sound recognition after reformatting and installing vista

Similar Questions

• Blue screen after reformatting and installing VISTA HomePremium

  Hello

  I use DELL Inspiron Laptopn and somehow my recovery disk does not work without knowing any reason. So I did an installtion manual disc using my DVD-ROM.  During installation, the Installer application choose what installation disk. I selected 'Advanced Option' and deleted the Partition C: (in primary print) and the MediaDirect (Logical type). Then, I used all the unallocated space to create a new Partition and install windows inside.

  The problem arises when the installation is complete and loading into windows, a blue screen appeared for 0.5 sec and the system has rebooted. I tried to reformat the drive again and reinstall Windows, but the problem persists.

  Would it cause I have deleted the MediaDirect logical drive, which caused the blue screen? Or a full HARD disk format (including recovery drive D :) will help?)

  Pls advise.

  Kind regards

  Lester

  Hello

  This recovery drive was to reinstall vista

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Transfer Vista Business on XP Pro computer.

  I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Hello

  If you use the Vista licence as part of the upgrade to Windows 7 you cannot use the license of Vista anywhere elsewhere

  It is part of the upgrade process

  and also read this on licensing rules;

  If Windows was preinstalled on your computer, Dell, HP, etc., or you bought an OEM/license disk, they are both classified as an OEM license and are not transferable.

  The Windows OEM license is linked to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a retail Windows license, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

• Info CS5 Panel: after archive and install (osx)

  Hello

  After archive and install (10.5.9 Intel osx) I see the file information panel (Photoshop CS5) Virgin... I have to force quit, how could it?

  
  I've used it before to archive and install without problem, shoud repair permissions on flash panels or someother?

  I have the same trouble with Illustrator, Fireworks, and Indesign... only in file-> file Info Panel.

  Best regards. Robert

  Hi Robert,.

  Create a new text file called XMP.cfg (make sure that the extension is cfg and not txt).

  The only text that should be in this file is as below:

  / Library/Application Support/Adobe/XMP/Custom File Info panels.

  Restart the Adobe application and review the file information panel.

• Sector recovery Vista TTG boot after format and installing XP

  First machine is a DELL inspiron 1545
  OK, this is somewhat complicated and I tried a few options.
  I formatted the primary partition and installed XP after which discovered the recovery partition that I cannot now access via CTRL + F11, and a few other combinations I tried.

  I won access to the partition via ubuntu so I know it's all there and intact.

  I tried to use imagex to restore image files of vista on the recovery partition which they are 2 (spl_vista.swm spl_vista2.swm) so I used the order of REF. but I got a CRC error.

  I tried to use imagex to restore another image file in the HDDRE folder. WIM, but that the image has no MBR

  I was able to start the the recovery partation I discovered was a techguys recovery system by changing the active partition through diskpart, but he told me that he could not find the HARD drive, I also tried to boot to a DMS and had the same result.

  any ideas on the means may restore the vista on this machine?

  Hello

  We cannot help you difficulty dell recovery partition

  It's their recovery partition, not Microsoft

  Contact Dell for any additional assistance with their recovery processes

  _______________________________________________

  Try these methods to reinstall vista

  Contact the manufacturer of Dell and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• No sound after reformatting and reinstalling Windows XP.

  Devices are listed and each said that it works correctly, but the computer does not recognize an audio device.  Can't hear the system sounds and cannot use windows media.  What should I do?  Help, please

  The standard answer is: download and install all the drivers on the site of the manufacturer of the web support system, if a system, or from the web site of the manufacturer of the motherboard support.  You want to install all the necessary drivers, updates, tools and software, not only the multimedia device driver.

  Do not depend on the wizard windows update or device to obtain the device driver appropriate multimedia as they are known to be wrong.  (Note: they do a remarkable job, however, to a notoriously difficult task!)

  If you had described your system it original your post, we could have directed you to the web site of the said supported.  Please read: KB555375 - how to ask a question.

  Please VOTE if this has been helpful!  Please, click ON Mark as answer if that answered your question!

• need to change my old hard drive and install vista, a new moved it to the new hard drive

  change from my old hard drive with a new one.  Vista installs in the new hard drive

  How to clean install Vista:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion Touchsmart kept Sound disappears after installation and reinstalling the drivers

  I have a HP Pavilion Touchsmart 14-B132TX Sleekbook. My sound disappeared while I was using it a month ago. I called the HP Hotline and Technical Support told me just uninstall it from the Device Manager and when restarted, automatically installs the driver. What I did.

  The sound came back but still once he disappeared after about 15 minutes of use, so I called tech support again and they gave me links to HP support for drivers to download and install which I did and rebooted the computer and the sound came back again. BUT again, the noise has disappeared. I called tech support and they just do a system restore which I did and the sound came back again. But he disappeared again after all just 7 minutes of use.

  These are the drivers, I installed from the HP Web site: sp60642, sp64082, sp60464 and sp64031. After reinstalling the drivers. I cleaned my laptop with CCleaner and went to HP Support Assistant in the hope of getting a solution, there was a statement here to download the QUALCOMM Atheros driver and I installed again the driver said... The sound has come back after rebooting. AND again, he has disappeared after just using the laptop for about 3 minutes. (it gets worse!.) This laptop is quite new, he just bought 10 months ago. What is going on? Please help me. I use the Windows 8 operating system. PLEASE HELP ME.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• After downloading and installing it install App

  I was downloading an application on my MacBook Air and I waited for a few hours, because it was a big app. After that only he finished 'installation', I went into the applications folder to find the app and it wasn't there. I went back to the App Store and my app showed it was never installed. I tried to install again several times, but it never worked.

  Click on the launch pad icon in your Dock

  See if you can click on resume where you see the app.

  Or click on purchases in the App Store menu, then click on resume.

  Mac App Store: Buy, download and install applications

• After downloading and installing an update of safety about an hour ago, firefox will not start

  After going online this morning, with my firefox browser, a box came say a security update was available and must be downloaded and installed. This has been done without apparent problem. At the end of the update, a note came up saying that the update should come into service after restarting my computer. What I've done. The computer started normally, but after clicking on the firefox icon, the program is not started. My computer is using Windows XP Service Pack 3.

  Hello tncovery, it works when re-download you the full installation file from getfirefox.com and install on top of your current installation?

• Download and install Vista Service Pack 2 - difficulties.

  So, I posted this in another forum, but told me to re-post here with more info... but I have no more.  I'll just re-post I posted in the other and see if someone here can help me.  Thank you!

  I don't get an error downloading the service pack, but my computer restarts.  I know, they say that it might restart several times, but Windows is trying to start mode safe because it has not been closed properly.  I tried three times, three times all automatic updates.  Twice I restarted in safe mode, it and tried to determine what the problem was, but could not.  I know that the error codes and the help of stuff, but I have not write everything, and I don't want to continue to have my computer turned off properly.  Another time I ignored the recommendation in Mode safe and started Windows normally.  He said it was configuration updates, but he stopped even before it began, and the update is still waiting to be downloaded and installed.  If anyone has any information that they think will help, that would be great.  I know I don't have a lot of valuable information, but whatever it is would be helpful.
  Thank you.

  Well, I went to try to reinstall and cull all error messages and download it no matter what, but now Windows will not start.  Nothing has actually been installed, I think not, because the installation process is always interrupted.  I ran the fixer thing turning and I tried to restore to an earlier point, but he could not know what the problem was, and he could not restore the computer to an earlier date.  I was planning to do a while system restore and losing all my files, I don't have many of them.  But I don't want to have to go through the motions again downloaded and installed massive amounts of updates needed.  Does anyone have advice so that maybe I won't have to do?  Thank you.

  Thank you, guys.  I know that I don't give a lot of information...

  1. How do I uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  2 learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  3. If necessary-
  Startup Repair: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-AU/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  TaurArian [MVP] 2005-2010 - Update Services

• Accidentally, I installed the upgrade to Windows 7 without the first installation of Vista on a new hard drive. How can I remove the upgrade and install Vista?

  I replaced the failed hard drive and then inadvertently loaded upgraded Windows 7 before I reinstalled Vista.  Now I can't understand how to remove the upgrade to Windows 7, so I can install Vista.

  Boot from the Windows Vista DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  or you can try this for Windows 7:

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

• Do I have to disable my CC account to reformat and install another OS on my hard drive?

  I'm want to reformat my hard drive and install Windows 7 Pro.  How can I make sure that Adobe dosen't think I have on two computers?

  Yes, disabling is essential before you reformat the hard disk, otherwise it will be counted as one activate both of which is allowed.

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Concerning

  Baudier