sound of the headphones, but no speakers

Similar Questions

• I have Annoying problem, I can hear the sound of the headphones and portable speakers...?

  I recently bought (Dell inspiron 3537), windows 7 64-bit (6.1 build 7601), more info on first image,.

  http://i.imgur.com/SBEezVe.PNG

  but I have a problem when I have a headphones connection to the laptop... the headset works well, BUT I can hear the sound of the headphones and computer speakers posing problem, I want to hear the sound of the headphones only, see the shot of images >

  http://i.imgur.com/lpkKxMp.PNG
  http://i.imgur.com/MXmP6FL.PNG
  http://i.imgur.com/WCpTZCI.PNG
  http://i.imgur.com/ikDKvr1.PNG
  http://i.imgur.com/UIYDAVD.PNG
  http://i.imgur.com/nsrreYQ.PNG

  can you help me please?

  1. open the Device Manager and right click on Realtek High Definition Audio.

  2 Select this option to "Update driver software".

  3. click on "Browse my computer for driver software".

  4. click on "Let Me pick from a list of drivers on my computer".

  5. put the "Show compatible hardware" check box if not already checked.

  6. in the list of devices, click on 'High Definition Audio'.

  7, click on "next".

  8. in the update driver warning box, click 'Yes' (the driver).

  Install the native driver. Immediately test the headphones/speakers.

  If the list of drivers to step 6 do not include "High Definition Audio" then please use the Windows system restore. It is quite safe to use because if you don't like the results, you can undo the restore operation.

• Satellite M305D: No sound through the headphones but the speakers don't work

  Hey,.

  I have a M305D I reformatted and installed Vista Ultimate. I installed all necessary drivers.

  However, when I plug the headphones in the headphone jack I have no sound in headphones and the loudspeakers continue to play.

  I don't know if the socket has worked before I refomrated.

  So I can't tell if it's a pre-existing condition.

  Assistance on the issue of the helmet would be greatly appreciated.

  Hello

  Have you tested with another helmet?

  Maybe the little switch that is part of the headphone jack works not properly and doesn t switch between speakers and headphones.
  In this case the question would be related to hardware

  I m not very well if this problem could be related to a malfunction of the software, but it would be really interesting to know if the problem persists after installing the OS from the recovery DVD.

• sound of the headphones, but not the speakers with inspiron 1526

  I have a laptop Inspiron 1526, Windows Vista, 3 GB. This week I lost my sound (loudspeakers), but I can get sound with headphones. My speaker on sounds and Audio devices configuration is ok. Speaker leads are not broken. I have reinstalled audio driver a few times. No results!

  Thank you!

  
  

• HELP: k900 no sound in the headphones only in speakers

  Hey,.

  I just get my k900 phone, but I have a problem: when I start to play music on spotify, or otherwise sound speakers not in headphones (Yes, I checked, they are plugged correctly and they work completely fine with my computer) should I change something in the settings or what happens?

  Hi, thanks for the suggestion, the problem is resolved after re-boot,

  Best regards

• Satellite C660 - no sound headphones but through speakers - Win7

  I know that many people here have the same problem, but so far I have found no solution.
  My sound card is a Realtek. After you have reinstalled Windows 7 I have no sound on my headset so that I have some of my speakers.

  As soon as I connect the headphones, the Realtek Manager appears and I choose headphones but if I press the 'Test' button there is no sound and no sound if I play music.
  Any des/re-reinstalling drivers does not fix.

  I should mention that my headset works perfectly with Ubuntu. The input jack is good.
  In "Playback devices" icon of sound control, the entry "Speakers" "puts in default" in gray.

  Many thanks for any help.

  Kind regards.

  > As soon as I connect the headphones, the Realtek Manager appears and I choose the headphones, but if I press the 'Test' button there is no sound and no sound if I play music.

  Go to the dashboard-> Realtek HD audio manager

  Here, you should see the speakers on the tab. Click on the yellow folder in the upper right.
  Ensure that the option disable front jack detection is NOT checked.
  Also check out the option down called enable auto popup dialogue box
  [Screenshot of audio driver Realtek HD | https://itpendium.files.wordpress.com/2009/05/14-realtek-hd-audio-manager-big.jpg]

  By the way: in the control panel-> sound-> reading tab right click and mark both options see the disabled devices, show hidden devices
  Now, you should also see the headset plug. In case it has been disabled, you could make it active.

• hear the headphones instead of speakers

  On an Z210 workstation, I plug in a headset to work known with headphones and microphone in the sockets on the front or back and hear the sounds through the speakers from the computer instead of the helmet headset.  Microphone seems to work because the other person can hear me on a gotomeeting.  How to get the windows media player sounds or other programs to send the sounds in the headphones?

  Hello

  Please try the following, first you must remove the audio inputs, you have in Device Manager, which are not NVIDIA. Those who must be related to the NVIDIA video card yo uhave.

  Then, install the following drivers:

  Driver Chipset

  Audio driver

  Let me know if this helps solve the problem.

  Thank you

• I have no sound card, so, how can I get the sound to the headphone,

  I had to reload XP on my Dell T3400. I don't have a card's equipped. I used to listen to music through the headset by using media player. Now the media player won't say I have no sound card, which I did not.

  I am able not to circumvent the "no sound card" and send sound to the headphone jack or better yet, Jack green at the back of the computer.  It used to work before I formatted, but I don't know what I did before.
  Thank you very much

  I solved the problem. I have downloaded a driver sound (Soundmax) and now it works fine.

• How to play audio through the headphones and computer speakers, at the same time.

  Hey I just need to know how to play sounds through the headphones and speakers. Help

  Depends on your audio device.

  If its edge, while normally when you plug the headset switch will cut off the speakers.

  If you have a USB or Firewire pro device you can listen to your headphones as the signal played through your speakers.

  See you soon,.
  Jerry

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Satellie L500-1CQ - sound of the headphones and speakers at the same time

  When I plug my headphones in the sound plays with my speakers and my helmet. My headset is not broken and they work elsewhere.

  Hello

  Have you tested other headphones or external speakers? If this isn't the case, you should do this!

  In addition, I miss important information about your operating system and the audio driver. You should try to update the audio driver. The latest version, you can find the Toshiba site.

• Satellite L750 - no sound via the Jack, only through speakers

  I searched everywhere on forums but nothing works.

  When I plug my headphones in, nothing happens. The sound continues to play music through the speakers.
  My laptop doesn't "notice" that I plugged in the headphones. (helmet works on other devices)

  I reinstalled the drivers for the sound.

  In the SmartAudio program I can't press the button on headset for all parameters
  Can I try or if my Jack is broken?

  Help, please

  Usually after connecting portable headset should automatically detect and SmartAudio (Volume Mixer) it detects too. In the place where you see the graph of your laptop, it will be shown graphic connected headphones.

  There is nothing between the headphones and build-in speakers. It works automatically.
  When you connect the headphones there is a little switch that helps for laptop to recognize if the external device is connected. Theoretically, it may be defective.

  Since when do you have this little problem with headphones?
  What you can do is visit your local retailer or PC shop and get a small adapter Headset USB.
  It may be little work around and a temporary solution for you.

• Equium L40 - lost sound in the headphone

  Hi, hoping someone can help.

  My current audio driver is Soundmax Integrated Digital HD Audio. And from what I remember forever. I downloaded it several times on the Toshiba site for my computer and it always comes back to this driver.
  The problem I have is that somewhere along the line he lost his in the helmet. I can say is if I have a hardware problem or if the plug is broken. I installed Windows 7, but the problem was there when I got the original program of Vista installed.

  A few things, my system tells me (not sure if it helps)

  Location 0 (internal high definition Audio Bus)
  C:\Windows\system32\drivers\ADIHdAud.sys
  C:\Windows\system32\drivers\drmk.sys
  C:\Windows\system32\drivers\portcls.sys

  If I can't solve this problem because it's taking someone can tell me of another line to listen to I could use please? possibly to USB.

  Thanks for reading.

  Hey Buddy,

  You hear the sound through the internal speakers?
  This means that the problem is that the headphone jacket?

  I think that if the internal speakers work but not the external speakers or headphones that it seems to be a hardware problem. You also verified that the windows audio audio output port settings?

  In the worst cases, you need professional help of an authorized service provider. Here is a list of them:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• NVIDIA HDMI output - not plugged in (?) = no sound on the TV, but great picture!

  Hello

  I'm not very experienced in the computer, but I know now that the connection from your laptop to a flat screen HDMI cable TV is not as easy as it should be...

  Description of the problem: no sound, but the big picture on the TV when connecting to my HP dv7 entertainment PC through HDMI to it. Specifically: for NVIDIA HDMI output icon is grey and not active in the "pilot sounds and reading - menu" - you can not simply give (other icons that are active are: speakers and headphones double, double independent headphone & SPDIF). You can also see the TV under "Control panel" > "Devices and printers" - so the tv is connected. In Device Manager, I see that I have 2 sound processors (?) "IDT High Definition Audio CODEC" and "NVIDIA High Definition Audio" - I don't know one that is used for the HDMI connection.

  I have at my own risk installed the latest driver (?) for my graphics (NVIDIA Geforce 9600 M GT) - before I did, the NVIDIA HDMI output icon participated actively in the "... sound"-menu (so you can turn it, etc.)- but no sound on the TV and then either...

  I suspect there to be something wrong with the drivers for my graphics card or processor... or maybe you can't send sound to the tv with my cable? It's a standard HDMI cable...

  Laptop model nr: HP Pavilion dv7-1094eo

  Operating system: Windows 7 Professional 64-bit don't know ServicePack... .

  Graphics card: NVIDIA GeForce 9600M GT

  HDMI cable, tv LCD Philips model: 37PFL7605H

  If someone could help please advise me on what drivers to install or anything else, I would be very grateful!

  / Marie
  

  First do you uninstall IDT High-Definition Audio CODEC Driver and NVIDIA GeForce 9600 M GT drivers by going to

  Control Panel\Programs\Programs and features.

  In case if request you a restart of the computer, please make sure that restart you one after the other. Do NOT avoid restarting the computer.  So go ahead and download view updated and audio drivers from the HP website here.

  Yet once, after installation if you are prompted to restart the computer, go ahead and restart the computer. Once done, go to:

  Control Panel\Hardware and the sound and click on sound. On the Read tab, right-click on the white (empty) space and you will see 2 options (see the disabled devices and show disconnected devices). Make sure that both options are checked for all devices listed reading.

  Now, right click on the option to output HDMI device and make sure that the option "set as default device" is selected for the sound of the external display during playback picture on external monitor.