Problem in setting DateTimePicker

Similar Questions

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  Hi kikikilala,

  Please explain the problem you are oriented connect Gmail with Lightroom

  Try reauthorizing your Gmail account once in Lightroom and see if that helps.

  Refer to Validation of Gmail failure

  Kind regards

  Assani

• Very grainy Youcam problem after "setting fix advanced dark screen" in dv7

  Hello.

  I have the YouCam came with my computer, which is a HP Pavilion dv7 Notebook PC with Windows 7 Home Premium, Service Pack 1.  Since I got it, I installed all the updates.

  I was JUST able to solve the problem of black screen that many people seem to have by changing my setting with the following fix:

  Go to "improve the current video image"

  Click on "Advanced".

  The value of 'Backlight comp' to '2' (which is max) in the "Video Proc Amp" tab

  Go to the tab "Camera control" and set "Exposure" to "-2" (which is max)

  Click Ok.  Do not hit 'apply '. It will cancel all these settings)<---Most frustrating="" thing="">

  So now, I have a picture.

  The problem that I have now, it is the image I horribly gal AND has a grainy grid pattern on everything.  Other videos of the correction, that didn't happen.

  Sample photo:

  

  Video example (YouTube):

  http://www.YouTube.com/watch?v=aNqMxaiIam0&feature=youtu.be

  BEFORE that, I was able to capture video/images that were fairly normal; No big, but normal HD.

  I want the HD-ness, I should be out a HD product I bought... :/

  HALP!  Thank you in advanced for your magnificence in advance.

  PS: I tried to 'default' everything, too. I had to do the fix to make it work well. I don't know what kind of parameters I maybe changed or not when I was trying to understand the original problem, or if there is a setting I have unintentionally has no 'by default' because I forgot...

  Hello Spennati,

  Try the steps in this link http://goo.gl/Zl7Jx

  Please let me know if it helps.

• FiOS router m1424wr wireless broadband, having problems to set up

  I just got a used frontier fios model # m1424 wr wireless router.i broadband went to set up after download manual and everything was happening along gently until I tried my roku wireless to the router in place hang, I kept getting errors that my coaxial cable is not connected or broken , I said fine and went ahead and plugged an Ethernet cable for the router.again I got error this coaxial cable not was not connected.i was informed by the operating instructions I should or the other of these connectors plug into the socket that the telephone company had provided in the wall.i can not get my Ethernet wan or coax wan light to come on the download speed of 1 router.i GET g but unable to connect to him because the internet only I get is through a wireless adapter not the wall.i go to 192.168.1.1 it says router status STOP check your connection.it broadband also said I have 3 items connected by Ethernet (2 are active) and 4 by wireless, none of whom was followed active.i instructions very carefully and I can not understand.my first it is You can get anything from the coaxial connection and Ethernet, the phone company installed in everybodys Home.la 2nd question is how can I connect my roku to router when I can't get hooked using Ethernet or coaxial.need

  Hi James,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you are facing problem to implement a router broadband wireless. I suggest you to return the article mentioned below and see if it helps you to configure the router.

  Set up a wireless router

  Yes, if the router has the available slot so we can connect our computer to the router with Ethernet cable. If you are unable to connect Roku with Ethernet cable, I suggest you to contact your service provider and see what they suggest.

  Keep us.

  Kind regards

• Problem with setting icon of FDTS IDE

  Hello

  I was using Adobe Flash Builder IDE to create applications for Tablet Blackberry using Adobe AIR. Currently, I had spent in FDTS IDE based on the details that are on the bb site (). I tried to create apps for the two BB tablet as well regarding BB 10. I followed the same path that we follow in Adobe Flash Builder. But when running the unit or the Simulator, he demonstrated error 'unknown resource '. But the same folder structure, classes, images work properly in Flash Builder.

  Please someone help me solve this problem.

  Thanks in advance

  Vineeth K

  Hello

  I had found the solution for this.

  It was since then, seven windows laptop is to have two Admin & Normal user accounts. The Normal user, I used the IDE FDTS, for security reasons. And FDTS IDE, AIR SDK, Flex SDK, and BB 10 SDK were inside C:\Program Files (x 86) \Research In Motion\. It was the question. I had found that for many software blackberry and related drivers are required to be installed directly on the C drive for better use. I had tried that and found that the setting icon errors are resolved.

  Note: Do not related Blackberry software install in Program Files / Program Files (x 86) in Windows. It can be in any folder inside C (the drive in which Windows is installed), example, C:\Blackberry.

  And now FDTS turns out to be almost fine.

  Thank you & best regards

  Vineeth K.

• Smartphones blackBerry with calendar questions probably a problem of setting

  Howdy all! I just changed a curve (which I really liked) to a "BOLD" (which I love!) I think I have a handle on most of the small difference, but have a problem with the screen of the MCH that makes me crazy! I can't seem to view the following two pending appointments under the "calendar" icon (of course it does not show the first two messages email either, but I can live with that). I tried a couple of different themes that display these options in their view example (most recently the Blackberry Storm today than themes4bb.com) but still no appointment until I actually open the calendar application. I think that it is in a setting somewhere, but I just feel like a "retarded" because I can not find it. Anyone out there have any ideas? I would really appreciate the help.

  Check out this article to see if it can help

  http://www.BlackBerry.com/BTSC/KB14646

• Problem to set up the adhoc network

  I m having problem in the implementation of ad hoc network, after you have entered the network name, type nd security key it says "windows cannot Setup adhoc.

  Please any one help me to solve this problem

  Hi Tipus,

  An ad hoc network is a temporary connection between computers and devices used for a specific purpose, such as sharing documents during a meeting or playing multiplayer games. I suggest you try all the steps from the following link for the ad hoc network configuration.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can I fix my Windows 7 file association problem and set the default values for the correct file?

  Files do not open the appropriate program

  The simplest is to restore your system settings for a time before the invalid associations have been set.

  1 type the word restore in your Start menu, then choose restore system files and settings...
  2 - Click Next, choose a date before the problem happens again, and then click Next
  3. about 2 minutes later, you're all set.

• Problem of setting a value for the hidden item click on the button with processes action or pl/sql dynamic

  Apex 4.1

  Oracle 11g

  I have a page which consists of a main and several sub-regions area.  I have a pl/sql process in after the header SET_DISPLAY(:P400_DISPLAY:='MAIN';))

  Three subregions have a contional show where P400_DISPLAY = STORE.  It works in the hiding of the sub regions.

  Now, I want to change the value P400_DISPLAY to the STORE to show the subregions when I hit a button.

  I tried to create a dynamic action for the click on the Add button, but get the following error:

  The selected button uses a model of 'button' that does not contain the #BUTTON_ID substitution string #.

  I went to the models and found:

  Substitution strings

  Substitution strings are used in sub models to reference the value of the components. This report details use of string substitution for this model.

  Substitution string	Referenced	De	Description
  #LINK #.	Yes	Model	To be used in an attribute "href".
  #JAVASCRIPT #.	NO.		To be used in an "onclick" attribute
  #LABEL #.	Yes	Model	Button label
  #BUTTON_ATTRIBUTES #.	NO.		The attributes button
  #BUTTON_ID #.	NO.		ID generated button will be ID either the static button if defined, or if not will be a generated ID internally in the format 'B ' | [Internal ID of the button.

  I then tried to create a page process, pl/sql,: P400_DISPLAY: = 'STORE '; If the button is pressed.  The action of the button is submit page. However, it does not change the value of P400_DISPLAY and the subregions are hidden.

  Suggestions please on how to fix the template or change the value of P400_DISPLAY?

  The question of the root, it's that, even if you change the value of the element of your page, it is not visible to other areas of the page until it is in the session. Thus, any other action based on the value of the element of your page. the visibility of a control, a report based on the value of the item, etc. will be affected by changing the value of the item page until it has been changed in the session. Even after that, items are stored in the session, then you must do something to influence the revalued value. To see the effect of this, observe that your page will load and assesses the value of the element of your page, it sees which is the "MAIN" and mask areas. However, he didn't reassess after that.

  Then; your choices for this value set at the session are send the page, or use JavaScript to set the value in the session. If you use the latter, you will have to do extra work to make visibility tests be re - run, so, let's stick with the submit method.

  What you did above sounds correct to do this but, there are a lot of decisions, that you might have done that may have caused things to do not occur in the correct order.

  First of all, we will confirm that what I describe above is your problem. From the development environment, load the page, click on the button to change the value and submit. Now, click on the link marked the Session. He is always at HAND? If the answer is "Yes"; That's your problem.

  Let's start with your calculation after the header. You set it to * only * run if the current value of the element of your page is null? If this isn't the case, it's your problem.

  Load the Page-> Item set to 'Hand' by calculation-> click on the button--> Item set to STORE-> Submit-> Page Load-> point by calculating the value 'hand '.

  See the problem?

  Assuming that's not the question, you have created a branch to the same page, right? What is your process for the branch point? Is it * after * Validation, computation etc.? Because if not, you are not changing the value before that didn't get to submit.

  I bet that's the first question, but take a look at these.

  See you soon,.

  -Joe

• Conditional text in Table - problems with setting the line height

  Hey there,

  I'm German, but I try to express my problem in English as I can. Not always easy with different menu names. Hope you get what I mean! :-)

  As you can see in my attached screenshot, I placed the text in a table.

  Text height is set: minimum 1.5... so it adapts to the amount of text.

  That's what I want - it should adjust the height of the conditional text marked/s.

  It always adjusts the height when I blind on the first line lines oder between (for example line 2 + 3 4).

  But if I want to blind on the last lines, there is a number at the end and an extra empty line with #.

  I know the # means hidden following text, but why it works with the red/green text.

  There are also some hidden text (green), but the brand # is just after the last word - not in a new line.

  Does anyone have a solution for this?

  Thanks in advance!

  

  So far, it's ok. A sign of the end of a text paragraph forces a new line.

  To change, do the following:

  For each condition, you need another condition for the paragraph sign that comes immediately after the condition. Not after each paragraph of a condition, but at the end of each consecutive numbers of the paragraphs of the same condition.

  So in your third example you will need more of two conditions:

  1. one for the paragraph at the end of the condition «meaasurements» sign

  2. one for the sign of paragraph at the end of the condition 'price 2 '.

  Whenever you perform other invisible conditions, you must also disable the new conditions that sign a single control paragraph.

  See the following screenshots:

  

  

  

  

  Uwe

• Problem by setting the page_items value into session using javascript

  Hi team,
  
  When I put in page article from the code below in javascript, it is not be defined.
  
  function showdetail (t, A, B)
  
  get var = new htmldb_Get (null, $x ('pFlowId') .value, null, & APP_PAGE_ID.);
  
  Get.Add('P1_H_A',A);
  Get.Add ('P1_H_B', B);
  
  }
  
  This code of java script after setting this process two fields hidden P1_H_A and P1_H_B, I call an on_demanad. Who uses this value filed hidden both in the pl/sql code.
  
  But this hidden fileds two P1_H_A and P1_H_B do not define themselves in the session.
  
  Please suggest me a way to solve this problem.
  
  Thank you and best regards,
  Rajendra Yadav
  
  Published by: rajendra on February 26, 2012 02:40

  Hello

  There are several errors in your JavaScript code.

  Try this:
  Application process to create On Demand MODEL from source

  htp.prn('OK');
  

  Then JavaScript

  function showdetail(t,A,B){
  var ajaxRequest = new htmldb_Get(null,$v("pFlowId"),"APPLICATION_PROCESS=DUMMY",$v("pFlowStepId"));
   ajaxRequest.add("P1_H_A",A);
   ajaxRequest.add("P1_H_B",B);
   var ajaxResult = ajaxRequest.get();
  }
  

  Kind regards
  Jari

  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• Problem in setting style during execution by using setStyle?

  In most tutorials for FLEX, I find affecting components Runtime Style is a problem

  Can someone please let me know what's at stake if we set the style in the runtime help by calling setStyle

  Thanks in advnace.

  Hi Kiran,

  Call the setStyle() method can result in reduced performance. Use it only when absolutely necessary.
  You should try to apply style sheets rather than using the setStyle() method because it is expensive. This method should only be used when you change styles an object during execution.
  You cannot get or set the style properties directly on a component that you can with other properties. Instead, you set the properties of style at run time by using ActionScript getStyle() and setStyle() methods.

  Hope this will make things clear...

  Thank you

  Jean Claude Chari

• Problem by setting the primary key: relaxation Assigned primary key in the sequence.

  I have a table and a trigger for insert/update on the table. Trigger I get the game of the primary key of a sequence. I tested unit by inserting records in the table. It works very well. Kets primary key the next sequence number.
  
  I use this table as an entity in my adf application. The primary key attribute is set to "DBSequence". But when inserted I do not receive the following sequence for the primary key. Instead it is inserting the temporary number - ve that assigns the adf.
  
  I use JDeveloper 11 g.
  
  
  Can someone tell me what could be the problem?

  Your trigger should be something like:

  create or replace TRIGGER "SID_ASSIGN"
   before INSERT
   ON MY_TABLE
   FOR EACH ROW
  
  BEGIN
  
  if :new.SID is null or :new.SID < 0 then
     SELECT MASTER_SID_SEQUENCE.nextval into :new.SID from dual ;
  end if;
  END;
  

  You can refer to the guide of Dev of 11g for more details on this...

  Julian

• Problem after setting some preferences in Firefox, it began to reload all the images in the visited web pages previously, which resulted in a significant slow

  I spend time with the preferences of Firefox where I was set up, after a few tweeaks, he began to reload all the images previously visited web pages, one of the sites where my own: http://netsalg.biz so I know that's not the question, but this resulted in a significant slowdown of the browser - what is my next step - a new installation? or can it be fixed

  try a reset to reset all preferences of firefox: Firefox Refresh - reset the parameters and modules