sound problem... pls read and tell me the solution

Similar Questions

• TCP Read and Write at the same time

  Hello everyone,

  I have a question about parallelism in TCP connections.

  I know that it is possible to read and write on the same connection ID.

  So, if you ReadTCP and WriteTCP block each other, if you use the same TCP connection ID?

  Or to request more precise if I run two while loops, in parallel, with one end by calling WriteTCP and the other called ReadTCP.

  one of the delay of loops (or block) will be the other if both loops call their VI TCP at the same time right?

  The system is Windows 7 and Labview 2012.

  Kind regards

  Sebastian

  They are perfectly parallel.  Just write in one and read it from the other.  There is no conflict.

  See My TCP articles for more details.

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the dr

  I recently tried to open a new pdf file using an existing program Acrobat Reader and it changed the extensions of all programs and .pdf desktop icons, making them unusable.  I uninstalled Reader and extensions have been fixed.  But when I installed the drive again - the latest version (DC) it happened again.  How can I fix it?  I am on Windows 7

  Hi donaldm78047015,

  Try the solution mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards

  Nicos

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• the adobe flash plugin failed and none of the solutions have helped

  the adobe flash plugin failed and none of the solutions listed in the section help objects! I tried all the solutions listed, but none seem to work.

  This has happened

  Each time Firefox opened

  He started a week ago ==

  Why Flash is now so unstable in Firefox? Flash broke down indicator is now a familiar visitor (it's usually when I refresh the page isn't extremely mortal!) But... I'll have to go back to IE to check the reliability with my own sites - which are heavily dependent on flash for animation and video. What can we do? My installations of Firefox and Flash are updated. Really disappointing.

• Interactive PDF Web sound-problems buttons will not play on the other, and ugly gray boxes are visible

  When I export my interactive pdf file and open the html or swf file, it works exactly as I want it, but it works on my computer because I have all the links and resources on my computer included in a zip file. The only way I can get others to see it seems to be downloading the zip on dropbox and others who download and then extract files, which is not practical. I would like to integrate the interactive pdf on a Web site or a blog, so it does not directly on the page without having to download all the recources publishes the new web feature seems it might be a good solution, but when I try to publish, it is not working properly users.

  

  My project is to play several audio files on the other, so if a user clicks a button sound is read, and if you click on another button, the first sound will not stop, they will play together. So, for example, if you click on the top button, a beat will play, and if you click on the guitar slot, a guitar sound will play on the beat. It works fine on my computer in the swf or html file, but for some reason any when I publish it to the web, it will only play a sound at the same time. The pace will just stop playing if you click on one of the instruments, which makes the entire project useless. Another problem is that I can't seem to remove the gray boxes without taking away his ability to make it sound. The first photo is that it is supposed to look like, and here's what it looks like when I publish it to the web:

  

  In addition, as you can see, it does not export as interactive PDF, it exports an indd file. It's clickable and interactive however, just with a few bugs.

  Can someone either help me to correct the parameters in the function of online publication, or to teach me another way to incorporate the project on a blog or a website?

  Thanks in advance.

  [Read https://forums.adobe.com/docs/DOC-7273]

  [Ask in the correct forum allows... Left the connections for specific program forum forum... MOD]

  Interactive PDF is a roll of the dice in a browser and using SWF out from. He died a technology as it is and will work on any mobile system, or on a desktop computer that does not have flash player installed.

  Without knowing what you were doing, it is impossible to tell you why post them online does not work for you but you should really take the time to know what interactive feature are and are not supported with each format.

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• the sound is saturated, reading looks like alvin & the chipmunks

  as explained in the title box

  Hi ddbls,

  ·         You have the latest audio drivers installed on the computer?

  Check to see if the following is useful.

  Method 1: Connect a different speaker and see if the problem persists.

  Method 2: Run the next Fixit tool and see if it helps.

  Diagnose and automatically repair audio playback problems

  Method 3:

  Step 1: You can try to uninstall/reinstall the sound card and then update the drivers.

  a. click the Start button and then right click on my computer. Click on Properties.

  b. go to the hardware tab and click on Device Manager.

  c. now extend sound, video and game controllers, right click on the sound card, and click Uninstall.

  Step 2: Log on to the cards computer\sound manufacturer site and update the latest audio drivers.

• A problem of speaker and silence at the master volume

  Hi I have a problem with the speaker. I can't hear the voices, with the earphone.there are a Mute check at the front, rear, subwoofer in the main volume. The microphone does not work as well. In the Control Panel, sound devices seems OK.

  Hello Tukangcomputer,

  Thank you for your message.  We will ensure that you have the latest audio driver for your computer.  Go to the website you computer manufacturer and download/install the latest audio driver for your device.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• reading and writing to the file on SD card

  I am currently using this code to read and write to files (credit is not because of me - I found these on the Board somewhere):

     private void writeFile(String data, String filePath)
      {
          try
          {
              FileConnection conn = (FileConnection)Connector.open(filePath,Connector.READ_WRITE);
              if (!conn.exists())
              {
                  Dialog.alert("No File Present Click to Create");
                  conn.create();
              }
  
              OutputStream out = conn.openOutputStream();
              byte[] b = data.trim().getBytes();
              String sb = new String(b);
              System.out.println("Bytes to String: " + sb);
  
              if(sb.length() == 0 )
                  System.out.println("String length is zero");
              else
                  System.out.println("String length is not zero" + sb.length());
  
              if(conn.canWrite())
              {
                  Dialog.alert("Writing");
                  out.write(b,0,sb.length());
              }
              else
                  System.out.println("Cannot write to this file");
  
              System.out.println("File Size is : "+ conn.fileSize());
              out.flush();
              out.close();
          }
          catch(Exception io)
          {
              test.setText("Exceptino Thrown from File" +io);
          }
  
      }
  
      private String readFile(String filePath)
      {
          try
          {
              FileConnection fconn = (FileConnection)Connector.open(filePath, Connector.READ);
              if (fconn.exists())
              {
                  InputStream input = fconn.openInputStream();
  
                  ByteArrayOutputStream baos = new ByteArrayOutputStream();
                  int j = 0;
                  while((j=input.read()) != -1) {
                      baos.write(j);
                  }
                  byte[] data = baos.toByteArray();
                  input.close();
  
                  String output = new String(data);
                  System.out.println("Output" + output);
  
                  fconn.close();
                  return output;
              }
              else
              {
                  System.out.println("File does not exist");
                  fconn.close();
                  return null;
              }
          }
          catch (Exception ioe) {
  
             System.out.println("Error:   " + ioe.toString());
             return null;
          }
  
      }
  

  When I try to write a string to a file and then read it again, I get a NullPointerException. When I check the folder that mimicks card SD card on my pc, there is no file created. is the above code ok?

  P.S. I use a simulator of the OS 5.0 and the SD card directory is configured to be somewhere on my desk.

  It is incredibly baroque and inefficient code for a simple job; be happy that you do not claim credit for it.

  A problem may be that the FileConnection in writeFile is not closed. I would rewrite the mess like this (leaving a part of the diagnostic output):

  private void writeFile(String data, String filePath) {  data = data.trim();  OutputStream out = null;  FileConnection conn = null;  try {     conn = (FileConnection) Connector.open(filePath,Connector.READ_WRITE);    if (!conn.exists()) {      conn.create();    }    OutputStream out = conn.openOutputStream();    // it might be advisable to specify an encoding on the next line.    out.write(data.getBytes());  } catch (Exception io) {    test.setText("Exception Thrown from File " + io);  } finally {    if (out != null) try { out.close(); } catch (IOException ignored) {}    if (fconn != null) try { fconn.close(); } catch (IOException ignored) {}  }}
  
  private String readFile(String filePath) {  String result = null;  InputStream input = null;  FileConnection conn = null;  try {    fconn = (FileConnection) Connector.open(filePath, Connector.READ);    if (fconn.exists()) {      input = fconn.openInputStream();      byte[] bytes = IOUtilities.streamToBytes(input);      // it might be advisable to specify an encoding on the next line.      result = new String(bytes);    } else {      System.out.println("File does not exist");    }  } catch (Exception ioe) {    System.out.println("Error: " + ioe.toString());  } finally {    if (input != null) try { input.close(); } catch (IOException ignored) {}    if (fconn != null) try { fconn.close(); } catch (IOException ignored) {}  }  return result;}
  

• Problems with webcam and microphone on the Satellite with Windows 7

  Hello
  I installed Windows 7 on my Toshiba Satellite and all of a sudden the webcam and the microphone does not work.
  I tried to find the appropriate drivers, but I can't seem to find.

  Could someone please help?

  Best regards
  Teresa

  Hello

  The webcam software is designed by Chicony.
  This model of laptop s independent and, therefore, the use of the webcam software that has been released for other models of laptops may not be a problem.

  I recommend you the driver for Toshiba Satellite L500 series area.
  There you can download the drivers for Win 7 32 bit and 64 bit OS.

  Welcome them

• Mail on El Capitan has problem with answer and respond to the

  I just upgraded from Yosemite to El Capitan (10.11.2) on my MacBook Pro 15 in late 2008, and everything seems to work fine (so far) with this exception.

  When I try to reply to a message, a message window opens with nothing entered.  No to the:, no subject:, nothing in the body of the email from the original.  Just empty in all areas.  When I try to close the window with the red button, it does nothing, so now I have a useless window I can't close.  I can fill in the To and subject to the fields, but when I try to tab or the mouse in the body of the email, the cursor disappears.

  My only way to dispel this is so close to what point mail accidents.  I have attached the crash debugging information below.

  Does anyone know why it would act this way?  I looked at the symptoms and have rebuilt my Inbox, but continues to be the same thing.  Any suggestion would be appreciated.  Clearly, I can't be the only one to experience this.

  Thanks for your help,

  Dana

  Mail Crash problem Details:

  Process:	Mail [5900]
  Path:	/Applications/mail.app/Contents/MacOS/mail
  Identifier:	com Apple.mail
  Version:	9.2 (3112)
  Update information:	Mail-3112000000000000 ~ 1
  Code type:	X 86-64 (native)
  Parent process:	??? [1]
  Responsible:	Mail [5900]
  ID of the user:	70 s

  Date/time:	2015-12-27 15:48:56.189-0800
  OS version:	Mac OS X 10.11.2 (15 C 50)
  Report Version:	11
  Anonymous UUID:	ADF110C8-9D0A-27F4-E6CF-7D03D74A4136

  Sleep/wake UUID:

  13378DBA-6987-4A23-B7D5-6B5725129890

  Time since started awake: 37000 seconds

  Wake time:

  1 200 seconds

  Integrity of system protection: enabled

  Discussion crashed:

  16 send queue: NSOperationQueue 0x7f9a5d870f20: NSOperation 0x7f9a5da03ae0 (QOS: LEGACY)

  Exception type:	EXC_CRASH (SIGABRT)
  Exception codes:	0 x 0000000000000000, 0 x 0000000000000000
  Note the exception:	EXC_CORPSE_NOTIFY

  Request for clarification:

  Reason for termination due to an untrapped exception 'NSInternalInconsistencyException' app,: "this method should be called on the main thread.

  Abort() called

  ending with an exception uncaught of print type

  I use the response and answer all several times a day every day and have not seen an accident as you mention.

  Any chance you can post the log of crash _entire_, rather than just the beginning of it?

• Problems with WRT54GS and EasyLink after the addition of the Comcast Digital phone.

  I had a working network. Cable modem (Comcast), WRT54GS, 2 PCs per (an XP/SP3, a Vista Home Edition SP1), 2 cable PC laptop wireless (an XP/SP3, a Vista Home Edition SP1) and a HP OfficeJet 7210 printer (connected to WRT54GS as a network printer). Everything was going well and worked.

  Then, I added the Comcast Digital phone. Obviously, they went for a new modem cable modem cable with the phone service option. Now I can't print to the wired Vista PC OfficeJet and EasyLink displays "initializing" for too long I'll wait (5 minutes).

  Finally, I must kill EasyLink from the Task Manager. Any help or ideas appreciated!

  I solved the problem. It turns out the new modem cable and problem with EasyLink initialization were 'diversion '.

  The problem turns out to be a classic network problem! The Vista PC wired had a wrong IP address. The wireless PC XP has the printer configured with the name of network instead of the network address (IP, for example).

  When I deleted the printer on the Vista PC and added to the correct address everything worked fine.

  Apparently, the printer got a new IP address of the server on the WRT54GS after installing the new modem. In addition, it seems that Vista doesn't has not report an error of communication to a network printer, but for a direct USB connect.

• Impossible to listen to music and tell at the same time

  The storytelling & music in Windows Movie making

  IAM not able to play the music and narate when I'm wrong.

  IAM not able to play the music and narate when I'm wrong.

  =======================================
  In timeline view... in addition to any audio that may be included
  You can add an extra layer of music on video clips...
  audio / music.

  If you want to add another layer of sound (music, narration, etc...).
  you will have to publish (your project to save movie .wmv format)
  in a folder on your hard disk and then reimport the .wmv file saved
  and drag it on the timeline. (this would create a new project).

  Now you can add another layer of sound to the audio / music.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.