Time does not automatically refresh in computer hp laptop g62-457dx

Similar Questions

• my wifi is not working, and my troubleshooting does not start on my computer toshiba laptop? and he tells me that my bluetooth must be turned on?

  my laptop WiFi does not work and when I try to trouble shoot the problem he told me that my troubleshooting does not start and also, I get a message telling me that my Bluetooth is turned off?, but this problem all started when I tried to sing on the web and it keep going back to the sign in screen then I cleaned a lot and finally was a less able to get to my office on it but still no wifi and not able to start troubleshooting and still receive a Bluetooth message not on. ????? Help! Please, I beg you!

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the computer?

  2. what exactly happens when you try to connect to a WI - FI connection?

  3. you get any error message?

  4. are you able to connect to the Internet by cable?

  5 are. what store you referring?

  6. what operating system is installed on your computer?

  7. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  If this is a recent problem, then you can try a system restore to Normal mode or safe mode and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please follow these recommended steps and post if you still experience the problem.

• Windows 7 does not start in the computer hp laptop

  Hello

  I saw the back of the office, where I work in the best web design company in the United States, both in India, my cell phone was frozen. Who went on to become of some process, but after I saw that the laptop has been frozen & there is no other choice to stop the laptop, because windows warned to for updates. I tried HP Recovery Manager, but system restore has been grayed out & I was not able to click on it!

  I don't have recovery CD so what can do about it?

  Kindly guide me for the same thing.

  Thank you

  Arun Nair

  Hello arunnair988. I understand that your laptop has frozen during an update, forcing you to restart from the beginning. Now you need to get back to a working condition operating system, but do not have any recovery media or Microsoft Restore Points. Is this correct?

  You have two options. The first is to try a System Recovery HP instead of a Microsoft System Restore. The difference is that a restore back your system files to a known point of work at the time, but let your personal files for the most part intact. A recovery is a reinstallation of the operating system. Will lose all data that are not backed up before recovery Follow these steps to perform a restore without any disk.

  If this does not work, or you want to get the physical disks, you will need to contact HP directly. If you are currently in the USA/Canada you can call to the 1-800-474-6836. If you are in another region, you will need to visit this site to get contact information for your region.

  I hope you find this useful arunnair988 of information; have a great day!

• The keypad does not work on my computer hp laptop g72,

  The keypad does not work on my laptop hp g72, NumLock, slash, star, dashboard and more keys only work all digital and 'point' or 'period' keys don't work. Help, please.

  Hello

  You need to contact HP support, check their online documentation and drivers, diagnostics and ask for their
  Forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Sims 1 does not start on my computer dell laptop windows vista 64-bit?

  I put in the disc, and the splash screen, or whatever, the part where you should be able to hit the installation won't even pop up. nothing happens. I tried to install it but now I can't. Help, please!

  Hello Mhar09.

  Unfortunately, the Sims 1 uses a 16-bit installation program, which does not work on 64-bit Windows.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• sound does not come on the computer pavilion laptop

  I was using my computer when there was a popup for an update from hp. I've updated and then restarted the computer, but there was not his coming out. everything worked well, just noise. On the small speaker mixer microphone icon shows that he has his fate. even when I adjust the volume the ping that is supposed to be heard is not there, but it shows as green and spikes to show that there is a sound that is supposed to be there. How can I fix it?

  "Laptop HP Pavilion dm4-2191us

  Product number: QE382UA

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 8.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• After upgrade to El Capitan Time Machine does not automatically

  Recently, I upgraded my Macbook Pro and iMac 24 to El Capitan.  Time Machine does not automatically work on the iMac.   I now use the backup to get a backup to run.  MacBook Pro is very well.

  Thinking that this might be the associated time Capsule, I removed the disc from the Capsule and ran Spinrite on it.  Car is very good.  Then I deleted all the files on the Time Capsule and created new Time machine backups on two computers.  No problem, except the iMac not run automatically Time machine.

  And yes the selection for Time Machine is configured to run automatically.

  A bug in OS X 10.11.1 prevents automatic backups that happens when a desktop Mac (iMac, Mac mini or Mac Pro) is connected to a UPS (UPS) with the USB feature.

  Please, back up all data before proceeding.

  First, check the App Store for a later update to OS X. If it is available when you read this review, install it and see if the problem is resolved. I speak not beta versions.

  Otherwise, you can work around the bug as follows.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo defaults write /Library/Preferences/com.apple.TimeMachine RequiresACPower 0

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal.

  Restart the computer and test.

  (Credit for this solution for chrfr of logicielmac.com).

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• date and time do not automatically change it remains the same as the last time that I turned off the computer, it has recently started to happen

  The date and time do not automatically change when I turn on the computer, it has recently been like that.  I have change the settings manually and everything is ok until I turn on the computer the next day.

  The date and time do not automatically change when I turn on the computer, it has recently been like that.  I have change the settings manually and everything is ok until I turn on the computer the next day.

  Change the battery on the motherboard.
  http://www.computerhope.com/issues/ch000239.htm

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• UPDATES DOES NOT AUTOMATICALLY CROSS!

  My fair updates will not automatically refresh and the little icon saying that windows cannot check the updates and an error keeps the code number: 8024402F. I tried to reset the automatic section but it just won't download updates automatically. I am on Vista Home Premium and also on all browsers last as IE9, etc. Driving me crazy. Can anyone help? I just want to know why it is he said that everything is normal and ok, but when I check the updates, it comes back with this message. Tried the name problems... you it we did. It is just too difficult to do manually.
  Thank you
  Carleen

  Duplicate the content of the Post-
  updates
  Why can't that get updated? Does the automatic system even if that's all. It comes up with the error code: 8024402F all the time! All this effect tried but noting seems to be stuck on 10/10/12? Any suggestions please.

  Why is my so slow IE9 at this time?
  It takes forever just to download any web page? I was wondering what I can do?

  Hello
  A solution is pasted below
  It's the second week trebuchee solution on and counts down 20 21 computers fixed 9Windows7 & Vista)

  I had this problem as well and tried many recommendations, but none apparently worked. On the update box on my computer has recently tried update was NEVER.
  So if you have this perhaps it will work for you I tried a certain path with all have the same apparent result with error 8024402F coming.
  It is a such crazy crazy world that we live (murphies law seems to be in control.)
  Do the opposite which is logical
  First define your update affecting NEVER RECEIVE UPDATES, then UNCHECK the two boxes below if they are checked (a topic everyone can update,) and the other to be informed of the available updates. (That one a box Monte are you shore you want to not be notified etc..)
  NOW USING MURPHIES LAW leave all settings for example being NOTHING of WORK SHOULD
  NOW CLICK THE BUTTON UPDATE, SURPRISE SURPRISE, NOW, YOU CAN REFRESH. !!!
  After update, search for new updates after the first batch.
  Then the settings can be set back to normal for example receive updates automatically, check the other two boxes.

• LL780 - Media does not automatically starting from tray 2

  I have a L7780 using Vista, XP and MAC OS. When Tray 1 is empty, the printer does not automatically draw/pull out tray 2. I get a condition "on paper." I have reset the printer to set up factory and have re-installed the latest drivers from the computer. This feature is published on page 40 of the operating manual. According to HP, this feature does not exist, however, I find that hard to believe since the manual stipulates that to this and I think at one time my printer did move to tray 2 when Tray 1 is empty. I use the LL780 in a network environment with multiple computers. The driver and the latest firmware is installed. I find the following link that deals with a "condition of paper output. I tried all the suggestions and it still does not work. I use plain white paper for all trays.

  http://support.HP.com/us-en/document/c00786157

  My first quesiton is, if somebody has got the LL7780 to automatically select tray 2 when Tray 1 is empty?

  Second, if so, it only worked when Tray 1 is empty at first or did the printer run out all the paper on tray 1 and then automatically move to tray 2.

  Thank you!

  HP released an update of firmware for this particular issue.

  Click here

• Satellite L500-208 does not automatically go to power saving mode

  Dear guys,

  I have a Satellite L500-208 (Serial: PSLS9E) with pre installed Windows 7 64-bit.
  For some time, the laptop does not automatically energy saving mode (as configured in the Power Options).

  Automatic change "Energy saving" worked some time ago and all of a sudden, it stopped.
  However, I do not remember what changed and probably caused the problem.

  Everything works fine and a manual of hitting on "Energy Save Button" also works very well...

  Before you guys suggest an update of the BIOS, the BIOS is version 1.60.
  Current version is 1.90 (or same 2.00?).
  Well, I missed an update and from the Toshiba Web space seems to be very rare, they offer only the latest version of the BIOS.

  Can someone points me to older versions of BIOS, or any that may give a clue to the strange behavior power?

  Kind regards
  Frank

  Hello

  Maybe there's something wrong with the Eco utility.
  I recommend reinstall this tool.
  On the European driver Toshiba page, you will find this tool.
  After the new installation, please check the settings provided by the Eco utility.
  Eventually, you will need to activate the energy saving mode automatic

  Good luck

• Toshiba Canvio Basics HARD drive does not appear in my computer

  Hello

  I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

  Please help and Windows 7 or windows 8.1 PC do the same thing.

  Hello

  I found the description of the product of this external HARD disk:

  Product features:
  • USB 3.0 - powered portable add-on storage.
  • Voltage of bus capable USB, no need for AC adapter.
  • Easy to use with no software to install.
  • Adapts to large digital files with spacious storage capacity.
  • Protect your drive (internal shock sensor and ramp loading technology).

  Specifications
  • Capacity: 1.0 TB
  • Interface: USB 3.0
  • Transfer rate: up to 5 Gb/s
  • Speed: 5 400 rpm
  • Average access time: 12ms
  • Cache buffer: 8 MB

  It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
  The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
  Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable