Sound of Lenovo A62 via dvi

Similar Questions

• Cannot get 2560 x 1440 on U2713HM via DVI - D of Latitude E7470

  I have a brand new Dell Latitude E7470 connected to a Dell E-Port Plus Advanced Port Replicator (model PR02X). I have the E-Port Plus, connected to 2 monitors - a brand new P2414H Dell via DisplayPort on Video 1 and a Dell U2713HM via DVI - D on Video 2 (see diagram below). Can I use two screens, but although the E7470 correctly identifies the U2713HM, it offers only as the highest resolution up to 1920 x 1200.
  According to the website of Dell and this forum, the U2713HM supports the complete resolution of 2560 x 1440 via DisplayPort * or * DVI - D (no HDMI), but even if it is connected to DVI - D, I can't put it in 2560 x 1440.
  Why is this and how to get the resolution full 2560 x 1440 via DVI - D link? As it is, it seems blurred and just awful.
  A little background extra. I have a setup of 3 monitor with the U2713HM in the middle and shared between the E7470 laptop and my office. I have my desktop connected to the U2713HM on the DisplayPort, so I can't use the E7470/E-Port Plus to the U2713HM DisplayPort. When I go to the U2713HM on the desktop on the DisplayPort, I get the full 2560 x 1440 resolution and it's fantastic.
  

  OK, no ports DVI on any Dell E-platforms will be higher than 1920 x 1200.

  Maximum resolution P2414H = 1920 x 1080
  Video of P2414H in ports = DP, DVI, VGA

  Maximum resolution of DP and DVI - D U2713HM = 2560 x 1440
  Video of U2713HM in ports = DP, VGA, DVI - D, HDMI

  The installer suggested =
  Docking station video 1 DVI out--> DVI to DVI cable--> DVI P2414H 1920 x 1080
  Video docking station 2 DP on--> cable of DP to DP---> U2713HM DP in 2560 x 1440
  Computer DVI out--> cable DVI to DVI--> U2713HM DVI in 2560 x 1440
  Exit desktop VGA--> VGA cable VGA--> Samsung 275 t VGA 1920 x 1080?

• sound via DVI - D to HDMI

  I recently acquired a renovated Pavilion P7-1010 running Windows 7. It has no HDMI output, but it has a DVI - D output. I would like to hear the sound through the speakers integrated HDTV (I don't have speakers or an external audio system). I tried to use a DVI-D-HDMI cable and get a picture, but no sound. Is it possible to send sound via the DVI - D port?

  This widget could not be displayed.

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• No sound on LG display via USB - C

  I just got a LG 27UD88 display to a MacBook. The monitor supports USB - C and claims to support audio over USB - C. The MacBook is connected only via the USB - C cable.

  • Powered MacBook & recharge?
  • Video work?
  • Display USB hub work?
  • Audio through speakers display?

  The MacBook certainly sees the LG monitor as an audio output device. System Preferences > Sound > result lists both options

  • Internal (built-in) speakers
  • LG Ultra HD (DisplayPort)

  When the LG is selected, however, there is no audio. Volume level on the screen is up.

  Any suggestions?

  Could check you if the monitor has speakers built in? I saw this monitor, too, but I think that it has only a 5mm 3 speaker, (which could refer to the "internal speaker" option).

• Problems connecting via DVI - Pavlion S3140 Slimline port. SC

  I have two video ports on the PC. An integrated on the motherbooard, the other via PCI-E (NVIDIA geforce 7500LE). I am not able to get in touch with via the last of them. Advice appreciated! Frank

  Message edited by FraRol on 12/14/2008 06:30

  We can't use as well a built-in video port and a video port PCI - e at the same time.  You will need to purchase and install a PCI-e video card that has two DVI 2 ports.

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• How to disable the sound on Lenovo B570e meter

  I use Windows 8, in which there is a built-in volume with a small change indicator No volume and I like very much. How can I turn off the indicator of volume of Lenovo? It changed only ten steps the volume and it really lacks (once supported on Fn + left - the sound of quiet, you press Fn + right - already screaming). This absence is not exist in the standard volume indicator Windows 8 and I want to disable the volume inlikator Lenovo. How to do?

  I accidentally found the perfect solution! To use the default value for Windows 8, need to press Ctrl + Fn + right volume control / Ctrl + Fn + left respectively. Then the volume indicator that contains no Lenovo and volume changes in small steps (which is what I was going to)

• w2216h via DVI - flicker, too much text, etc.

  Hello. I'm on a HP a6614f with screen w2216h.

  I have upgraded to a Nvidia GeForce 9500 GT from PNY video card and have been connecting the monitor and the card via VGA. Today I received my DVI-HDMI adapter (down a cheap eBay HK if it makes a difference) in the mail and tried out. The image was horrible! There are vertical lines everywhere. I could solve this problem by going to the Nvidia Control Panel and change the format digital color of RGB to YCbCr44. However, I always had other problems.

  The screen flickers a lot, sometimes to two or three seconds at a time, or even longer. Text would also look too strong, making it hard to read, and it is an area in the middle of the screen where the text would be a blur. The blur seems to correct itself (I didn't really do anything but to disconnect and reconnect the HDMI cable to the end of the adapter) but the problem of a text sharpness and flicker still exists. Also, the colors were a bit off. For example, the red underlining of Firefox for misspelled words appear gray.

  My resolution when you use VGA is 1680 x 1050, which is the native resolution. When I switch to HDMI, the native resolution is higher than this and when changed to that resolution is horrible. The edges are cut off or something, so I left it to 1680 x 1050, which is what I am anyway.

  Anyone has ideas how solve my problems? I am currently using VGA.

  Any help would be appreciated. Thank you!

  Message edited by crosswithyou on 10/01/2009 15:55
  Message edited by crosswithyou on 10/01/2009 15:57

  Juggle with the ClearType settings seems to have solved the problem. Hooray!

• I tried to connect via / DVI to hdmi and it does not wrk

  If I have vga and dvi on my screen but only vga on my computer is - it say that I did not compatible computer to run hdmi to my screen?

  Hi lastace,

  If your vga port is blue, this means that it is a D - Sub connection.

  With D - Sub, you can buy a connector which can convert the output D - Sub to DVI, but unfortunately, not HDMI.

  So in your case, you can connect your monitor via D - Sub (VGA) or DVI but not HDMI unless you have a HDMI port your

  laptop. Sorry I couldn't give you good news.

  I hope this helps!

• Windows 7 Home Premium does not start and an external monitor connected via DVI to HDMI Cable

  I have a Dell Inspiron 531 desktop computer with a NVIDEA GeForce 8400 GS video card.  This video card has the following outputs: DVI, VGA and S-video.  When I connect it to my computer via the VGA port to PC to my Sony Bravia KDL-40XBR4 monitor port, the machine starts perfectly.  If I connect via a HDMI cable to one of the HDMI monitor DVI ports, the screen displays the video BIOS, but turns black when the operating system begins to load.  If I connect another monitor to the VGA port, yet once the machine boots fine, but if I connect the monitor to the computer and the Sony Bravia, once again the machine does not start.  The strange thing is that if I boot with only the connected computer screen and then plug the DVI to HDMI cable, then Windows 7 sees the Sony Bravia monitor very well, and I can extend the desktop.  If the machine mode 'sleep', both monitors work very well to wake up the PC.  So, if the Sony Bravia is connected alone or with the computer screen, the machine does not start (the screen will display 'go black' when the OS starts to load.)  I tried to run Windows in Mode safe, but he won't either.  I have all the updates of Windows applied and have installed the latest drivers from nVidea so.

  Hey Chris,

  First of all, about climbing, is not a technical support; This is a community forum where MS moderator and contributors are involved.  Now to your question ~

  It's very strange that the PC does not start when this unit is connected, but works fine when connected after the fact.  I've seen several cases where a hardware configuration of uinsusal will prevent a PC to boot.  I think that the culprit may be DVI to HDMI Cable that you are using.  If I were you, I try to connect the PC to a DVI monitor and see if it boots normally.  Also, see if the monitor can prevent another PC to start when it is connected directly via the HDMI.

  Good luck! Let us know how it turns out.

• HT-TC 260 Sound does not work via the video inputs

  I recently bought a bar of its HT-CT260.  If I plug the cable box bar using the optical connection, then it works fine.  If I plug the optical connection between the TV and my PS3, then it works fine.  But I get no sound, if I plug the bar directly to the optical input on my Sony KDL-40xbr2.

  Oddly enough, the bar works (TV at the bar) if the TV is on channel antanna, but not if I use the video inputs for my box of cable and the PS3.

  Spend 3 hours with Sony (useless) online support and assistance phone sony (well, but not solves is not the problem).

  The optical plug is designed to produce sounds when the content you watch contains audio digital. (PCM or Dolby Digital® technology) This feature is available on a selection of digital and video streaming shows and is not compatible with the standard of cable stations or analogue.

  The KDL-40XBR2 TV can only output sound via the connection perspective If the TV is using its own tuner (i.e. If the TV is connected to an antenna or direct cable line in the wall) which explains why you do not get sound when using the video inputs because cable box and PS3 use external tuners to your TV.

  If my post answered your question, please click "accept as a Solution.
  This will help other users to easily find their answers when you browse the site of the community of Sony.

• problem with sound, for lenovo 3000 N500 laptop

  Hi, I have a problem with my new lenovo 3000 N500 notebook.

  I have Windows Vista Starter and Conexant SmartAudio Systems audio software (I don't know if it is a driver)

  These are the problems I have:

  1 - sometimes I can't hear any sound from internal speakers of the machine. I should restart the computer or turn it to stand by mode and once restarted, I can hear the sound.

  Sometimes I start my computer and I hear from the beginning, but I turn the machine switch and restart I hear sound.

  2 - when I connect I hear any noise, never helmet. I restart the computer, but I can still hear all the sounds. I only hear the typical sound of the speakers connected but unrecognized (soft Dominica).

  Please help me

  Thank you for all your attention

  Try to update the driver, you can fint here:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70898

  I hope this works!

  Vamos Chile!

• P70 - A satellite - after victory 8.1 update no sound on the TV via HDMI

  Hello

  I bought my laptop 3 months ago and I didn't have any problems until today.
  Yesterday I updated to Windows 8.1 and since then, I have a problem with the HDMI output...

  I connect to my laptop to the TV and the video is ok but his continuous in the laptop.
  I go to control panel > Sound > playback, but the HDMI output icon is missing.
  I can only see the audio speakers (conexant HD Smart) icon

  I tried to restore my laptop to an earlier state (the only one I could choose was yesterday) and it worked fine, but when I changed my computer laptop and then changed again to a second display screen...
  . It happens again... Output HDMI icon disappeared again

  Anyone know if this has to do with the upgrade to windows 8.1?

  How can I fix because until yesterday, everything worked well
  Thank you

  P.D.: Excuse my English... I m from Spain

  I don't have this model, but on my Satellite everything works correctly after upgrade Win8.1.
  Have you installed upgrading Toshiba instructions and document of instructions to facilities offered on Toshiba download and support page?

  By the way: can you please send name of full model of your laptop?

• PAV 14 14-v148ca laptop: no sound on my TV via HDMI cable more

  I used to have the sound on my TV, I tried 2 HDMI cables still nothing.

  I tried to download the links drivers on a separate thread, I found, my laptop does not support.

  I have the video, no sound on my TV when the hdmi cable is connected.

  In the sounds/reading frame, there is only speaker hp and helmet, no television while the cable is connected.

  Please help, this laptop is 5 months old... Didn't!

  On a separate note, why this portable plant so? Because of the Hexacore?

  I click with the right button in the playback window / audio, and click disabled devices. Voila, corrected!