to really kill uSoft essential security of Virus dead... few have suggested these things can get in the way.

  But I can turn it off & see a message "WARNING do not set" "so I guess than her off, but the problem persists in both cases."

  * Later, I took a bunch of updates for Microsoft VISTA that I've been holding on & without change.

  * AT & T help pages wrote that the server names had been migrated from pop.att.yahoo.com to inbound.att.net

  (similar to smtp) so I changed those back & before but nothing has changed functionally.

  * Called people helping AT & T & they checked my e-mail & server was OK, like many, they might say.

  "" * In despiration I have set up a new MAIL account unsing the identical info and checked the box of "synchronize".

  (on the opening tab properties page) & unchecked that box on the original account. NOW, the send/receive

  Downloaded ALL my mail on the server since the dawn of time to the account, 20 000 + articles. About 4 hours

  later, I got an inbox stuffed to date. Thought, it has been fixed. The next send/receive button & ccc0f ol ' was back.

  The workaround is sending web mail to my IMAP but that gets old fast.

  * Please do not solve dodging & me migrating to a different E-MAIL client, unless you can prove that all my finicky files

  & This will be moved as if by magic.

  * Yes I made backups of Vista on an external hard drive... but the idea of a clean full ERASE & reinstall all

  to fix some broken uSoft code is disgusting.

  * I am ready to use reliable tools to repair if they are really clean. I can't find the armories of install any MAIL in this

  the machine then that under XP, settings, and programs offered remedial functions.

  The computer is a tool for my business & life, not a hobby or pastime or vocation.  I just wish it was broadcast as if it were.

  * If I appeal to you, the experts. Thanks in advance! RFjock 12/17:30 Chicago 10.2011

  Bruce asked jumping me in here, because I'm more familiar with Winmail and the database and I wrote WMUtil.  The reason why I wrote this is because there is no easy way to manually compact the database, and WMUtil simply encapsulates the MS utility to make it easier for users.

  Here are a few suggestions:

  If you have the WinMail gadget running, get rid of it.

  For MSE, go to settings and disable the eml file type analysis.  Which prevents the eml files scanned and deleted, resulting in a database inconsistency that corrupts the database (fixes WMUtil).  If you are unwary enough to open an attachment infecting, MSE will always be in the background to block.

  Your problem is caused by one of the two possible, from what I can discern.  The database in Winmail opener could have been damaged, you can run WMUtil (and let him finish.  If you are worried, then do a backup of things, if you do not already have (see www.oehelp.com/backup.aspx#wm)).  Then see if the e-mail problem accounts work.

  If you get the error, then the other question could apply, that is, there may be a problem message on the server that cannot handle Winmail and generates the error.  In this situation, you will need to identify the problem message and get rid of him.  Since you already have 2 copies of your 20,000 messages that you have in the POP3 Inbox, I suggest that you create a new folder of mail on the server and move messages from the Inbox to the server to it.   Then add another copy of the POP3 account in Winmail and see if it will download the most recent messages.  Who can get rid of the question then.

  See if any of this helps.

  Steve

• RH10 project will save not subject in Design view.

  I made a post a while ago where I solved her problems in a project where we could not save the topics in Design view.  Go to the view HTML before a topic will save.  In the past we have found that the problem has been altered and or virgins User Variables.  This project has only 1 variable now and when we went from RH9 to RH10, our problem is back.  No other issue does exist in this project... so far... we can be as a result of the upgrade RH10.

  Has anyone else had this problem and or have their solution?  We have other projects like this that have no problem at all.  This project was created about eight years ago and spread through many versions of HR where our other projects have been through upgrades 1 or 2.  Perhaps some old junk is ruin it?

  Thank you

  DV

  I understood why the subjects won't save in Design view but will save in HTML view.  When our project has updated the references to our global variable for 'Revision_Current-letter' were broken.  I went to each master page (14 in all) and remove the variable global in the foot and replaced with the same variable but just a fresh itteration.  Then generated a report properties topic and find 3 subjects who had this false variable link.  I replaced these links with a new one and suddenly I could still save files in Design view.

  So very strange why Design discover blocked me to record subjects as a global variable was damaged.  When I double click on the wrong variable, he came empty.  I know that it is a problem of having empty variables in the past.  I guess the people of Adobe haven't fixed this problem of having a variable with no value!

  Hope this helps someone else.

  One other point, my project still does not compile HTML Help.  It helps on the Web, but not HTML Help.  I think I have a lead, but I'm going to open a new discussion for that because it's got a strange problem double path.

  DV

• F4140 HP all-in-one will save not scanned

  I wonder if someone can help me with my scanner.  My OS is Windows 7.  It's an HP f4140 all-in-one, connected to my laptop Aspire 5251.  The last time I used the scaqnner somewhat successfully, it wouldn't let me save a document of any kind except as an image.  Now, it won't save to the computer.  I did all the help files told me to do, but not luck.  Then I uninstalled and reinstalled, again without success.  I followed all of the suggestions, especially the one that was supposed to solve this problem, again without success.  I do not understand what message about what is wrong with it.  I don't give me the option to save at all.

  I finally have it. I got in trouble because she was in the wrong place. Thanks for your help.

• Does not receive new emails from thunderbird to my gmail account not

  Hello
  Since 4 February I get new emails in my thunderbird (version 31.4.0) to my gmail account. I can send emails, however.
  I have 2 other e-mail accounts and that they do not have the same problem. If I have access to my account gmail since the browser or my phone, I can see the most recent messages without problem. I have reviewed the configuration settings (IMAP) and they seem correct, incoming and outgoing.
  I already followed all the advice I could find online (removed McAfee, corrected some configurations recommended by gmail, etc.), but nothing helped. I would be grateful for any help.
  Thank you very much

  Your phone uses POP to retrieve messages?

• iPhoto will show not all the images in 2016

  Since the beginning of the year, all the images that I imported into iPhoto just disappear. They are there in the depths of the file system, but iPhoto refuses to show them. It shows the last import correctly, but as soon as I import something else, these images disappear iPhoto. "In the last 12 months' shows photos for 2015, up to the last import 29/12. "All photos" also stops at 12 29, 2015.

  I had to repair and rebuild on the database - it doesn't matter. I also searched the web but found nothing relevant.

  Most likely - the date on your camera is set to false

  Right-click on either in the last import and select Show in times where it is - without doubt, you will immediately see the problem and the most likely cause is your date setting camera

  LN

• When I send mails in Hotmail with attachments photo the recipient does not receive the image.

  original title: Hotmail

  When I transfer emails containing photos, sometimes the pictures don't pass by the recipient.  Just this box with the red x in the upper right corner, which also sometimes when I open a received email from someone else.

  Hello

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/

• Zoom slider will save not open by default in the streets and travel 2013

  I can slide down from the search box in the map where the slide is displayed again, and then drag it upward making a full toolbar advanced.  When I save it full aperture zoom slider disappears when I opened a new card.  I changed all the default settings and think that I created a bug at the opening of the card once in the past.

  I don't want to take the risk of S & T uninstallation and reinstallation when he could now work at all the.

  Hi Nicolas,.

  Microsoft Streets & Trips has been abandoned.  You can get help from Microsoft Streets & Trips here.

  Thank you

  Stephanie Podder

• Bing Dynamic theme work, but do not download new images of food

  I use Bing dynamic desktop theme on my Windows 7 PC.  I love the theme and images.  However, I had planned new photos to add to the slide show over time as new photos have been posted to the RSS feed.  My RSS in Outlook reader shows me that several new pictures have been published, but I don't see the pictures in my desktop theme.  What should I do to get these new pictures to download and see in my desktop theme?

  I use Bing dynamic desktop theme on my Windows 7 PC.  I love the theme and images.  However, I had planned new photos to add to the slide show over time as new photos have been posted to the RSS feed.  My RSS in Outlook reader shows me that several new pictures have been published, but I don't see the pictures in my desktop theme.  What should I do to get these new pictures to download and see in my desktop theme?

  Hi isomz

  Our colleague Ramesh Srinivasan MVP has released a fix for this problem today. Here is the link.

  Difficulty Bing dynamic Theme stops functioning after deletion of the temporary Internet files in IE

  Let us know how it works for you.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Acrobat XI will save not filled with information. Help Obi One Kanobi, you're our only hope

  I have Acrobat Pro XI. I'm filling a 19 page request, but when I save the application and open up thereafter, all fields are empty. I tried several different save as types, but all without success. Any ideas?

  Can I convert the form or save it in a different form to keep the information entered?

  Thank you in advance for any advice you can offer.

  The chances are that the form is designed to erase when you open it. It records, but wiper and then click Open. Bad design, but some designers of forms for this, with exaggerated concerns to pick up a form previously filled in.

  Disabling JavaScript in Acrobat preferences CAN stop it.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• I have a version of Adobe Photoshop 2.0. If I download a new version, it will save all my tags? I have over 10,000 images that are tagged.

  I have a version of Adobe Photoshop 2.0. If I download a new version, it will save all my tags? I have over 10,000 images that are tagged.

  This will depend on how the tags were saved. If you see the tags in your browser (windows Explorer or mac finder) files, then you should be fine.

  If this version of photoshop is located on your computer and works fine, I want to leave until you know how the tags behave when you upgrade. There is nothing that says that you need to uninstall an earlier version. Or at least until you think necessary.