Spare want 6-1006sa Keyboad

Similar Questions

• HP Envy M6 dx1205: spare battery want M6

  My original battery appears to be dead.  I ran several tests using information I found on this forum.  (I have a 0% available, hip, does not support message on the battery in the status bar icon).  I ordered a replacement battery which was not OEM.  Battery is not recognized despite updating the BIOS but also checking uninstall battery under Device Manager. Return this battery.

  I went through HP for a new OEM battery, only to be told to go to Impactcomputers.com for the purchase of replacement.  Still, I bought the battery recommended by HP; the company had only non - OEM, but this is where HP sent me.  This battery does not register either.

  So for those who read, I have:

  • update BIOS
  • battery tested BIOS
  • tried to use a different power adapter
  • Replace the original flat HP battery to try
  • have tried all the stuff I can find on the internet and on this discussion forum.

  I just need help.  I bought two new batteries and will neither recognized so that I can be powered by batteries.  I don't want a portable office.  So very frustrating not to find a battery.  I'm not buying a new laptop with a $50 battery.  It is a problem that can be easily fixed to HP.  Thus, HP, what is your suggestion?

  Hi @4vbgirls ,.

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your m6-1205dx HP ENVY Notebook and questions with the correct battery. Here is a link to your Manual 26, page and it shows that the original was a 62WHr of 6 cell 2.8 Ah lithium-ion battery 6 cells, with a part number 671731-001. If a new battery is not considered perhaps there is a problem with the motherboard and charge.

  You will need to test in a repair center to ensure that what is a failure.

  Thank you.

• HP pavilion Dv6 problem of fan - want to know the number of spare part

  Hello

  I bought a HP Pavilion dv6t QE in December 2011. Just after the warranty expired in December 2012 its fan stopped working. Whenever I go mobile I get error this laptop fan does not work properly. I'm ready to get the fan/radiator changed, but I'm not able to find the spare on the HP website. Please let me know the number of replacement HP Fan & Heatsink heat for model below:
  Series: 2CE14903X3
  Product: QJ912AV
  Model - dv6t - b 6, 00

  You are the very welcome.

  OK, the specifications indicate that since you have AMD and Intel switchable graphics, you must have an Intel processor in your machine. The tool shows 1 GB (1024 MB) of video memory for discreet video of AMD HD 6490 M

  Based on the specifications of your screenshot, it's the Fan/Heatsink combo that you need.

  Only for model computers with an Intel processor and a graphics subsystem with 1024 MB memory discrete HP Part # 665308-001

• Spare part material for HP HDX X 18 - 1190EZ Premium Notebook PC wanted!

  Hello community!

  During the replacement of the keyboard for laptop a very small part that fixed the keyboard on the motherboard is broken, what a pity!

  Now I'm looking a spare on the internet!

  Perhabs anyone in the community could help me find this part of attachment to fix the keyboard on this fantastic laptop motherboard?

  Thank you very much for your attention a your help!

  Daniel Feuerle

  {Deleted private information}
  

  There are several as-is or mothers coins on eBay right now. You could contact the sellers and see if the zif connector is intact. And here's one:

  http://www.eBay.com/ITM/506495-001-ASIS-HP-HDX-x18-1100-Intel-motherboard-/280704333143?PT=motherboards&hash=item415b483557

  The laptopking seller also has several for sale.

• IPhone price 6 spare speaker?

  I have a problem with my iphone 6 speaker, the sound come out of her is not high either pure I heard other devices, I know it's maybe a hardware problem, I tried to clean the dust, but the sound remains the same

  here in Egypt we have no support from apple, so I want to know how much it will cost you if want to get it from apple as an original spare part

  I'll ask a friend to get it and send it to me with any shredding company

  Apple doesn't sell parts, so you can't get it from Apple.

• Obsolete spare HARD drive

  Hello

  I just sent in my iMac (mid 2010 model) store The Machines (Malaysia) for repair because I can't start the machine to load to the end, it freezes it with a white screen. After 5 days, the shop said that the HARD drive is faulty, but Apple does not carry the spare parts for this model more because it is obsolete. No alternative is provided.

  1. Apple is using a special HARD disk or can I replace it with another model?

  2. I still can't believe that the HARD drive is obsolete. Is there any 3rd party companies that display yet of the party for the previous iMac model?

  Thank you.

  1. You can install the HARD drive you want on your iMac. It is possible to replace yourself, and just get a HARD install disk. OWC is a good place to get a hard drive for iMac-> https://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD?_ga=1.25500 6030.735377268.1455117871
  2. The HARD drive is not obsolete, but is your iMac. Recently, Apple has considered the two late 2009 and mid-2010 iMacs "obsolete" in most countries, so Apple provides no technical support for them more. However, as I said before, you can always try to fix the iMac yourself.

• Before: attachments not in the body of the letter. Now: attachments in the body of the letter - not wanted to so. How can I fix it?

  A few days when I used Thunderbird in sending electronic messages that I place an attachment it would remain just as an attachment and there was not change to what I had entered in the body of the message.

  Now, when I do an attachment to an e-mail message, the attachment holds with the message, but also becomes a part of the body of the message. that is the form or photo showing now fully in the body of the e-mail message.

  I want to know how to change Thunderbird back so that the spare part just stay attachments only.

  Thank you.

  AppMenu button - notice

  Uncheck "Display Attachments Inline".

• I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

  Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

  Give me the link or something where I can download the drivers...
  
  Thank you

  Edriss Dave

  HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

  Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

  . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

• Z400: Z400 spare parts upgrades

  Hi all

  I have a Z400 (saved to unset however) which works very well... Installed Win10 and voila! New PC.

  Thanks to the Info confirmed here, I Rev. 1 with 6 RAM slots

  Current config

  Xeon W3505 (Dual Core, not even Hyper Threading)

  12 GB 1333 Mhz RAM (2 gb x 6) clocked at 1 066 Mhz. thanks for CPU

  2 x Quadro FX580 cards

  LSI SAS3041E PCI-e Raid card

  SAS drives of 3 x 300 GB connected to the card from LSI

  PCI-e NETWORK card

  475w PSU

  SAS hard drives are noisy and slow (at 15 k RPM?)... First thing I did was to buy a Samsung 500 GB SSD Evo 850 (first day on Amazon with a $30 discount!) I checked and with the new BiOS installed (3.60) I confirmed that I have AHCI support so I hope the new SSD will bring me a big change even if only executed at sata2 instead of speed sata3... When the player is here I intend to remove the card raid and sas drives and install an extra sata 2 TB for storing drive instead... Also to get a pci-e sata3 card. Don't you think that it is worth more just go straight to the motherboard? I also read that start from a pci-e card slows down startup vs runnig just drive directly on the port sata motherboard, although running speed is slower. What you think. ?

  Next thing I look at is the processor. Thought of the w3680 or w3690... According to the price to get the ram at 1333 Mhz.

  Any other suggestions of CPU? Maybe the other supported that are not specified in the quick form.

  the current cpu cooler is rated for cpu 130w, so I think I should be fine... .unless you have a suggestion for a better option.

  I'm worried about the cpu power draw. Although I will eliminate 3 forts and power.hungry sas drives, I wonder if the current power supply will be sufficient for this and, possibly, a new graphics card. Maybe the new RX480 from AMD?  What do you think of it.

  ?.

  Your W3505 is already a 130W processor, so you have the fan Performance.  Moving around with either the W3680 (Search eBay for SLBV2 and you'll find some now to 93,50 dollars).  Or, if you want to spend 3.33 to 3.46 GHz speed spend the extra and get the W3690 for about 145.00 off eBay.  It's a psychological thing... you will not be able to make a difference in the real world, and all of the other major features are identical.

  The ultimate would be X 5690, which has a code unique sSpec SLBVX and used eBay now goes for about USD 245.00.  I got mine recently carefully shopping for 220,00, but revision 1 Z400 cost me only 100,00 more shipping charges.  I needed to do this test...

  I posted here about adding a map USB3.0 HP Texas Instruments... Make sure that it fits in a slot PCIe Gen II so the speed of the bus he let USB3.0 speed max.  My post has information on 5.25 HP 3.5 adapter that will allow you to place my interface front of Akasa preferred in this and below mount your optical drive in the Bay of spare up there.  I have included in on the device of 4-wire Molex brand OK to SATA power adapter I get Mouser.com to adapt perfectly to this card.  You end up with 4 slots USB3, 2 front back/2.

  Here are some links about this process:

  Here

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/Z600-z620-front-panel-USB-3-0-upgrade/m-p/5545549/highlight/true#M11730

  Here

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/USB-3-0-for-Z800/m-p/5066733/highlight/true#M4777

  and here

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/adding-a-USB-3-0-slots-ports-card-to-a-Z400/m-p/5086734

  You have the SSD... Gen II Gen III vs is not really a problem... take to plug that directly into the SATA port 0 of the motherboard.  Empty all SAS.

  I posted here on how to remove your spectacular startup time... reading about it.  The forum search box above to find these things.

  I added fan Northbridge 40x40x20mm, HP 4-wire version, a card mother xw6600.  Mine is screwed to the top the normal silver Northbridge heatsink fins, and there are several ways to reach that.  The fan blows away from the motherboard drawing cooler air through the radiator at the bottom.  The same fan is used on the Z600 Northbridge.  There is a standard white PWM header of motherboard close to spare, and I added a 4-wire Noctua online LNA that he abandoned his speed (which I do for fans of HP Northbridge).  Which adds to the overall length and connect the fan reach the motherboard header.  The RPM speeds now appear in the temp/RPM section of the Z400 BIOS as a memory cooling fan.  So, the original header seems to have been designed for a cooler of memory, but it is perfect for the Northbridge cooling.  One of these 2 processors speeds would stimulate the heat on the Northbridge and it was my solution (but probably is not really necessary).  I don't know if HP has never made a similar for some high-end Z400s, but seeing things fan used on the xw6600 and Z600 inspired me to add that, for this Z400.  You can get the fans with the correct HP wiring looking on eBay and China where they were all made.  It is precisely the Delta EFB0412HD-7R49 and this amendment at the end refers to the controlled PWM HP 4-wire version.

  You want all locations of memory 6 filled by identical 2 or 4 sticks GB, with speeds of memory at 1333 to get the best out of engineering memory HP and the fact that they will be able to run at this speed with these processors.

  The 6 HP PCIe supplementary power wire cable provides much more energy than the standard ATX 75W max... I do not a problem here for your video card needs, within reasonable limits.  Your use of the net power will be down and not upward, probably.

• Spare part Portege M930 digitizer pen

  Hello

  I'm having a little difficulty finding replacement/pens digitizer replacement for my Portege M930 - I still have the pen that comes with it, but I've been known to lose this kind of thing, so I want to be ready for the inevitable and know where I can get spare parts before I'm stuck without one!

  Please note that I'm only after the pen supplied with the M930-l am aware l can use wacom pens or other digitizer pens but I want really the same thing, as I have so it will still fit into the laptop, as soon as the pen must remain separate I lose them all the time and $ 30-40 a pop that will become expensive quickly! I have looked through the manual and cannot find a reference for her number, nor has google found a lot of use.

  Do you know where I can get another feather of digitizer M930? =)
  Thanks for any help! ~ Ashes C

  I guess if you want to use exactly the same pen that has been delivered with the Portege M930, you should contact Toshiba service provider authorized in your country. The service guys should be able to order this part (if available) directly from the main warehouse of Toshiba

• I got the watch aluminum gold. The soundtrack has metal fittings of color gold. Are there strips of spare with accessories of color gold?

  I got the watch aluminum gold. The soundtrack has metal fittings of color gold. Are there strips of spare with accessories of color gold?

  Hello

  Bands with colored pins but are not currently available for sale separately.

  The current lineup of the band is available here:

  http://www.Apple.com/us/shop/goto/watch/bands

  If you want that Apple to consider making bands with colors pins gold available for purchase separately, you can submit your comments here:

  https://www.Apple.com/feedback/watch.html

• -Power connector - Satellite Pro M70 of spare parts original purchase

  Hi all

  The power on my laptop Toshiba Satellite Pro M70 connector broke and my laptop is out of warranty...

  I want to buy a replacement part, where can I get an original piece of toshiba replacement?

  Here is a picture of the part:
  http://I264.Photobucket.com/albums/ii183/lkjh_g/IMG00055-20100131-1907.jpg

  Thank you

  Hello

  You can get all the spare parts Toshiba since an official authorized service provider. I n don't know where you life, but if you bought your laptop in Europe, you can find here an ASP in your country:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Just speak with technicians to get the right spare for you.

  Alternative under Feliks wrote that you can search on eBay for second hand parts. Sometimes you can get really good deals for this. ;)

• I want to replace the DVD-RAM UJ-846 for Qosmio G20-127

  Hello

  I want to replace my carpet * a DVD-RAM UJ-846 of the G20-127.
  Someone knows his apare part # and any sugestion wich RAM is compactables for my machine and better plase to get?

  Hello!

  If you want to replace your CD/DVD drive, you should look in your user manual. It should be a list of compatible drives that work with Notepad. Check it!

  The new RAM should be a SO-DIMM DDR2-533. The part number for 1 GB is PA3411U-1M1G.

  Finally and most importantly the best place for spare parts is the authorized service provider. They order all the original parts of Toshiba and the Toshiba site, you can search for the closest.

  Good bye

• Airport Extreme in Bridge Mode?  What did I want?

  I'm AT & T Uverse with Gigapower.  Until today I had 2 networks in my home, the AT & T router then the one I created on my Apple Airport Extreme.

  The tech told me that I can implement the airport just mirror or fill the AT & T network.  In this way all devices in the House are on the same network.  In the past, there are times where someone has been connected on the AT & T network, but wanted to print to the printer WiFi, which stood on the Airport network.  We must also be on the Airport network in order to access the iTunes account via the Remote App.  Only, it would be easier if everything was on the same network, and we did not have to worry about switching.

  I want to use Airport Extreme to give us better coverage downstairs in the House.  The AT & T router is in a closet on the floor.  The signal is not large in some rooms on the ground floor.

  How to make the Airport Bill as a Repeater for the AT & T network?  What is this called bypass surgery?

  Thanks in advance for your help and your big brain.

  Adam

  Yes. Plug your Airport Extreme in a spare Ethernet port on the router AT & T. open Airport utility, click on the Airport Extreme, select Edit, select network and the router Mode value: Off (Bridge Mode) and update. Your Airport Extreme is now part of the AT & T network.

  p.s. You need to connect a cable Cat 5 or Cat 6 Ethernet of the AT & T to the Airport Extreme router since they are in different places in the House.

• Spare part for discontinued part number 641477-001?

  Hello

  Part number 641477-001 is discontinued, is there a replacement part for it so I can fix it my laptop DV6-6060sa?

  I don't particularly want to buy a whole new notebook because of a ventilation module failed!

  Thank you, Simon.

  Hello Simon,.

  Sorry that there is no spare part for 641477-001 with HP from now, but the part is accessible to the general public with other providers.