Sony Vaio hangs when put on sleep and then I get "the Navy PC has a problem and needed to restart.

Similar Questions

• While trying to close Windows Live Mail, I get the error message "there are messages in your Outbox - would you send? When I click on Yes, then I get the 0x8CCC0003 error message.

  Original title: Windows Live Mail error

  I use Windows Live Mail and have never experienced a problem. Tonight I was e.mailing good people - just normal text.

  Then, because I forgot to add images, I tried to send an e-mail to the same person and added about nine pictures not as an attachment, but the actual part where I'm typing the message. I've NEVER had this problem before, but now I still see the message in my Outbox but I am unable to send it.  When I click on my e.mail and close all the windows that are ready to shut down the PC, I get the message windows "there are messages in your Outbox - would you send? When I click on Yes, then I get the 0x8CCC0003 error message.  No idea WHY this could be happening all of a sudden unannounced.. ??

  Any help would be appreciated to greately thank you!

  It is likely that the message in the Outbox is damaged.  Too bad.  You will need to remove it.

  Next time when you send email and want to ATTACH photos, do not use the WLM feature for the photos, but the paper clip icon to ATTACH photos.  This email will be visible to the receiving end with attachments that can easily be saved.

  Also, check with your email provider to see if there are limits on the size of an email.  You can be greater than a limit.

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I bought Adobe flash on a disk and installed on my previous Sony Vaio. I have a new mac and adobe software is still on my old Sony Vaio, so I was wondering if I could somehow transfer the program to my new Mac?

  I bought Adobe flash on a disk and installed on my previous Sony Vaio. I have a new mac and adobe software is still on my old Sony Vaio, so I was wondering if I could somehow transfer the program to my new Mac?

  Please follow the steps below.

  1. Disable the software from the old computer. For more information consult Learn how to enable or disable Adobe apps.
  2. Install the software in the new computer.
  • If it is creative cloud consult, download and install Adobe Creative Cloud applications
  • If it's any other product please see other downloads

  Hope this will help you.

  Kind regards

  Hervé Khare

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

  original title: problem with shdocvw.dll

  Hey guys just a quick question.

  bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

  a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

  Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

  It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

  see you soon

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link below to ask your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• Try to install microsoft software titles and when run download or download registered site get the pop-up 'needs elevation' does that mean?

  "a need to rise"?

  Try to install microsoft software titles and when run download or download registered site get the pop-up 'needs elevation' does that mean?

  Hello

  Right-click on the setup.exe and run as administrator

• Installed WriteItNow 3 software and now when I try to uninstall it, I get the error message: error in LaunchAnywhere.

  I installed the software WriteItNow 3 and now when I try to uninstall it, I get the error message: error in LaunchAnywhere. Cannot launch the executable file. Class not found: com, zerog, lax, LAX. How can I fix this so that I can uninstall the software?

  original title: error LaunchAnywhere

  You can give a whirl to this program because it is good enough to get rid of stubborn programs.

  http://www.revouninstaller.com/

  I hope this helps.

• When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.

  I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal.  I downloaded the fix for quad core to use virtual pc and windows xp mode.  When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.  I service request # 1182160056 but the phone lines of microsoft do not work.  Any suggestions?

  Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.

  Click Start, type: enable or disable windows features

  Press enter on your keyboard

  Scroll down and make sure that Windows Virtual PC is checked.

  Click OK

  Restart if prompted.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can't find no other open programs and have tried several times to restart and power d

  When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can find no other open programs and have tried several times to reboot and turn off without success, any thoughts where I should look?

  Cannot open catalog in Lightroom

• "Sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you. "windows 8

  Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.

  The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.

  The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
  After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
  This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)

  All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!

  My specs are:
  Avatar
  CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
  GPU: Geforce GT 640

  16.0 GB
  operating system 64-bit, x 64 processor
  Windows 8.1

  Hi Kaelie,

  This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.

  Just reply to us if you are having problems with Windows in the future. We will be happy to help you.

• "Receive the error message" your PC has encountered a problem and needs to restart.

  Original title: stuck in a reboot loop, can't connect.

  Today, my laptop (VAIO, Windows 8) restarted while I was there and since then has been very slow to start. During loading, I get messages such as 'Your PC came across a problem and must restart' and then 'preparation auto repair' again and again.

  I have tried rebooting several times and sometimes I'll get to the login screen, but when I log into my account (which is the only one available) it says "could not load user profile. Right now, I restarted and did not get to the login screen. It says "repair disk errors. This can take more than an hour to finish."

  Windows 8 is the operating system that is installed with the system. I tried to boot into safe mode several times (SHIFT and F8 at startup), but instead to get a menu of options the computer says "Your PC encountered a problem and needs to restart" and starts all over again.

  Hi Geo,

  What is the model number of the Sony VAIO laptop?

  This problem could be due to corruption of the system files, I suggest you try to perform auto repair using Windows 8 disc of Windows recovery environment (WinRE) and check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  a. insert the media (USB or DVD) and restart your computer.

  b. press the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once that the Windows Setup window appears, follow these steps:

  d. click Next , and then select fix your computer.

  e. you will then see a blue screen and an option to choose. Choose the Troubleshooting option and select Advanced options.

  f. you can choose automatic repair of the advanced boot option.

  Keep us updated on the status of the issue.

• Satellite C660 - 1 M 0 encountered a problem and needs to restart

  Hello
  Today, when I turned on my laptop before it starts, I get a blue screen says:
  Your computer has encountered a problem and needs to restart. Collection of information.

  What is this problem for?
  My laptop is TOSHIBA Satellite C660 - 1 M 0 i3

  Is this a Windows problem?

  Here is a message I received in Windows7forums on this subject but I don't understand what he means, can understand you for me please? e

  * Re: Heeelp! Your computer ran into a problem! *

  These screens generally include a sentence in the screen "fallen on problems." Usually something like Violation of Watchdog DPC (Deferred procedural call) and are often associated with a bad driver and or a power saving state not supported (sleep, hybrid sleep, hibernate, etc.,)

  First of all, make sure that you have the latest drivers from your computer manufacturer and or the individual device manufacturer's Web site. Then consider whether this computer manufacturer includes any software that may be incompatible with Windows 8 CP or is somehow patented conflict with Windows 8 CP in energy saving power scheme options. You may need to experiment a little, maybe remove the proprietary tools or taste affecting your schema of high performance or even the options down or max.

  The overview of consumption is more or less a new frontier for everyone here to work through this kind of problem is going to be informative and beneficial for all who read your thread, so please keep us posted as to how you are progressing with your current number.

  Concerning
  Randy

  Hello

  Blue screen of death (BSOD) may be caused by software or hardware problems.
  To know if it of really a software problem, you can try running a HARD drive recovery procedure which would fix the laptop back to factory settings.

  What is an option for you?
  If Yes, check this:
  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• When I try to use VAIOcare I get this massage "VAIOshell has stopped working.

  When I try to use VAIOcare I get the following message, "VAIOshell has stopped working. A problem caused the blocking of the program works correctly. "I tried to download it with no luck? Help!

  Hi Frankhile!  Have you tried to re install your VAIO care and updating? Please provide us with the name of your VAIO model so that we can direct you to the support page. Thank you.