SPA 942 - "DUNS check."

Similar Questions

• Several screenshots on Tecra A7 (Intel 945GM)

  I have problems with my Tecra A7 to display using a Mobile Intel 945GM chip. At one point I started having multiple copies of my office on my screen - two down, two entering the bottom overall, with the top of the fifth and sixth copy.

  Initially it was just for Toshiba and A? Â? Recovery of Windows? Â? screen, but eventually he remained this way all the time. Windows works normally, with just four copies really small office. An attached external monitor works fine. I tried box full screen (without borders) in the graphics from Intel, as well as all the shortcut keys Manager I've seen the list - nothing works.

  Looks like the screen of your laptop has problems connecting or don't know, maybe there is something wrong with the display.

  Because, as you have already tested an external monitor with your machine, I doubt a driver update or relocation would help here.
  However, you can try it, but to get to know what is exactly the problem, go to a SPA and let check them your laptop.

• UC520 with SPA942

  Hello

  Can someone help me with this:

  I have UC520 and lots of SPA 942 phones. How to grow? And is it possible at all?

  -

  Best regards

  Damir

  Hi Damir,

  The SPA900 phones are only compatible with SIP, so you should configure the SIP on the CPU in order to record the SPA942 phones.

  Please refer to this post for some sample SIP configurations: https://supportforums.cisco.com/message/3330441

  Thank you

  -john

• Dune 200 installation gives an error saying that the sound is not compatible and to check if 32 or 64 bit

  Installation of Windows 95/98 games, 32-Bit on a 64-bit Windows 7.

  Features of the laptop:

  Intel Core i3 - 370 M robot
  15.6 HD LED LCD
  ATI Mobility Radeon HD 5470 graphics card
  4 GB of DDR3 memory
  1 T HARD DRIVE
  DVD-Super Multi DL Drive
  Windows 7, 64-bit

  I have the files, install an old game called Dune 2000, but when I try to install it says not compatible, Windows
  Check, it takes weather 32-bit or 64-bit, but with common sense, there are 32 Bit, right? I tried the windows
  compatibility and still nothing. I am trying to load for the hard drive. Also tried to load as an admin. Any help?

  95-98 games often have 16-bit installers. It is the main
  lies of the incompatibility.
  Sometimes, you can copy a game from a 32-bit to computer
  64 bit machines and it will be run.
  In this case you also need a noCD patch
  http://MegaGames.com/games/dune-2000#fix
  Other games totally incompatible options-

  BACK BOX - the link below is for an application that did BACK BOX a little more
  user friendly-
  D - Fend Reloaded: overview

  Or a virtual Macine - there are others but-

  | MG | Download VirtualBox 4.1.10.76836

  Overview of VirtualBox

  VMware Player: Run Windows 7, Google Chrome OS - free download for a virtual PC

  See also GOG for more oldies who install with BACK box automatically.
  http://www.Gog.com

  .

• Received a call from a guy from Indian accent claiming he calls Network Services to businesses (BNS - one company in India after checking)

  I am one of those calls on Friday and this morning of a number in California (818) 942-3348 and (510) 576-0000 (of course no one responds to these requests).  Today, the guy said that my computer is virus spread and many fraudulent activities going on under my license!  I was not cooperative to provide any information or do what he was asking me (to connect to my computer) and when I did a few question that where he calls and... He started to threaten me. Then he said that I should cancel my license from Microsoft. When I asked what is my license number, he said 888DCA60 and when I told her let me I'll check it with Microsoft and I'll decide what he said 'be sure that your computer will be shut down after completing the call! "

  I really wonder where these people have access to our information and why there is no action to these abusive entities.

  Hello

  We don't work for or talking to Microsoft.

  We are mainly volunteers here.

  What experienced you is going 1000s of times a day around the world.

  That's the advice we give posters who report this problem here.

  @@@@@@@@@@@@@@@@@@@@@@@

  It's a scam.

  We have all the errors and warnings in our Event Viewer

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Report phone scams

  • Help Microsoft to stop cybercriminals in reporting of theinformation about your scam phone.

  • In the United States, use the form of complaint to FTC Assistant.

  • In Canada, the Canadian Centre for fight against fraud can support.

  • In the United Kingdom, you can report the fraud as well as the unsolicited calls.

  @@@@@@@@@@@@@@@@@@@@@@

  Hope that helps.

  See you soon.

• can eny help every time I turn on my pc, on that I get a blue screen and a message check disk on C: but he did not need compleat finish get access to drive C

  When the pc is completely booted I try and do a defrag and it will tell a disk check is scheduled to run on the C drive and run a chkdsk/f., I check't calendar and nothing is there to be dun the other thing I foud is two disks are fat32 (drive F G and slaves) but the C drive is ntfs? How is this has happen'd I can change in fat32 or the other and not lose data? and how can I stop this? and when I road RUN and type chkdsk/f. it due not reconice it any idea of each?

  Hello
  Here's how one gives info complete http://www.updatexp.com/windows-xp-chkdsk.html if this post can help solve your problem, please click the mark as answer check on this page, that it helps people who need quick access to answers THANKS AND GOOD LUCK

• help with SPA 3102 (question graphcal)

  HI guys here is my situation (I draw so it would be easier for future reference):

  

  I want to pick up A phone and dial the Ext 101 101, 102 for Ext 102 and so on.
  also, I want to put routed my call for location 2 location 1 for example transferring calls to 104.

  any help would be really appreciated even a starting point as for example the configuration of spa to route my call not NAT, so it can connect to the other.

  castro69 wrote:
  also, I want to put routed my call for location 2 location 1 for example transferring calls to 104.
  any help would be really appreciated even a starting point as for example the configuration of spa to route my call not NAT, so it can connect to the other.

  I guess that's an analog PBX, otherwise you wouldn't need the SPA3102 through the internet.

  For communications between the SPA3102, I would use direct ip call, using the external ip address and the sip port numbers.  Think that the SPA3102 is two separate cards inside the box where treat you everyone with its sip port number added to the external ip address common.

  I would setup port sip distinctive numbers on each of the baths to keep things straight.  You have a number of separate port for tabs of line 1 and line PSTN.  You will need to send these to the SPA3102 adapter port numbers in their respective routers or firewall of the router will reject incoming packets on the internet.  I would also convey the port range rtp for voice, flow packs.
  On each tab of the line 1 and RTC, you define NAT Mapping Enable: YES, not record, make call without Reg Yes, years call without Reg No. I put your external ip address on the Sip tab under EXT IP.  This will tell the SPA3102 to use this address in the sip signaling. I assume you are using static external ip addresses.   On each tab of the line 1 you would activate IP Dial Yes.

  The analog PBX is connected to the FXO port on one of the Spa.  You should check the voltage level hung up and won and then set the line parameter usage on the RTC of the SPA line tab to halfway between the two readings.  You can read the levels of tension on the PSTN line tab.  Calls to the PBX of the PSTN line tab will go through the voip to PSTN gateway.  I set up the catwalk with http authentication and configure a user name and password.

  Details are starting to become quite complicated.  I'd get running through steps.  Get a job step before moving on to the next step.

  The 1st step would be to get A phone call/receive calls to a PBX.  You can configure the line 1 for FXS phone attached A to use port location PSTN 2 as the proxy using http authentication, and you can then dial the extensions you want to call.  Location 1 SPA3102 will send a guest of the sip Protocol to the tab location 2 SPA3102 from pstn line and the SPA3102 will dial the number on the FXO port to the PBX.

  For calls coming from the other direction of a PBX to slot 2 SPA3102 the only place where you can connect a voip call is in the SPA3102 numbering plan.  If you want to call only phone that is easy, install you just dialers-messengers automatic telephone in the pstn-to-voip dial plan.

  I'm not clear about what you want to do with phone B I take is Extension 104.

  I like your designs.  Can save a lot of words.

• SPA-3102-backup/restore settings?

  Hello

  Is there a way to backup/restore the settings to a file in the SPA-3102 router?

  ASE

  There are several ways to save the settings of the SPA3102 according to some forums - check links ff

  http://forums.whirlpool.NET.au/Forum-replies-archive.cfm/756454.html

  http://Forum.Voxilla.com/Linksys-Sipura-VoIP-support-forum/SPA3102-compiler-configuration-backup-Mon...

• Problem with Instalation 900 SPA

  Hi all
  I am about to install a new VOIP system in our offices.  We are only a small office, but reasonably busy and I only need three to five extensions.  I already have the material and I'm reasonably confident (famous last words!) by installing the system with a SIP line and connected to a normal telephone line for the downturn.  I'm NOT sure about a field.  Prime material

  SPA9000
  SPA3102
  962/942 SPA phones

  OK now my desktop system consists of a server with SBS2003 with NIC TWO one for LAN and WAN cards.  Workstations and other elements are connected by ethernet to a D Link switch which is connected to the NIC1 and the NIC 2 connects to a telephone line Draytek router/ADSL broadband.  Internet access is of course provided to workstations using DHCP.  Everything works well at the present time.

  Now that I do not understand is the SPA 9000 connectivity and the SPA3102 which has an FXO port to the telephone line.  As I don't have only one telephone line how to connect theat line to the router AND the SPA3102.

  I hope that explains my question

  Thanks for any help

  You will connect the WAN port on the SPA9000 to the switch and then together "Network Interface Proxy" WAN under the label to join automatically, in which case your SBS2003 has no problem handling of multicast SIP, IP of SPA phones. You must manually register the SPA3102 to the SPA9000, you set a proxy which is the IP address of the SPA9000, you can verify that proxy address by clicking on one of the IP phones that automatically, then you put a User ID user defined. You can test if it works by calling locally and User ID on one of the IP phones.

• Need help installing SPA962 - check DNS?

  Establishing a SPA962 behind a 7402V billion.

  Static IP is fine, can ping OK phone, get the advanced config login screen in Internet Explorer, BUT as soon as I enter my VSP on ext 1,2 and 3 phone is stuck on a screen "check DNS".

  I have the settings from my ISP in DNS 1 and 2, but some how they don't seem to work.

  Port railroads RTP and SIP for the SPA ports.

  Any advice on how to get my installation work would be appreciated.

  The "check DNS" was the question, which is now resolved. I changed my billion router to select the DNS address automatically, then the DNS addresses is entered in the phone of the SPA of my ISP DNS, selected "DHCP, manual" in the box, enter a hostname for my system, put my routers IP address in the domain box dah and the ti just clicked on the spot.

  I spent my VSP in the post and they recorded immediately.

• Original SIPURA SPA 3000 help

  Five years ago, that I bought, directly from SIPURA, a new SPA-3000. I've never used but now I want to set up, but I want to make sure it has the latest firmware. I looked at the Linksys site (because any attempt to access www.sipura.com is redirected to Linksys) and found the firmware for the SPA-3000. Can someone tell me if this is the same unit as mine or changed from the original and the firmware does not work on mine?

  I tried to contact Linksys technical support, but their automated system tells me that I need to contact the dealer, who ironically is Linksys, since they bought Sipura. When I get to a real person that they just repeat that I have to contact the dealer of origin, they won't listen to me telling them that they are now the dealer.
  Can someone help and tell me what is the latest version of the software for this device and where I can download it? The configuration GUI displays the following information:
  Software version: 2.0.13 (GWg)
  Hardware Version: 2.0.1 (7067)

  Thank you

  Hello bsdaiwa, Yes this is the same unit. SPA-3000 has never really produced by Linksys, they later produced SPA-3102 units. Anyway, regardless of the producer of the unit (SPA or Linksys), they are able to use the same firmware.

  I myself have 2 pieces of SPA-1001 units, the 'old' box of Sipura, Linksys 'new' box, each of them having different revision HW and the two hapily run the same firmware 3.1.19 (SE) Linksys pages.

  Also, the SPA-xxxx units are protected from the flash of the incompatible firmware (for example from a different camera model), unit load the firmware first to the RAM, then check the "signature" FW, and that if it is the corresponding FW "signature" then unit flashes it it's rom flash and reboot.

• Configuration of slow appeal for all SPA on UC560 phones

  Hello world

  Our client (and I) complains about slow call setup when you make outgoing calls from phones on UC560-BIS-K9 SPA.

  The user type the called number and push button dialing on the phone and it takes about 10 seconds for the call to go to SIP trunk. I checked with"ccsip debug messages"and it's true.  10 seconds after pressing the dial button I can see Debugging has started and the call out via sip trunk instantly.

  Telephony-service we created interdigit timeout to 5 seconds, still no improvement.

  It is the configuration of counterparts:

  !

  Dial-peer voice voip 500

  Description * PROVIDER - Peer *.

  translation-profile incoming IN_FROM_PROVIDER

  translation-profile outgoing OUT_TO_PROVIDER

  destination-model 0 t

  session protocol sipv2

  session target sip-Server

  session udp transport

  incoming called-number

  codec voice-class 1

  profiles of sip voice-class 1

  DTMF-relay rtp - nte

  rate of Fax 9600

  Fax g711alaw transmission protocol

  No vad

  no additional service moved temporarily sip

  !

  Even when you use abbreviated, the user does not know if the call was launched.  After pressing the speed dial user must wait 10 seconds (with empty phone screen) for phone show the call on the phone and only after 10 seconds, the user gets information that the call is being tone and having the status of the call display - it's even more painful for them.

  I also close the BRI ports, still no progress.

  We hope to get some feedback on it,

  Kind regards!

  You must configure a perfect match for the numbers dialed, not using T destination-model.

• SPA 3201 - problem with incoming calls

  Hello

  I installed a new SPA 3102 connected to a mini Server asterisk; catches of phone line to connect to the existing line of the Earth and the phone.
  The unit has current firmware, and the one and only ethernet cable taken in the WAN port - these two steps make a working direction. I can dial a number on the phone, the call goes through the asterisk and goes out to the PSTN.
  The other way, however, does not work: I get syslog entries that the call is detected, but the device doesn't send what anyone on the server (as checked with wireshark)
  The dial plan is
  (S0<:1234>)
  but I also tried
  (S0<>[email protected] / * />)
  and some variations more

  This is syslog entries:

  FXO:start CNDD
  Number of the caller analysis = callingnumber
  -Caller ID:
  -Name = (null)
  -Number distance = callingnumber
  -Dialable number = (null)
  -No reason number = (null)
  FXO:CNDD = name, number is callingnumber
  FXO:stop CNDD
  Phone = FXO:CNDD name = callingnumber
  Your RTC AUD:Stop
  FXO: on the hook
  Your RTC AUD:Stop
  the next sequence is repeated several times, probably as long as the line is actually ringing
  FXO:start CNDD
  Your RTC AUD:Stop
  FXO: on the hook
  Your RTC AUD:Stop
  FXO:stop CNDD

  Where would I look next?

  I found a tip in an ongoing discussion, and in fact this has solved the problem: "PSTN ring timeout" must be longer than the time to ring + break from the ring, and "Time of response to PSTN" must be short enough

  Unfortunately, if incomplete description of configuration. There are so many dial plans to set, but it has not specified that have configured it.

  Please read before RTC call the SPA3102 to VOIP. I hope this will help you.

• 122 SPA - I can't config utility Web-based

  Hi, I am trying configure SPA 122. I already get IP using IVR and try to run the Web based configuration utility. But it does not work. Nothing happens if I type the IP in the web browser window and press ENTER. What you suggest to do? How to check if this phone adapter worksl?

  You want to in this web site from a computer connected to the local network (labeled Ethernet) or WAN (labelled Internet)?  You can only web inside from a computer connected to the LAN port.

  Via the WAN connectivity must be enabled everything first before it will work.

  If you connect your computer to the "Ethernet" port on the anti-terrorism Act and set it up to automatically obtain an IP address, it should get an IP of the ATA in the 192.168.15.x subnet and you should be able to the web in the device to 192.168.15.1 (NOTE - no 191.168.15.1 that you listed above).

  -Adam

• Nested exception on the SOAP webservice in Orchestrator calls - org.xml.sax.SAXException: element not valid in ch.dunes.vso.webservice.WorkflowToken - businessState?

  I created a java client program to call Orchestrator webservice for the execution of a workflow.

  When executing my code, the workflow is executed in Orchestrator with new token generated workflow.

  But my client side receives SAX exception. All trace is as below:

  WARNING: Could not find the required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.

  20 sep 2013 13:02:23 org.apache.axis.client.Call invoke

  SEVERE: Exception:

  • org.xml.sax.SAXException: element not valid in ch.dunes.vso.webservice.WorkflowToken - businessState

  at org.apache.axis.encoding.ser.BeanDeserializer.onStartChild(BeanDeserializer.java:258)

  at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)

  at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:165)

  at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:1141)

  at org.apache.axis.message.RPCElement.deserialize(RPCElement.java:236)

  at org.apache.axis.message.RPCElement.getParams(RPCElement.java:384)

  at org.apache.axis.client.Call.invoke(Call.java:2467)

  at org.apache.axis.client.Call.invoke(Call.java:2366)

  at org.apache.axis.client.Call.invoke(Call.java:1812)

  at ch.dunes.vso.webservice.WebserviceSoapBindingStub.executeWorkflow(WebserviceSoapBindingStub.java:744)

  at ch.dunes.vso.webservice.VSOWebControlProxy.executeWorkflow(VSOWebControlProxy.java:95)

  at com.vmware.client.LaunchWorkflow.main (unknown Source)

  ; nested exception is:

  org.xml.sax.SAXException: invalid element in ch.dunes.vso.webservice.WorkflowToken - businessState [Ljava.lang.StackTraceElement;@793d7a

  Any suggestions?

  You can check the version of the WSDL file that you use in your java application? Looks like it's outdated, perhaps to an old version 4.1