spacing of lines in the editor

Similar Questions

• Spacing of lines in the Pages

  I have major problems with the spacing of the lines in the Pages 5.6.1. The default setting is '1', suggesting no doubt single spacing, but it is much broader than that should generally be understood by this term. For example if I type high address of the recipient on the left, using a reasonable font size the entire address comes out much too deep to fit in a standard A4 envelope window. I have to manually select, define Style - line spacing IE 4pt. I have to do this every time I write a letter (and I write a lot of letters). This has never been a problem in AppleWorks.

  IF anyone knows how to get around this, I would be grateful to know. Thank you.

  1 LineSpacing depends on the font size.

  You must define the spacing 'Exactly' and also check if there is before or after paragraphs spacing that pushes the lines apart.

  Peter

• A jpg still print with white lines spaced, but I replaced the color cart.

  A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

  Hello

  That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

  A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

• can not find the line in the graph editor

  I put a few keyframes left the movement spuqre.  but I can't find the line in the graph Editor.   

  Please help me

  

  You must select a property to view the chart.

• Impossible to change the line spacing to fill in the blanks questions

  Is it possible to change spacing of fill in the blank question what anyone less than 2.2?

  I can do bigger, but not smaller.

  Thank you

  Dave

  No, they need space for the drop-down lists. That's the answer I get when you connect to a feature request for this type of question.

  You can always create a customized using TEB FIB question. Of course, those who can not be used in question pools, but can have partial credit if you have several drafts.

• Why the editor HTML to add/remove my code sometimes Landing Page?

  I had a few times and different landing pages, the HTML editor actually change my code. No matter how many times I return in the HTML editor and change my HTML code to the appropriate markup, the Publisher will change the code again once the page is saved.

  For example, once I got a header tag I was selecting by ID and then re-writing its contents on the page loading, based on certain situations, as follows:

  " < p id="hand-promo-description"> ". < /p >

  
  

  After you save the page, the editor has removed the closing tag, leaving the markup like:

  
  

  "< p id="hand-promo-description">".

  
  

  This broke the rest of my page. No matter how many times I added the closing tag (for example, < /p >), it would remove the HTML editor. The support of Prime Minister Eloqua said that we could not empty tags, so I dropped a unicode non breaking space in the empty tag value and MAGIC!... Eloqua stopped removing the tag:

  
  

  "< p id="hand-promo-description">& nbsp< /p > .

  
  

  Now, I'll have a similar on a < div > tag behavior of Eloqua. Adds randomly Eloqua < / div > tags in my code and completely break my page. In my example, it happens in a < div > nested on 3 or 4 layers (it happens in two places on the page). Yet once, no matter how many times I remove the extra < / div > tags, Eloqua adds to the time where I save the page.
  

  
  

  Someone at - it similar experiences? If Yes, what did you do to fix?
  

  If you change the raw HTML code, then the GUI based editor will change your code in its own version of the "correct" html (He has a rather unusual parser).

  Fortunately, there are always other ways to do the job.

  The Eloqua GUI editor seems to have a love affair with the DIVs.  (I actually saw him add

  
  to make a line break). After a long time with the GUI editing session, you can get the code that is a patchwork of nested
  s and s.  If you go into the raw HTML code and try to clean it, you have to be very careful.  If you delete a

  , you must be very careful eliminate the correspondent

  which closes the block. If you have a corn maze of

  s, this can be a very daunting task. (If delete you the wrong, Eloqua will try to fix it for you by providing the 'missing'

  -in the wrong place.)

  I've been hand-coding HTML gross for years, but am still (relatively) new Eloqua. So, I'm much more comfortable with the raw HTML editor as the GUI. That being said, here are a few tricks that help me when creating/debugging HTML pages in Eloqua.

  • Make sure that your block and Inline elements are correctly nested. (If you are not familiar with the element block and inline, this page is a good start). If you put a block or inline element in the wrong place, Eloqua will try to 'fix' for you - and probably in trouble.
  • HTML for web browsers is much more forgiving than HTML for Eloqua. You can write the baddest rat nest of semi valid HTML, and most browsers will understand what you are trying to do and fortunately wear. Eloqua is not as forgiving. Tags bad nested (such as
    Hello
    ) will correctly in most browsers, but tends to give the editor Eloqua a headache.
  • For HTML more complex, I like to copy the code in Notepad ++ and edit there. For me, the screen of Notepad ++ is much easier to read and work with.

  Hoping this will help you!

• Problem with the editor attribute PULLDOWN

  When we use the Editor menu attribute drop-DOWN we know the following behavior.

  We have a definition of the content with a non-binding string attribute which is an attribute of pulldown editor configured with queryassetname.

  When its use in the contributor interface following the chronology of the events:

  (1) content > new asset

  (2) assign a value in the launch menu displayed by the editor attribute of pulldown

  (3) save

  (4) modify the same assets and try to put a value empty in the attribute that is assigned pulldown attribute Editor, but it is not possible because there is no possible empty selection to leave blank the value of the attribute as it was by default.

  Thanks for any help in advance.

  Pedro

  Hi Pedro,

  There is a default created for the problem you describe: Bug 17562306 - menu DEROULANT ATTRIBUTE EDITOR not IS NOT HAVE WHITE VALUE for the OPTIONAL ATTRIBUTES.
  However this applies only when you use name QUERYASSETNAME instead of element tags to populate the attribute PullDown.

  I just did a quick test to create a new attribute to dropdown using element tags and it worked fine when I set a single value, saved and then set empty. See screenshots

  

  

  I was able to find a workaround for the active query name, it is to add value, then you can use it as a vacuum. See below:

  Add a null value line in the query of the assets of the query result.  In this way, there will be a null value to select in the drop-down menu to remove the value.

  for example SELECT name as the value of the status of Content_C WHERE<>"VO" UNION (SELECT NULL FROM DUAL) ORDER BY VALUE asc NULLS FIRST

  Of workaround seems to work for the attributes of optional or required string using this attribute of menu editor drop-DOWN with a resource request.

  Let me know you have questions.

  Best regards

  Guillermo.

• I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  1. Draw a set of concentric half circles also spaced, stacked so that the outermost is the most remote.
  2. Use the text tool to add text to the outermost path, thus creating a PathType object.
  3. Select all the paths. Type > threaded text > create.
  4. Text tool: click at the end of the text in the object of PathType. Continue typing.

  

  > If I do that it will not type more.

  A Warp effect is a direct effect. When it is applied to the type of objects, they are still editable text. The chain will deform, however, the text also, not only the paths to which it is attached. Sometimes you want that, sometimes you don't have.

  JET

• Shift-click to create straight lines with the Brush tool is no longer works in 2015 CC

  Hello!

  I feel a maddening thing I can't explain, maybe a bug or a dark environment?

  If I use the pencil tool, I can click on the same spot on the canvas, then releases, then hold SHIFT key and click in another location on the canvas to create a straight line between the two points. This is expected behavior, and Photoshop has done this for years, as long as I can remember.

  Until recently, the same has worked with the Brush tool. Since the upgrade to 2015 CC, however, shift-click on demand exactly as if I was clicking simply - he draws another full brush, but without a straight line connecting the two clicks. Weird.

  
  Everyone knows the same behavior? (CC and Yosemite are completely up to date.)

  
  Best,

  Jason

  

  (this little test of the brush is also to express my emotional state right now.)    : |

  Spacing stops on this special brush?

• End of the characters on the line in the SQL worksheet

  Hello
  
  All of a sudden end of characters on the line in the SQL in SQL Developer worksheet.
  
  Can someone please advice how to hide those?
  
  It looks like 2 ' < ' characters followed by a mathematical symbol Pi.
  
  Thank you
  Sagay

  Tools | Preferences | Code editor | Display | Show the white space characters

• Cannot start the editor of the network and receive a "Virtual ethernet = failed' message when recompiling"

  Hello

  I'll have this error weird - I never had when running VMWare on Windows XP - Linux 6.5 VMWare on Kubuntu 9.04 who cannot open the network Editor, just after I type my user password in the gksudo crushing of the network Editor window and refuse to start. I have this question in a new installation of Kubuntu 9.04 with all the patches with kernel 2.6.28 - 15-generic.

  Any help welcome

  Try from workstation from the command line using the following syntax to see if you still have questions

  VMWARE_USE_SHIPPED_GTK = force vmware

• Use the editor HTML JavaBean in Forms

  Hello
  
  Currently I'm trying to implement a JavaBean (Sferyx) HTML editor in our forms 10 g environment. The product works, however I leave how to manage the content of this Publisher. The content from the Publisher may be much more then 4000 characters, so I created a CLOB field in the database to store. The field used in forms is the LONG data type and I set the maximum length to 65534 property (the maximum).
  
  If I want to put the contents of the editor, I put the contents of the LONG field in a FBean.ArgList, which is then read by the editor. If I try to add a CLOB field in the arglist argument, this works if the CLOB has a smaller length then 6000 characters. If the length is great, it gives ORA-06502. When I look at the specifications of FBean.Add_Arg I see that it only accepts VARCHAR2, NUMBER, and BOOLEAN. So the so of seems strange to me. Another experiment was to add the contents of the field ALONG directly to the arglist argument. I was surprised to see that even though 30000 characters were present in the field LONG it could still be added to the arglist argument. The LONG field shows the ORA-01403 when the CLOB uses to much space, which in this case was more characters then 30000. A little strange, because of competition from 65534.
  
  My goal here is to make it possible to display the database CLOB field in the editor JavaBean. But before I post this, the CLOB value is changed by a function (which also returns a CLOB) of the database.
  
  Maybe I mix things here. So my questions are:
  1 why FBean.ArgList accepts a CLOB if he is small enough (because it implicitly converted to a VARCHAR2)?
  2. How is it possible that up to 30000 characters in a field of LONG forms can be put in an arglist, is it more then the maximum VARCHAR2?
  3. is there a way to add a large CLOB field to a FBean.ArgList (or a workaround to achieve the same thing)?
  
  Thanks for the replies!
  
  Best regards, Weis

  It does not accept a clob, as you've seen fbean.add_arg accepts number, boolean, and varchar2. If you switch to something else, an implicit type conversion is made.
  take into account:

  SQL> create or replace procedure some_procedure(ivVal in varchar2) is
    2  begin
    3  null;
    4  end;
    5  /
  
  Procedure created.
  
  SQL> r
    1  declare
    2    clob1 clob;
    3  begin
    4    DBMS_LOB.CREATETEMPORARY(clob1,TRUE, DBMS_LOB.SESSION);
    5    for i in 1..32767 loop
    6      dbms_lob.write(clob1, 1, i, 'a');
    7    end loop;
    8    some_procedure(clob1);
    9* end;
  
  PL/SQL procedure successfully completed.
  
  SQL> r
    1  declare
    2    clob1 clob;
    3  begin
    4    DBMS_LOB.CREATETEMPORARY(clob1,TRUE, DBMS_LOB.SESSION);
    5    for i in 1..500000 loop
    6      dbms_lob.write(clob1, 1, i, 'a');
    7    end loop;
    8    some_procedure(clob1);
    9* end;
  declare
  *
  ERROR at line 1:
  ORA-06502: PL/SQL: numeric or value error
  ORA-06512: at line 8
  

  The maximum varchar2 in PL/SQL is 32767 byte:

  SQL> r
    1  declare
    2  vDummy varchar2(32768);
    3  begin
    4  for i in 1..32768 loop
    5  vDummy := vDummy || 'a';
    6  end loop;
    7* end;
  vDummy varchar2(32768);
                  *
  ERROR at line 2:
  ORA-06550: line 2, column 17:
  PLS-00215: String length constraints must be in range (1 .. 32767)
  

  So, if you pass a longer than 32767 clob to a procedure that accepts conversion of type varchar2 will cause the digital error or value above that you exceed the maximum of 32767.

  One possibility would be to split the clob into several pieces of 32767 byte and pass those to your java bean.

  see you soon

• Spacing between lines of text

  I want the spacing between each of these lines of smaller text in other programs that I would cheat by making the font between the groups of 4 or 8 size text size. I can't do it in Indesign? Is there another way to do this? Thank you!

  Reflect: think carefully about experiences, personal knowledge past and examine what has been learned.

  Fundamental value: a small set of key concepts and ideals that guide a person's life and help him to make important decisions.

  Self-awareness: be able to understand and to self-regulate your emotions that they occur.

  Spacing between lines is controlled by the 'leader '. If you do not set something else, the 'automatic' deafult, spacing is 120% of the size, as in Word, but you can set any fixed amaount you like, or you can change the percentage of 'Auto' in the settings of Justificatin for paragraph or the paragraph style. Extra space between paragraphs is added correctly by adding "Space before" or "Space after" to a paragraph, not pressing Enter to make a blank line and by adjusting the size of this line.

• Help with the editor in excess

  Half of the text that is not displayed. There is a red box with + sign where it ends (editor in excess, right?). By pressing Ctrl + Y and clicking inside the box change the screen to reveal all of the text, with the red vertical line in the part that is hidden. I see no sign "#", which has been mentioned elsewhere in this issue. What should do?

  Owen,

  Silas

  -There are 500 pages in the identity document that I put in place to fill. I have inserted/place only 20 is not due to lack of available pages

  -Size margin should stay as it is and the text block fits well within margins horizontally.

  A - ha. This is the way the most obvious problem.

  ID expected proportionally to the size of the block of text on the fly when the text is imported, shouldn't it?

  Nope. Who doesn't, never did. If you place a file, the cursor displays a 'charge' State. You can draw a new framework when the cursor is loaded, or you can click on a framework of existing text to place the text "in".

  The problem is that you have already created many pages. Which tells InDesign that you already made up your mind where all the text needs to go, so he's like, "I arise you know what you're doing" and leaves the rest for you.

  Try the following, preferably with a new document, so you can see what is happening:

  1. create a new document. Do not bother about the number of pages - leave it as "1". Do not add blocks of text no more.

  2. call the Place dialog box, select your Word document, and then click OK in the dialog box. The cursor appears 'burden '.

  3 press and hold the SHIFT key and click once near the upper left corner of your margins. When he was close enough to the corner point (no precision pixels necessary, but you must be "somewhere near"!), InDesign automatically creates the new block of text within your margins. In addition, however, since you held the SHIFT key when you click on (did you, haven't you?), it will add as many sheets as necessary to place the entire file.

  If you change your text and get a new marker "in excess" in the end, because your text is no longer in the available frameworks, all you need to do is the following:

  1. with the black arrow, click once on the red marker overset. The cursor will move to the "State".

  2. Add one page, through the hand, the Pages panel menu, or with the default shortcut key Cmd + Shift + P (I think that's the one).

  3 shift + click the load slider to the top left of this new page. Again, InDesign creates a new default text box, fill it with text and adds more pages when necessary.

  Personally, I do not trust the function "automatically add and remove Pages" of CS5, which can be turned on and off in the preferences. but I do not use CS5 at all, then you can try as well if it works for you.

• spacing between lines

  Dear all,

  Can you please tell me how to change the spacing between the lines with css? I saw wee, letter spacing, and so forth, but can not find a way to adjust the spacing between the lines in a text block

  Thanks a lot for your help

  jvmonteiro

  A paragraph is coded using the

  tag, so you have to apply a style to the

  If you want to create space.

  So in this case, you would add the example that Nancy provided to your current style sheet or in the upper part of the document - depenind on where you have your styles.

  So, if you have created a style rule:

  {p}

  line-height: 1.5em / * spacing between lines * /.

  do-size: 14px;

  }

  This would be style every paragraph on your page.

  The font size can be any pixel size, or you can use a relative measure as ems.  Font sizes can be values such as: 10px, 12px, 14px, 16px etc.,.

  Article: http://www.alistapart.com/articles/howtosizetextincss/

  If however you only want a section of the page for special spacing in a paragraph, for example you have a main content div container, already implemented on the #maincontent page... then you can target all paragraphs in this container only by being more specific in your rule:

  #maincontent p {}

  line-height: 1.5em / * spacing between lines * /.

  do-size: 14px;

  }

  or

  #footer p {}

  line-height: 1.5em / * spacing between lines * /.

  do-size: 14px;

  }

  This video on a text style can be more Visual :-)

  http://www.Adobe.com/DesignCenter/Dreamweaver/articles/lrvid4222_dw.html

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://www.perrelink.com.au

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

  --------------------------------------------------

  http://Twitter.com/nadiap