SP1 failed C000009A 118983 - toast of system operation

Similar Questions

• A process or thread crucial to system operation has unexpectedly left or came to an end.

  So, if you look at the other question, I asked, you will see that I had a few problems under Windows 7. Now, I'm having almost exactly the same problem after return to windows Vista.

  Twice now, after that immediately turned on the computer and the starting windows, I got the system slows down suddenly and freeze. Previously, in windows 7, this has led to many problems, and ultimately the system was unresponsive and unusable until I reinstalled the operating system. Under vista, the computer actually seems to try to solve the problem, and I am fairing slightly better.

  Earlier, I got a blue screen with the 0x00000F4 error code (I couldn't have the correct amount of 0) and the message that is indicated in the title. Once the computer is restarted, it works very well, and I found it in under the window newspapers/system event viewer:

  The structure of the file system on the volume C: has now been repaired.

  Event ID: 130 Source: Ntfs
  The event data:

  VolumeIdLength 2

  VolumeId C:

  RepairDetail 25008: Startup Repair on 13/04/2010 at 17:45:14:941 26084: remove an entry from index to index the file 0x2c000000004b8a 0x12000000007fa7. 27094: an index entry in the index to the file 0x12000000007fa7 point unused 0x2c000000004b8a. 25009: repair end on 13/04/2010 at 17:45:14:941

  RepairDataLength 136

  RepairData 8A4B000000002C00BB00170006000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  There is also another warning of the same nature, which seems to be a repair on a different part of the C: drive.
  In addition to this, I see warnings that the following packages (which appear to be updates security) do not apply to my system. The only thing I installed in this time was windbg, so these errors can be that, but I do not. The packages are:
  
  KB979309 and KB978601 (there are four separate warnings for this package)
  In addition, I tried to analyze the minidump created by crushing with windbg. Here's what I got, but I don't know if I was doing it right or not.
  CRITICAL_OBJECT_TERMINATION (f4)

  A process or thread crucial to system operation has unexpectedly left or been

  terminated.

  Several processes and threads are necessary to the functioning of the

  System; When they are finished (for some reason any), the system may not

  function longer.

  Arguments:

  Arg1: 0000000000000003, process

  Arg2: fffffa8007998c10, object of ends

  Arg3: fffffa8007998e48, name of the process image file

  Arg4: fffff80001ee1af0, explanatory message (ascii)

  Debugging information:

  ------------------

  PROCESS_OBJECT: fffffa8007998c10

  Nom_image: csrss.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  MODULE_NAME: csrss

  FAULTING_MODULE: 0000000000000000

  Nom_processus: csrss.exe

  EXCEPTION_CODE: (Win32) 0x875b7f0 (141932528).

  BUGCHECK_STR: 0xF4_875B7F0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  CURRENT_IRQL: 0

  STACK_TEXT:

  "fffffa60 '043351-8 fffff800' 01f5d1e3: 00000000' 00000000'00000003 fffffa80 ' 07998 000000f4 c 10 fffffa80 ' 07998e48: nt! KeBugCheckEx

  "fffffa60 '043351b 0 fffff800' 01e762c8: fffffa80 '0875b7f0 fffffa80' 0875b7f0 fffffa60 ' 04335 c 20 fffffa60 ' 04335a 40: nt! PspCatchCriticalBreak + 0 x 93

  fffffa60 '043351f0 fffff800' 01eaa190: fffffa80 '0875b7f0 00000000' 00000008 fffffa60'04335 c 20 00000000'00000008: nt! : NNGAKEGL: 'string' + 0x110f6

  "fffffa60 ' 04335240 fffff800' 01c5def3: fffffa80 ' 07998 c 10 fffffa80 ' 0875b7f0 fffffa60 '04335320 fffffa60' 04335c 20: nt! NtTerminateProcess + 0xd8

  fffffa60 '043352-0 fffff800' 01c5e400: fffff800' fffffa60 '04335b 78 fffffa60' 01cbe2ed fffffa60'04335 04335ca 0 c 20: nt! KiSystemServiceCopyEnd + 0x13

  fffffa60 ' 04335438 fffff800' 01cbe2ed: fffffa60 '04335 b 78 fffffa60' fffffa60'04335 04335 ca 0 c 20 00000000'003913 0 d: nt! KiServiceLinkage

  fffffa60 ' 04335440 fffff800' 01c5e2a9: fffffa60'04335 b 78 00000000' 0001cb88 fffffa60'04335 20 00000000'003919 d 8 c: nt! : FNODOBFM: 'string' + 0x2935c

  fffffa60 '04335-40 fffff800' 01c5d0a5: 00000000'00000000 00000000' 003cf8a0 00000000'00000001 00000000' 0001cb88: nt! KiExceptionDispatch + 0xa9

  fffffa60'04335 c 20 00000000' 77ba347e: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x1e5

  00000000' 003912f0 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x77ba347e

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0xF4_875B7F0_IMAGE_csrss.exe

  BUCKET_ID: X64_0xF4_875B7F0_IMAGE_csrss.exe

  Follow-up: MachineOwner
  Thanks for any help!

  Good job!  I am pleased that chkdsk option included in my post the primary problem solved oiriginal (if only temporarily).  It doesn't sound like your hard drive may be dying (or close very dead).  We should do a complete diagnostic of her test to see what it shows.

  To test your hard drive, check the manufacturer and then get the diagnostic utility of:http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, there's probably nothing wrong with it that can't hold off for a while (but the corruption on the hard disk is a sign that there is something wrong with the hard drive, even if she meets this criterion).

  Csrss.exe crash almost certainly has not caused the problems of corruption on your hard drive - what is much more likely a hardware problem (but the above will be)- and it is more likely that corruption caused the crash.

  I see no harm in installing the fix - although I do not know it will not solve the problem (especially if you aren't really using console applications or it occurs not only when you close).  Yes, it seems to apply to your situation in a certain way and can solve this problem, but I really think that the underlying issue is the hard drive itself.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Password verification failed fatal error... system halted CNU94552ZD

  Password verification failed fatal error... system halted CNU94552ZD

  I BOUGHT THIS LAPTOP A TOSHIBA MINI 110 AND NOW ITS NOTHING MORE THAN A PAPER WEIGHT

  Help, please

  Password verification failed fatal error... system halted CNU94552ZD

  @jdaniels76

  Enter: e9lovqq70t (3rd character is a tiny and 9 L is equal to zero)

  Kind regards

  DP - K

• password verification failed fatal error... system stopped

  I started my mini hp computer and I had a message saying password verification failed fatal error... system halted CNU84938ZV and I did not no how to fix it please help

  Hello

  You can see the layout of a QWERTY keyboard key here.

  If that's what you use, then try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Plug the power adapter (leave the battery at the moment) and start Notepad.

  Enter: e9luvofu06 (note that the 3rd character is a lowercase L, the 6th is a tiny O and 9 is equal to zero )

  Kind regards

  DP - K

• PCG 4A1L LAPTOP COMPUTER WHICH HAVE THE SYSTEM OPERATION

  Ideas:

  • PCG 4A1L LAPTOP COMPUTER WHICH HAVE THE SYSTEM OPERATION
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I'm sorry to hear that. In a little more detail would be helpful. Crystal Ball (tm) says when you turn on the computer you get an error message that says somethng like "cannot find operating system". If Crystal Ball (tm) is correct, your hard drive is dead or your motherboard is a failure. Pull the drive and put it in a disk enclosure or use an adapter and test it on a working machine.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  If Crystal Ball (tm) was cloudy, please specify exactly what is happening with your computer. MS - MVP - Elephant Boy computers - don't panic!

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• BlueScreen: "a process or thread crucial to system operation has unexpectedly released or ended."

  My computer has a blue occurning screen occasionally (3 times in the last month 2). It reads "a process or thread crucial to system operation has unexpectedly left or came to an end...." "STOP: 0x000000F4 (0xFFFFFA80074DF450, 0xFFFFFA80074DF688, 0 x 0000000000000003, 0xFFFFF80002126CF0) ' after the restart there is no problem (for now) until the next Bluescreen.

  Hello Alkallanar,

  Check the settings of the memory images:

  http://support.Microsoft.com/kb/254649

  Let us know.

  Best regards

  Matthew_Ha

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Download an update failed liked adversely affect my system (KB3135983)

  I am ignorant as to the effect of loading (or attempt thereof), an update has failed will have on my system.  Thoughts: has it been replaced?  An another setting a day already that an obsolete (was that redundant?), etc.?  If the subject was the update in question is KB3135983.

  Thank you.

  Charles T

  Hello Charles,

  We are here to help.

  You can see this link for more information on KB3135983 and the steps of troubleshooting provided.

  Let us know how it goes.

  Kind regards.

• Problem loading qml. Toast of system is not a type

  Button {
                  id: login_button
                  horizontalAlignment: HorizontalAlignment.Center
                  text: "Login"
                  objectName: "login_button"
  
                  onClicked: {
                      myQmlDialog.show();
                  }
                  attachedObjects: [
                      SystemToast {
                          id: myQmlToast
                          body: "No network connectivity!"
                          onFinished: {
                          }
                      },
                      SystemDialog {
                          id: myQmlDialog
                          onFinished: {
                              if (myQmlDialog.result ==   SystemUiResult.CancelButtonSelection) myQmlToast.show();
                          }
                      }
                  ]
  }
  

  I'm showing a toast of qml. I enclose the code that I use in qml. And this is the error: loading qml overview. Toast of system is not a type.

  Any help would be appreciated. Thank you

  Welcome on the support forums.

  Unfortunately the preview no longer works if you use custom types. I hope he'll get fixed sometime, until then you can copy your UI code to another qml to adjust the appearance (I do it like that).

• Migration oracle db user of an operating system to any other user of system operating in an environment of rhel 6 with oracle 11.2.0.3.0

  Hi all

  Migration of oracle db user of an operating system to any other user of system operating in an environment of rhel 6 with oracle 11.2.0.3.0.

  Suppose I have a database running with os user user1

  I have another user user2 where I want the database runs and not on User1

  Please let me know how to achieve this goal,

  Thank you.

  Have you looked on the MOS for this?

  I thought to do exactly this, but ultimately I didn't actually accomplish. Despite the fact, it may be an interesting feature...

  Something like this:

  S ' ensure that two users are members of the same groups

  -Database stop

  -As the former owner, change the ownership of all files in Oracle Home, inventory of the Oracle and all data files, to the new. On Linux/Unix, only the owner (and root) can change the ownership of files, so all files/directories not belonging is not to the former user, will obtain authorization refuses, legitimately so. The new user for example cannot 'take' the files, because they are not his. Only the old can 'give' files. Of course, root can do as well, if you have this permission.

  -Configure the new user to set up the environment correctly (ORACLE_HOME,..)

  -Start of the database

  -Do NOT remove the old user of the system, but do not give him a different password

  That's what I think

• Failed: Could not find the system volume, reconfiguration is not possible

  Hi all

  When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.

  (FAILED: could not find the system volume, reconfiguration is not possible. ) )

  I use VMware vCenter Converter Standalone 6.1.1

  Anyone encountered this problem and found a solution?

  The log file is attached.

  Thank you very much!

  Terence

  Your problem is:

  2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1

  Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1

  Also, keep in mind that mount point C:\backup\Ext\ is not copied.

  HTH

• Vista - FAILED: could not find the system volume, reconfiguration is not possible.

  Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.

  Thanks in advance, Dave

  Make sure your username is Administrator and UAC disabled on your Vista machine. HTH