SPA 3201 - problem with incoming calls

Similar Questions

• Problems with incoming calls not being recognized

  I have a motorazr2 V9m.

  Can I use any phone and call my motorazr2 V9m.

  The call will not be displayed on my motorazr2 V9m.

  On the phone, I'm calling from the call will ring until voice mail rises.

  A voice message on the motorazr2 V9m notification will pop up sometimes immediately or later.

  The voicemail notification pop up of time varies. Sometimes it will not show up until you try to make an outgoing call.

  I can call the other phone several times and the motorazr2 V9m will not display a call.

  I'll try 5 or 6 times before the motorazr2 V9m will show and ringing an incoming call.

  I tried this in many places with the same result.

  Any suggestions?

  Thank you

  Looks like a reset did the trick.

• Problem with incoming calls!

  Can anyone help?
  When my phone rings with an incoming call, my screen remains white. I do not see who is calling you, nor I can answer the call!

  I've restored my phone to factory settings. I followed the process of repair with PC Companion & still does not work!

  Help, please!

  Hi, go to settings - Apps & forehand, then scroll down to IncallUI & select...

• No voice with incoming calls PAP2T

  I bought a LinkSys PAP2T unlocked last year that worked beautifully until a few days ago. Outgoing calls work fine, but I now have problems with incoming calls only.

  When I receive an incoming call, the phone rings, but when I pick it up, I can't hear anything and cannot the caller on the other end. After a few seconds, my phone disconnects and begins to beep as if the line is busy. This occurs regardless of who calls me and whther they use a VoIP device or a normal PSTN phone. I have not changed the settings on the router (a Belkin) or the PAP2T, he simply stopped working a few days ago! I have a connection 10MB Virgin Media broadband service for my VoIP provider is Draytel that have verified the account and settings and says it works very well on their test kit.

  Since then, I tried just using line 2 and the deactivation of line 1 to do a hard reset of the PAP2T and updated the firmware to the latest version. Even tried to change the analog phone connected, but I still have the problem.

  Does anyone have any ideas as to why it suddenly stopped working with anything has been changed and what I might be able to do to fix? The PAP2T is still the title of the 12 month warranty period then maybe she developed a fault?

  Thank you very much in advance for all those who can help you.

  Cheers, Vic

  For me it looks like the problem of RTP streams - probably, it does not pass the firewall / nat on the path between SIP provider and you.

  This may have is that your Belkin router/NAT, or on internet ISP router/NAT enabled SIP ALG (Application Layer Gateway).

  If this is the case, you will need to disable SIP ALG on your router or ask your ISP internet to disable on the firewall router.

  Another question may have been if you (accidentally) changed the port forwarding on your Belkin router, or the PAP2T local LAN IP address changed and port forwarding is no longer works.

  So my proposals to check:

  -check and DISABLE SIP ALG on your Belkin (if the router has this feature)

  -check the port forwarding on your router Belkin... IF you set up port forwarding for 5060/61 you MUST set the same for RTP ports (16384-16483)

  -If you don't have port forwarding on your Belkin, try before installation of 5060-5061 AND 16384-16483 *.

  * (If this is too many ports, set the RTP on PAP2T portrange to 16384-16394 for example and then forward only go)

  -If neither of above of aid, change your SIP Line1 of 5060 for port we will tell 6070 and RTP ports to the beach we'll tell 17300-17310

  -Finally, you can do it on your side is to remove all the port forwarding and put the PAP2T to your router Belkin DMZ settings.

• I have an Officejet 4500 printer all-in-one. I have problems with incoming faxes.

  I have an officejet 4500 all-in-one printer.  I have problems with incoming faxes.  It starts to connect, but then prints a sheet indicating image Fax Send report is set to off.  How can I enable this so that I can receive faxes.  Thank you.

  The "image on fax send report is set to off" is just for the image on the fax. This is will you won't fax. Check the connections.

  You should have the telephone line from 1 LINE of fax directly to the WALL SOCKET.
  You should have the phone plugged into the LINE 2 of the fax machine.

  Access your fax on the printer settings.
  Go to the ADVANCED SETTINGS.
  Enable error CORRECTION MODE (ECM) - OFF
  You turn Fax speed to-SLOW

  After that, run your FAX TEST and see the results.

• TC7.2.1 problems with SIP calls

  Hi, we had the following problem with sip calls:

  Here is the log:

  Version of the VCS software: Platform X7.2.3 | X8.2.1 Labor

  ______________________________________________________________________________

  Call with TC 7.2.1 does not
  ______________________________________________________________________________

  SIPMSG:
  | INVITE sip: [email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP xx.xxx.60.133:57597; branch = z9hG4bK38f566387dbd719702049ddcb2590ebe.1; rport
  Call ID: 4832bd6a60d9d3d43670c55c573667ec
  CSeq: INVITE 101
  Contact: sip: [email protected] / * /: 57597; gr = urn: uuid:6 c 856033-4cbd - 5 b 15 - bb13 - 0715c4a694cd, ob>
  From: "201101102_C40_ServiceDesk" sip: [email protected] / * />; tag = d25377890df67530
  To: sip: [email protected] / * />
  Max-Forwards: 70
  Directions: sip:xx.xxx.1.51; lr>
  Allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
  User-Agent: TANDBERG/521 (TC7.2.1.cb31c3d)
  "Proxy-Authorization: Digest ="bb1d830b2d64949caaadfb732cd7ca77414a991699854e8971970a68fe06"nonce, realm ="tplabvcsc01.xyz.com", qop = auth, opaque = 'AwAAAMSaxlh37 + YNQULdXHDdMkXYHVQ1', user name =" ", uri ="sip:xyz.com", answer is"51f225da16a3ac710e86c1b1b5815438", algorithm = MD5, nc = 00000008 cnonce ="21c839c8313e8f7f7477786cb40c5ee6. "
  Supported: replaces, timer, 100rel, gruu, way, way out
  Session time-out: 1800
  Content-Type: application/sdp
  Content-Length: 2842
   
  v = 0
  o = xx.xxx.60.133 IN IP4 6 2 tandberg
  s = -.
  c = IN IP4 xx.xxx.60.133
  b = AS:6000
  t = 0 0
  m = audio 16424 RTP/AVP 107 108 109 110 104 105 9 15 18 8 0 101
  b = TIAS: 128000
  a = rtpmap:107 m4as-LATM/90000
  a = fmtp:107 profile-level-id = 25; object = 23; bitrate = 128000
  a = rtpmap:108 m4as-LATM/90000
  a = fmtp:108 profile-level-id = 24; object = 23; bitrate = 64000
  a = rtpmap:109 m4as-LATM/90000
  a = fmtp:109 profile-level-id = 24; object = 23; bitrate = 56000
  a = rtpmap:110 m4as-LATM/90000
  a = fmtp:110 profile-level-id = 24; object = 23; bitrate = 48000
  a = rtpmap:104 G7221/16000
  a bitrate = 32000 fmtp:104 =
  a = rtpmap:105 G7221/16000
  a = fmtp:105 bitrate = 24000
  a = rtpmap:9 G722/8000
  a = rtpmap:15 G728/8000
  a G729/8000 rtpmap:18 =
  a = annex b fmtp:18 = yes
  a = rtpmap:8 PCMA/8000
  a = rtpmap:0 PCMU/8000
  a rtpmap:101 telephone-event/8000 =
  a = fmtp:101 0-15
  a = sendrecv
  m = video 16426 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:126
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 11
  a = answer: full
  a = content: hand
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = application 28300 UDP/BFCP
  a = the installer: actpass
  a = confid:1
  a = userid:6
  a = floorid:2 mstrm:12
  a = floorctrl:c - s
  a = connection: new
  m = video 16428 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:126

  
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 12
  a = content: slides
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = 16430 RTP/AVP 100 application
  a = rtpmap:100 H224/4800
  a = sendrecv
  m = application 29789 UDP/UDT/IX
  a = ixmap:0 ping
  a = ixmap:2 xccp
  |
  ________________________________________________________________________________________________

  Work of appeal with TC 7.1.4
  ________________________________________________________________________________________________

  SIPMSG:
  | INVITE sip: [email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP xx.xxx.60.133:37491; branch = z9hG4bKe3dfed840a299516919a79e4a54cd707.1; rport
  Call ID: 480ec504782c0ad894929e882a696e74
  CSeq: INVITE 100
  Contact: sip: [email protected] / * /; gr = urn: uuid:6 c 856033-4cbd - 5 b 15 - bb13 - 0715c4a694cd, ob>
  From: "201101102_C40_ServiceDesk" sip: [email protected] / * />; tag = 3ab87b1c0d8b4d9d
  To: sip: [email protected] / * />
  Max-Forwards: 70
  Directions: sip:xx.xxx.1.51; lr>
  Allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM
  User-Agent: TANDBERG/520 (TC7.1.4.908e4a9)
  Supported: replaces, timer, 100rel, gruu, way, way out
  Session time-out: 1800
  Content-Type: application/sdp
  Content-Length: 2842
   
  v = 0
  o = xx.xxx.60.133 IN IP4 3 2 tandberg
  s = -.
  c = IN IP4 xx.xxx.60.133
  b = AS:6000
  t = 0 0
  m = audio 16394 RTP/AVP 107 108 109 110 104 105 9 15 18 8 0 101
  b = TIAS: 128000
  a = rtpmap:107 m4as-LATM/90000
  a = fmtp:107 profile-level-id = 25; object = 23; bitrate = 128000
  a = rtpmap:108 m4as-LATM/90000
  a = fmtp:108 profile-level-id = 24; object = 23; bitrate = 64000
  a = rtpmap:109 m4as-LATM/90000
  a = fmtp:109 profile-level-id = 24; object = 23; bitrate = 56000
  a = rtpmap:110 m4as-LATM/90000
  a = fmtp:110 profile-level-id = 24; object = 23; bitrate = 48000
  a = rtpmap:104 G7221/16000
  a bitrate = 32000 fmtp:104 =
  a = rtpmap:105 G7221/16000
  a = fmtp:105 bitrate = 24000
  a = rtpmap:9 G722/8000
  a = rtpmap:15 G728/8000
  a G729/8000 rtpmap:18 =
  a = annex b fmtp:18 = yes
  a = rtpmap:8 PCMA/8000
  a = rtpmap:0 PCMU/8000
  a rtpmap:101 telephone-event/8000 =
  a = fmtp:101 0-15
  a = sendrecv
  m = video 16396 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=245000;max-fs=9000;max-smbps=245000;max-fps=6000;max-rcmd-nalu-size=3456000 fmtp:126
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 11
  a = answer: full
  a = content: hand
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = application 29489 UDP/BFCP
  a = the installer: actpass
  a = confid:1
  a = userid:3
  a = floorid:2 mstrm:12
  a = floorctrl:c - s
  a = connection: new
  m = video 16398 RTP / AVP 97 126 96 34 31
  b = TIAS: 6000000
  a = rtpmap:97 H264/90000

  
  a = packetization-mode=0;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:97
  a = rtpmap:126 H264/90000
  a = packetization-mode=1;profile-level-id=428016;max-br=5000;max-mbps=108000;max-fs=3840;max-smbps=108000;max-fps=6000;max-rcmd-nalu-size=1474560 fmtp:126
  a = rtpmap:96 H263-1998/90000
  a = fmtp:96 custom = 1280, 768, 3; custom = 1280, 720, 3; custom = 1024, 768, 1; custom = 1024, 576, 2; custom = 800, 600, 1; cif4 = 1; custom = 720, 480, 1; custom = 640, 480, 1; custom = 512, 288, 1; CIF = 1; custom = 352, 240, 1; QCIF = 1; maxbr = 20000
  a = rtpmap:34 H263/90000
  a = fmtp:34 cif4 = 1; CIF = 1; QCIF = 1; maxbr = 20000
  a = rtpmap:31 H261/90000
  a cif fmtp:31 = = 1; QCIF = 1; maxbr = 20000
  a = label: 12
  a = content: slides
  a = rtcp-fb: * nack fold
  a = rtcp-fb: * ccm FIR
  a = rtcp-fb: * ccm tmmbr
  a = sendrecv
  m = 16400 RTP/AVP 100 application
  a = rtpmap:100 H224/4800
  a = sendrecv
  m = application 31127 UDP/UDT/IX
  a = ixmap:0 ping
  a = ixmap:2 xccp

  Another problem, indicated in diagnosis on a MX200 device tests, reporting problems of NTP. I tried to choose another NTP server - but this does not solve the problem, and it works with TC7.1.4. In addition to the time and date is wrong on the screen but OK on the touchscreen device.

  In addition, an error is reported on the OSD settings.

  Do you have advice?

  Thanks for help.
  |

  So, what's the problem? You just showed us an INVITATION. What is the configuration of your system? What is the reaction to INVITE him? We need complete diagnostic logs. Is this VCS - C registred? Where VCS - C diagnostic logs

• Treo 850 screen unlocks with incoming call

  Dear users of Palm,

  I have a Palm treo pro 850. I have a very small problem. The keypad unlocks when the phone rings (incoming call). This creates problems when I come out of my pocket. Sometimes, the call is ignored or received. I hope that some of you have had that probllem and could guide me. Thanks is advance for help.

  There are a few programs that emulate iPhone finger slide to unlock your device. Normally, your leg is unable to do so.

  This page has something of a tour d'horizon of programs for Windows Mobile. Note that not all of these programs will be with the resolution of 320 x 320 of the Treo Pro. I saw a post confirming that at least Sunscape work on the Treo Pro. I have not tried one of those myself (I use a belt case).

  Screen lock-Unlockers, list and details @ PPCGeeks

• satellite pro a60 problem with game called "call of duty".

  I have a satellite pro a60 with skvideo ati radeon 7000 igp. I have the problem with the game "call of duty" because it is too slow. With my old laptop with ati igp 340 skvideo is not this problem.
  ATI have solved this problem with the new driver, but for this toshiba is not new driver, why?

  Anyone know where I can find 'new post' I did not know where to click to make a new post!

• Problem with video calling

  Dear community of Skype,
  
  These days, I have a weird problem with my Skype. I want to use the video calling option but my video is all messed up. So you can see what is my problem, I have included a screenshot. In the screenshot its my webcam that mess, but when I call a friend its their video that looks like this. I have no idea how to solve this probem and hope you can help. I reinstalled Skype already and installed the latest version but the problem remains. I also tested my webcam with different chat like Facebook video chat programs, but there is no problem.

  I hope that my problem will be solved because I really like using Skype!
  
  PS I apologize for some grammar mistakes. English is not my native language

  

  What is the name/model of your version of map and graphics driver?

  If your graphics card is nVidia, then see this:

  http://community.Skype.com/T5/video-on-Windows/video-reception-not-right/m-p/1447456#M11141

  http://community.Skype.com/T5/Windows-desktop-client/webcam-problem/m-p/1515620/highlight/true#M1289...

• Problem with video calling on Android...

  Everything works fine but the video call is very dark on my android 4.1.2. Either way, my front cam is 1.3 mega pixels, but the same problem with my camera back which is 8.0 Mega Pixels... but when I open my camera its light show app. In this way I hate this... Please solve the problem of video calling...

  qa60
  Check your internet connection or check your microphone or try again with handfree...

• Anyone having problems with stacked calls?

  I have been stacking create/edit lead and senior partner with external calls to campaign in a single event for years.  Monday, all our calls stacked broke.  Create/change drive call fire very well. The campaign associated with lead call fails.  I can re-run their fine since the error log, which means that the call of the associated driver is fire prior to the initiative to create a call now, OR more probably that the SFDC ID drive is not charged enough faster now for the campaign to create fire.

  All flows into that?

  Support confirmed that associate campaign calls are indeed fire before creating lead calls sometimes.  The options are desempilement of your calls or to manually run your failures.

  Fortunately, I have a third option that accompanies us.  SureShot created an app for us that allows us to circumvent of Eloqua queue outgoing sync and sync leads in 40 seconds approximately.  We decided to move the lead to create/edit all calls through the app instead.

• Problem with incoming text messages from like white

  This just started happening a few hours ago.  A friend send me texts, and they began to come as a Virgin without transmitting messages. I turned my phone off and restarted it but no luck. I get a text the two texts that I see. This has happened to anyone using a Moto Droid?

  The Blackberry sounds like there is a problem with the phone. Get this kind of error message would not indicate a network problem. Tell them to do a battery pull.

• (Closed) Problem with Advanced call

  My wife and I have the turbo and love. I had to disable the function call of HD on my wife's phone because she was unable to make or receive calls. He begins to give her problems about 5 days ago. Before that, she had no problem. Someone at - it and ideas or suggestions for this problem?

  We have other threads with the same question. Short holiday off HD calls. The Association knows there is a problem and has several tickets on this subject. It comes out before you are ready from current principal. I'd wait until what an update just before I turn it back on.

• Problem with asynchronous call and Forget.vi and MessageBoxW (user32.dll)

  I have a problem.  I want to use the same type of structure as in "asynchronous call and Forget.vi.

  

  There is a picture of my (Message Box.vi) VI.

  

  The VI expect the 'narrow reference' I select OK or cancel.  This is not the expected behavior.  If I turn off the "narrow" reference I have the expected behavior (by renaming properly the buttons).

  

  What am I doing wrong with the asynchronous call?

  Looks like close reference wants the loop of the root and your dialogue it blocks until it is finished.   I assumed that Run in the user interface thread is selected in the COLD LAKE to the MessageBoxW function, try changing to run in any thread

• Have a problem with the call on the computer running slow

  I get a lot of calls, saying: my computer is slow and they need to fix the person said

  that windows has reported errors on my PC
  Is it a scam or real
  Thank you

  Hello

  It's a SCAM

  they want or money on your part for programs without value or make an identity theft on you to get even more money and get your internet banking passwords and credit card information, you get allows you to download the software to 'fix' or 'test' for your computer

  read this:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.