Sound in the Simulator?

Similar Questions

• How to play mp3 in the simulator of Tablet

  I want to integrate its App, the snippet of code as follows:

  Sound/speakers in the Simulator do not currently work.  We hope that in the next version of the SDK.  If it works as an AIR application, you are safe to assume that it will work on the device end probbly.

• Remove keyboard sounds at the Conclusion of the project

  How can I remove the keyboard sounds when a simulation has been registered?  Are there options, or this can be done at time of registration?

  Thank you.

  Not like you can uncheck clicks. Maybe try to work around the problem: the file used for the sound of the keyboard is in the Gallery\Soundeffects. Keep the original file (rename), but replace it with a file with the same name and no sound?

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• MacPro 2009 suddenly lost sound and the start-up time is more than a minute

  Hi just a couple of days my MacPro in early 2009 has started to take well over a minute to start when she used to take less than 30 seconds.

  Around the same time, I lost the sound of my Analog Audio Line out port.  (Don't know if there is any connection.)

  I can still use my head set for its ok when plugged into a USB port.

  When I go to the sound pane there is no visible line output port.  I have a Boise radio connected to the line port, having the sound transmitted by the intermediary for the auxiliary voltage on the radio.  It has been working well for many years.

  I tried to plug into a spare set of powered speakers, the choice of output Line Out appeared in the pane sound but still cannot get any sound from the speakers when I chose it.

  The loss of the noise is a nuisance, but I can still use my head set.

  It is the slow-start up that bothers me, although once it has finally started the computer works very well and reacts quickly.

  Something has changed dramatically, and I feel that something happens and it doesn't bode well for me.

  Hope someone can give me some good news and a difficulty.

  Thank you

  Try to open disk utility and repair the drive.

  Also, consider posting a report of EtreCheck. This can help us to get to the bottom of your sound issue as well. http://etresoft.com/etrecheck

• I don't hear the sound of the iPhone 6

  I make my hear the sound of the iPhone 6 and when I call as I can't hear anything on the other side

  Hello. Visit this link please, https://support.apple.com/en-us/HT203800

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• Music and sounds of the game won't play; all other sounds work

  I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• No sound from the HDMI connection Toshiba Bluray player BDX2100

  Hello

  I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

  There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
  Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

  The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

  -musicman1982

  Hi mate

  It is a Toshiba computer / laptop computer forum.
  You will meet people who want to talk about options for laptops and Toshiba laptops.
  I doubt anyone here would be able to help you with this drive blueray.

  But in your case, I would first check the settings of the TV you.
  Check whether the sound via the HDMI port is enabled.

  > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
  I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

  I recommend also consulted this blueray Player user manual.

• No sound on the Port Replicator port II (Tecra S11 - 12M)

  Hello! Because today, I have no sound on my sound from the Port Replicator II (PA3680E-1PRP) plug to run my external speakers. Instead, the internal speakers are running. On the laptop itself, making works well, only the port replicator appears to be dead.

  It has worked well over 10 months now without any complaint. I've seen a few similar cases in forums but no answer that could help me. I didn't lie all the drivers again.

  I work with WIN7/64-bit Service Pack 1.

  Anyone know how to fix?

  Thank you, christophe

  Hello

  Recommend to check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=56460

  * Milo_Tweenie wrote: *.

  + Did not know that the audio 3.5 mm output jack is actually run by a USB hub in the duplicator. +
  + Concluded that the multimedia USB Audio Device was not installed driver for the audio port. Click the button to update the driver, it has found the driver automatically and now I have sound. +

• Qosmio X 70-A-12 X - no sound through the HDMI connection

  Qosmio X 70-A-12 X - Windows 7

  I have tried everything regarding this issue, lost 12 hours of research and asking everyone... I hope that you will give me the answer. I tried to install the drivers for different processor, Intel based, each time nothing, I have a controller, video, audio and Conexant smartaudio HD game.

  I also tried letting windows install their own driver. Windows Media Monitor... I have this case HDMI is shown but gray color, as there is nothing plugged. When I click Properties it says that everything is ok and active... so thank you for reading this. If you know another way to activate the sound via HDMI, I would be very grateful.

  PS - I picture on HDMI, but no sound.

  Thank you!!! :)

  Hello

  I checked the Toshiba download page and I can see your Qosmio machine is supported for Win7 64 bit and I think that you are using this version.
  I see ago offered all the important factors like driver chipset driver driver sound or display, so I hope everything works out well and there is no reason for experiences drivers.

  I would like to know if there is a problem when you use your machine without connect anything to it? is everything is OK with the material? You hear the sound on the internal speakers or headphones?

  To your HDMI issue: can you please explain what you are trying to do exactly?
  Are you trying to use your Qosmio with TV or what? When you open the properties of the sound > playback devices have tried to activate the listed device output digital (HDMI) and set its default value?

  By the way:
  Click on the volume icon in the taskbar and click mixer.
  Digital output is listed here? Check it out in the operative part of the option. Make sure that is not set to mute.

  Play a little with all these settings to make sure that everything is OK.