Speakers work sometimes only

Similar Questions

• Satellite L350 number pad work sometimes only

  Does anyone have an idea why the keypad doesn't work sometimes?

  Not in EXCEL or in the composition of YAHOO to name a few.

  He now works for a reason any 123456789

  Thank you

  I have only a hypothesis and I think you should update the BIOS.
  Check if your laptop is already using the latest version of the BIOS.
  If Toshiba pilot European page provides a newer BIOS then try to update.

• HP Pavilion 15 laptop: Headphone Jack works sometimes?

  My headphone works sometimes only. I'll get my wired headset and I can hear everything perfectly clear, but if I leave the laptop on overnight or leave for 30 minutes, I hear nothing more.

  I checked to make sure that the headphone jack is the audio device by default and the earphone works perfectly fine, so I don't see what the problem.

  The only way to solve the problem, as far as I understand, is to just restart the phone whenever the problem occurs, and it works. But I'd rather not have to restart every time this problem occurs. I also do not have to send the laptop.

  @polarpower,

  Hello and thanks for the display on the HP support forums.  There are only two things that can cause for your problem of making head phone.  When the system goes and warms the chips that handle the audio channel enter a blocking state as soon as this happens her loose.  As soon as you restart the voltage on the chips are erased and will work very well until things warm up again and the right signal is applied to this chip to block again.

  You can try to backup all your data and perform a recovery of the system so that tha system goes back to its original configuration.  It will be deleted including updates which could have caused this.

  Even though this is listed as Windows 8 you can use for Windows 10.

  HP computers - performing a recovery of HP (Windows 8) system

  Failure to resolve the issue, you will need to send in for repair.  Use the following link to help you contact the appropriate HP support department.

  Contact HP support.

  Please let me know how things are going with this.  Thanks again for posting and have a great day.

• External speakers work only with powerpoint.

  External speakers work only with powerpoint. DVD, internet, music files, are not. They worked for the first few weeks.

  I have a HP dv7-6c27cl with intel core i5 and Windows 7.

  When I have the system check it, it finds no problem.  Apparently, I have the latest drivers. The fact that the speakers work with powerpoint, which is confusing.

  When I play a video file or music, I get an error message: "Windows Media Player has encountered a problem while playing the file."

  The headset works for internet but not DVD.

  I've installed Weatherbug a week ago and had to uninstall other garbage that come with it. I think that's when the problem started.

  Well, I set myself just now. I did a system restore to a point before that I installed Weatherbug, and now everything's fine.

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• Connectivity LAN on Satellite L20-205 works sometimes and sometimes not

  Hello

  Well im using ethernet to connect to internet. The thing is, sometimes it works, sometimes not. There are times when I can connect immediately after that I turned on the laptop, there are moments where the connection becomes available after 10 minutes of operation of the laptop, sometimes it doesn't quite work.

  However, sometimes the connection could freeze even after running for some time. Actually, its kind of voodoo magic connection to the net via this phone. It is said that the cable is connected, but there is 0 packets. It frustrates some me... so I'm wondering if anyone has come across a similar behaviour of his satellites?

  Hello

  On this path, it is not easy to say why this is happening. Good and stable connectivity LAN depends on a few different factors. You must know that this laptop can not only peripheral being responsible for this. I put t know what LAN you use (probably DSL at home), but you must also check if the ADSL modem or router is configured correctly.

  If you are free, try to connect to your laptop to some other LAN to check how it works on an independent network. I really can't imagine that LAN card or driver may be responsible for this.

  I use at home of DSL connectivity and if the router is without power for a while, it can takes about 10 minutes before I can use an Internet connection.

• Satellite L50-A-19N - sound doesn't work sometimes

  Hello

  I am currently the owner of a Toshiba Satellite L50-A-19N and the sound does not work sometimes.

  When I play an audio file or a video or same file while playing a video from YouTube, works well for a while and then suddenly it stops.
  When that happens, his is always recognized the system because you can see in the volume control, but no sound from my speakers.
  The same thing also happens when I connect my external audio interface (M - Audio Fast Track USB).

  I use Windows 8.1
  Please help me, because I use my Toshiba mainly for music production and play.

  > When that happens, his is always recognized the system because you can see in the volume control, but no sound from my speakers.

  Have you tried to connect a headset while this problem occurs?
  Please check.

  In addition, you must uninstall the audio driver installed.
  Then you must reboot the laptop and after installing the audio driver (you can get it from the page of the Toshiba driver) once again.

  Finally and above all, you said that you are using an external audio interface.
  I m not quite sure all these software but it might be possible that these additional 3rd party software could affect the internal sound card / driver. This should be checked as well.

  If possible I recommend you test the laptop without these 3 tools/software audio

• Satellite A300 - keyboard does not work sometimes

  Hello

  the boot of my Toshiba Satellite A300 computer laptop keyboard doesn't work sometimes?

  After a reboot, everything is ok!

  Anyone know why the keyboard does not work sometimes?
  Greetings

  On this virtual path, it is not easy to give you a precise answer, especially if it happens sometimes and I think that you need professional help with this.

  There may be a connection between the keyboard and the motherboard problem.
  I fear, we can only speculate that the problem can be m.

• Internal speakers work, but do headphones.

  There is no sound from the internal speakers (windows 7).  However when I plug in the headset, you hear his fine (through headphones).  I heard it might be a mechanical problem with the headphone Sockets, but they seem to be good.

  YES! IT WORKED! (only took me three times to plug in / take the helmet).

• sound sometimes works, sometimes not

  The sound on my computer sometimes works, sometimes not. I have a HP pavilion touchsmart laptop computer running windows 8. I'm really not tech savy and hesitant to try troubleshooting on my own too. Support and suggestions would be helpful. Not sure if this has to do with updates or why it works sometimes and other times not.

  Hello

  Personally, I would say running through the procedure that I detailed in my initial post, because it is relatively in line forward and in all likelihood, you'll need to remove the particular update ( KB2962407 ) and then hide it from restarting.

  At the end of the day, only you can decide what you feel comfortable with and if your laptop are still under warranty, using staples or HP must be free.

  Kind regards

  DP - K

• Ethernet cable to connect my windows laptop 7 to the internet. connection is very bad. It works but only for 30 minutes max.

  My internet does not work correctly. I use an ethernet cable to connect my laptop (using windows 7) to the internet. However the connection is very bad. Sometimes it works but only for 30 minutes max, and other times it does not at all, connect saying that the cable is disconnected. I tried 3 different cables to 2 different ports, then maybe the problem comes from my laptop. It connects to the wifi networks fine but not with the cable. Does anyone have any suggestions as to what could be the problem and how can I solve this problem?

  Hello

  1 did you changes to the computer?

  2 did you receive an error message?

  Method 1:

  I suggest to check and make sure that all cables are connected correctly.

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• Some documents in MS Reader cannot be searched. Research work sometimes

  Some documents in MS Reader cannot be searched. Search function works sometimes.
  Switch to another document and it can be searched. Using Windows XP

  First of all, the CD player is not compatible with Windows XP.

  The search may fail because there is no 'real' text in the document, for example if it contains only the digital images.

  You are able to select the text in the file, Word for Word? If so, you are able to copy and paste in another application? If not then you will not be able to pick him up, either.

• First cc pro FREEZES every day and I have to FORCE QUIT and restart... sometimes only seconds apart. Super frustrating. a fix?

  First pro FREEZES every day and I have to FORCE QUIT and restart... sometimes only seconds apart. Super frustrating. a fix?

  I'll be edditing and first pro will freeze comes all of a sudden. It will not release little matter how long leave you it. I have to force quit and restart my project and I lost some work I did not save. It happens sometimes only every 30 minutes... Other times every 15 min other times every 20 seconds.  It happens every day... Its been doing this for at least a month. Any help? Someone else has the same problem without solution.  The computer's specifications are as follows:

  IMac

  OS X Yosemite (10.10.2)
  Processor: 2.8 GHz Intel Core i7
  Memory: 16 GB at 1333 MHz DDR3
  Graphics card: AMD Radeon HD 6770 M 512 MB

  I have removed all malware from my computer and first pro cc is up-to-date.

  I started using CC a little back and have done most of the work on this project in CC. I think I can finish it in first pro cc. At the moment I have the project queue upward and make... Its takes a while, but I think it will work. The question knowing brings me great relief! I was worried that it was just a problem with the first. Thank you very much for your help! This problem is solved!

• PartialTriggers works sometimes for table

  HI guys,.
  
  I'm new in the adf and a problem in partialTriggers it works sometimes and sometimes not.
  I am inserting a new row in the table, but his table every time not updated with the new record. I use jdeveloper 11.1.2.3.0. I also tried in java AdfFacesContext.getCurrentInstance () .addPartialTarget (blanketTable); still works but only sometimes.
  
  
  < af:table value = "#{bindings.xxjcb_sw_po_vwBlankets11.collectionModel} '"
  var = "row".
  Rows = "#{Bindings.xxjcb_sw_po_vwBlankets11.rangeSize} '"
  emptyText = "#{bindings.xxjcb_sw_po_vwBlankets11.viewable?" "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings.xxjcb_sw_po_vwBlankets11.rangeSize} '"
  rowBandingInterval = '0 '.
  selectionListener = "#{bindings.xxjcb_sw_po_vwBlankets11.collectionModel.makeCurrent} '"
  rowSelection = "single" id = "t1" immediate = "true".
  autoHeightRows = '7' styleClass = "AFStretchWidth."
  Binding = "#{workBench.blanketTable}" partialTriggers = ": pgl27:cb21" > "
  < af:column sortProperty = 'PoNumber' sortable = "false" rowHeader = 'true '.
  headerText = "" PO # "id ="c23">"
  < af:outputText value = "#{rank." PoNumber}"id ="ot4"/ >
  < / af:column >
  < af:column sortProperty = 'Name' sortable = "false".
  rowHeader = "true" headerText = "Name of the provider" id = 'c18' >
  < af:outputText value = "#{rank." SupplierName}"id ="ot21"/ >
  < / af:column >
  < / af:table >
  
  
  and my bean code is
  
  {} public void savePO (ActionEvent actionEvent)
  OperationBinding oper = ADFUtils.findOperation ("vsku_save_new_po");
  oper.getParamsMap () .put ("num_of_elements",
  outb_size_cnt * outb_width_cnt);
  oper.getParamsMap () .put ("ssku_id", ssku_id);
  oper.getParamsMap () .put ("vsku_detail_grid", master_vsku_array);
  oper.getParamsMap () .put ("order_type", "COVER");
  Oper.Execute ();
  
  String [] ret_str = (String []) oper.getResult ();
  If (ret_str [0] .equals ("SUCCESS")) {}
  logger.info ("SUCCESS recordnewPO - IN. #-" + ret_str [1]);
  Oper = ADFUtils.findOperation ("Commit");
  Oper.Execute ();
  }
  If (ret_str [0] .equals ("ERROR")) {}
  _logger.info ("ERROR save_newPO - reasons-" + ret_str [1]);
  //
  Rollback();
  }
  }
  
  Thank you
  Rahul

  @946612

  Just try refreshing your iterator maps to the table.

  for example -.

  DCIteratorBinding = yourIter
  ADFUtils.findIterator ("yourIter");
  yourIter.executeQuery ();

  Thank you.. !!!

• Updated and now the phone won't work online only works with 4G

  Download ios 10 and now my phone does not work online only work with 4G

  Hello thomas.friar,

  Thanks for asking for help with your iPhone to connect to the internet via wi - fi since the upgrade to iOS 10. We don't like to hear about the problems that occur after an upgrade. Here's what I recommend.

  The first thing we want to make sure that all of your data on the Mac and the iPhone is safe. For iPhone, you can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Then, follow the steps in this link: If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  Thanks again and have a great rest of your day.