Specific translation for an entity

Similar Questions

• Need a specification complete for Tecra R10 - 147

  Hello!
  Can someone give me please the specifications (especially for the 3G chip embedded) for my Tecra R10-147.
  I need some specific technical information that I can't find anywhere on the net. Tecra model doesn't even exist on the Toshiba site. I'm french, and perhaps that is an exclusive model for the France or Europe.
  Thank you

  Matt

  It is not easy to find the complete specification.
  I'm sure you know what components are inside.

  About 3G I just make it is - 3 G HSPA FOR EU - 7.2/2.0MBPS DIVERSITY and supports the European region.

  What do you want exactly?

• failure of the regular creation of translation for the protocol 50

  Hello

  I get the following error message when you try to connect a vpn client via an ASA5505 with an ipsec already configured a connection site to site AES/256:

  failed to create regular translation for protocol 50 src:inside:192.168.1.167

  DST: Outside:XX.xxx.x.64

  The address of a site isn't relevant, I don't mean to pass traffic to the site to site, but rather to create a new virtual private network from inside the customer external VPN outside which is not under my control.

  The client is able to create a connection, but no traffic is passed, when I try to ping / rdp, the message above is returned to me.

  If I add the static rule (indoor, outdoor) interface 192.168.1.167 netmask 255.255.255.255 then it works, everything works, but ONLY from this computer.

  Been Googling for hours, but no result yet.

  Hope someone can shed some light on my questions.

  Thank you

  \\mark

  Hi, as the client away from end running the VPN server to turn on NAT - T, if they have a PIX / ASA have then add isakmp nat-traversal crypto 20 just as you do not have in your.

  Concerning

• When I'm not going to update 6.0 to 6.4, it become a CC version 2015.4! I used to stay in 6.4 and no. CC version! Do you have a specific process for this?

  When I'm not going to update 6.0 to 6.4, it become a CC version 2015.4! I used to stay in 6.4 and no. CC version! Do you have a specific process for this?

  See if this link helps:

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Is there a specific forum for each tutorial such as the first condition in DW?

  I'm doing the tutorial here: retrieves a Photoshop design into code in Dreamweaver | Adobe Dreamweaver tutorials CC

  I asked how to get the pictures in the tutorial is displayed on my computer, but I can't ask the right question, I guess. I downloaded the files, the unzipped in a folder that is newly formed and named my site, but the pictures of the PS are not displayed.

  So my first question is: Y at - it a specific forum for each DW tutorial as with all prime which has its ' own forum? Here is the link to this forum. Man and style a webpage in Dreamweaver

  Second question is higher on the photos of PS in the first link.

  Thank you

  Deb

  I repeat the advice that has been given over and repeatedly learn DO NOT "Dreamweaver". The door to collaboration successfully with any web development, including Dreamweaver software, is to understand the role of HTML and CSS.

  HTML is still pretty simple. The main thing that happened with HTML5 has been the introduction of some new elements of grouping, such as the header, footer, section, article and so on. Most of them are named intuitively, but you can continue to use the div to group items. What has changed is CSS. She is now much more powerful and has become more difficult to control. Even people like me, who have it used for years, have to learn new things all the time.

  Regarding the suggestion through courses on lynda.com, I'm obviously biased. However, I would advise against the use of lynda.com to learn the basics of Dreamweaver. The main course of Dreamweaver, Dreamweaver CC Essential Trainingis up to date. It will be updated, but not immediately. There are more courses Dreamweaver to update on lynda.com, including my Responsive Design with Bootstrap and Dreamweaver CC 2015and create a site of first with Dreamweaver CC 2105 of Paul Trani. However, they assume a basic knowledge of HTML and CSS.

  For those who have a lynda.com subscription, or plan to get one, first courses, you should look at are HTML Essential Training, Web Design Fundamentalsand basics of CSS. These three courses are taught by James Williamson, who is a brilliant teacher.

  There is, of course, other resources that teach the same basic web development technologies, some free, others paid for. But until you have a good knowledge of HTML and CSS, Dreamweaver will remain a frustrating mystery.

• get files from a specific folder for adding a pdf file

  Hello

  How can I get a file in a specific folder for adding a pdf file?

  You don't need to get the files in the folder B, if you know what is the path of the folder B, and what are the names of files...

  To process several files, you use an Action in Acrobat Pro. They have to run the following JS code (assuming that this file B is actually C:\Temp\B\):

  var folderBPath = "/ c/temp/b /;

  this.insertPages ({cPath: folderBPath + this.documentFileName});

  Then add a Save command, and you're done.

• Contex-sensitive help in a specific window for application of VB with robohelp HTML

  Hello

  For the first time, I had developed a context-sensitive help for my vb application. Now I'm unable to view help in a specific window. I also tried entering the window after the path of the .chm file. Pls kindly help me out in the generation of context-sensitive help in a specific window for the wise VB application stage.

  You can check this link.

• Cannot set a specific repository for a machine

  I tried many ways to change/set a specific repository for a specific computer and it always goes back to the original.  I removed from the basic machine (saved restore points) and created a new repository. When I added the rear machine automatically resumed inside the restore points, etc. and back have been started.

  I removed again (guarded restore points), pushed the agent to the machine and selected the new repository and he said the agent on this computer is the same as the agent on this computer and reset it with the changes. Rebooted the machine.  However, he still picked up points of restoration on the core and attached to the old repository.

  I tried a total of 5 different ways to get this machine to see a new repository, but no luck.  The only thing I did is remove the machine & points of restoration out of the nucleus and the Constable and I tried.   Archiving is a joke to say the least and takes 20 hours to around 2.2 to has failed or * the rest of the system (as he did last night).

  I used several different backup systems, but AppAssure is by far the worst, slower and less reliable I've seen.  Even my old band system Veritas has been 100% reliable and I spent less time to manage.

  I'm only protect three machines on it so it can't be that difficult.  Any thoughts?

  Thank you. Russ

  Hi Russ,

  AppAssure has a relationship one between the agent and the repository.  You can have data from an agent in a repository at the same time.  Because Wes pointed out you can follow this KB support.software.dell.com/.../117750 . to migrate from the agent and he gave repo from one to the other.

  There is another option to move an agent to a new repository.  You can change the Unique ID of the Agent and then restore it.  By doing this, the kernel will see it as a new agent and allow you to define any repository on your heart, as is the master repository.  If you take this approach, you can keep the old restore points for the agent in the first repository and have all new backups to go to the new repository. Please note that you can never match these two sets of recovery points together once again, because the kernel identifies as a different agent data.  Then they will be displayed always separately.

  To make this change:

  1. Change the display name of the current agent to something different (usually I just add - old for it)
  2. Stop the agent service
  3. On the agent, remove the HKEY_LOCAL_MACHINE\SOFTWARE\AppRecovery\Agent\AgentId registry key
  4. Start the agent service and the registry key and the subkeys will be regenerated
  5. Run the wizard of protection on the basis of protecting agent and be sure to select the right repository
  6. Delete the former agent of protection and keep the recovery points
  7. You have now - former agents like recovery Points only and agent under protection.  A new base image is taken as there is still no data for this agent, but once the base is taken all subsequent backups should be incremental.

  As for your statement about archiving is a joke, I would need to learn more about your configuration to make a statement. What storage do you use for your storage space?  What speed, the size and the number of disks are used?  What RAID configuration? Is it directly attached, NAS or CIFS? Personally, I always found AppAssure as reliable when repository storage is reliable.  Regarding speed, AppAssure runs how fast on your database server resources are capable. I saw TB of data archived in just a few hours.  I've also seen take days.  It depends on the material used.

  Tim

• Translation of HFM entity Currency Adjustment and roll-up to the parent entities

  Hello

  I hope someone can help me understand why a Currency Adjustment amount entity does not and the roll-up for the entities of parents to the two accounts used in a journal entry. See below for more details:

  Journal entry

  

  After you run a "consolidate all Data with ' , I see the following results in Smart View:

  

  I was expecting to see the amount of translated paper winding to entities parent as indicated below in red (I manually added the Red amounts for demonstration):

  

  In addition, the translation done by the system uses EOMRate instead of PREVEOMRate exchange currency. 0115 account is the P & L account type and should be translated by using PREVEOMRate.

  I really appreciate any help you can provide.

  Thank you

  Carmen G.

  Hi Carmen,.

  I'm glad that you found the solution.

  However, I wouldn't consider the flag of Type switch to sink as a problem, but you have a better understanding of the issue.

  If you have any questions, can you please close the topic because it is too long?

  See you soon,.

  Thanos

• Lost in translation (for JS)

  Hi all

  I wrote an applescript script, but I need to convert it to JavaScript to ensure compatibility with a 3rd party pugin.

  I'm having a bit of badly translated the following section of code from as to JS.

  Tell application "Adobe InDesign CS5"

  Set DocumentLinks to the path of file of all links in the active document

  tell the end

  So far, I have the following js:

  var documentLinks = [];

  myDocument var = app.documents.item (0);

  for (var myCounter = 0; myCounter < myDocument.allGraphics.length; myCounter ++) {}

  var myGraphic = myDocument.allGraphics [myCounter];

  myLink var = myGraphic.itemLink;

  var myPath = myLink.filePath;

  var documentLinksCount = documentLinks.push (myPath);

  }

  When I try to run it with a specific indesign document, I get the error 'null is not an object' and the ' var myPath = myLink.filePath; ' line is highlighted.

  I think that this error occurs because as "myDocument.allGraphics.length;" has a value of 19 with this document, but when I look at the links manually palette in indesign, I see only 18 links.

  so somehow, I have a picture on the page that has one track zero which is causing my script for the error.

  can someone tell me the best approach to work around this problem?

  Thank you!

  Sorry, my code there was an error:

  var documentLinks = app.activeDocument.links.everyItem().filePath;
  

  Substances

• Trying unsucessfully to install an add-on translation for Firefox 11

  After losing my Google toolbar translation feature, because I don't have the toolbar, I'm looking for something else. I tried some of the modules of translation, but none seems not to work. They all (at least what I tried) are classified as not compatible with Firefox 11. Any suggestions?

  see if one of them is useful:

  Translator of Google for Firefox Add-on

  Fast translation module

  ImTranslator - Translator online dictionary, the TTS module

  Thank you

• Need a specification complete for laptop model Satellite

  Hello to one and all. I am experienced with the use of the forums, but this is the first time the Forum of Toshiba. So apologies if I write in the wrong section.

  In fact, my daughter who has autism, got a DSA grant to help him to go to University. They say she may have a laptop computer and the provider gave me the following details of what they provide, which is...

  WKH15 PC Toshiba laptop with Core i3 (3217U) 4GB 320 GB DVDRW WIFI Webcam Windows Bridge Ivy 8 (integrated Intel HD Graphics 4000)

  I want to see the complete specification and any review of the toshiba laptop above, before I accept it. I can pay extra to have a better, if I think it is necessary.

  The problem is, I can't find anything on this model and am wondering if anyone can point me in the right direction, or maybe even have one and can give me relevant information.

  Thanks much for any help.

  To be honest I don't understand your provider. Each manufacturer offers different portable model with different model name or model number so that customers can find presentation on the manufacturers web page.

  Different models have same hardware platform, so I don't know how to help you with your question. Ask her to model exact name or model number, so we can find the exact specification for laptop on the toshiba support page.

• Re: Satellite L300D-800 - specific settings for Windows 7?

  Hi This is unrelated to my previous post.

  I installed Windows 7 on this Vista laptop and it's a great software. But I think that Toshiba settings are missing which is the cause of overheating and shuts down.

  Can I do to prevent it from overheating? Toshiba recommended settings for my mobile specific for running Windows 7. Is it still possible to them?

  Thank you
  Kris

  Hey Buddy,

  Recommend that the settings say you or wait?

  In my opinion if your laptop is overheating, you should try to clean using compressed air stream. Blow gently and shortly with a jet of compressed air and, therefore, it of not necessary to disassemble the laptop. He could blow the dust from the cooling fans and should be done from time to time.

  Check this box!

• You can add a specific artist for you?

  After clicking through the artists ever, I don't see many bands that I want to add.  It would be nice if there was an option to manually add specific bands.

  Short answer: not that I have ever found.

  Best suggestion:

  From now "For You" does not work as well as I do. I have some suggestions of genres that I completely removed on initial Setup, I have too many suggestions of artist for bands I don't like tracks I told them repeatedly and sometimes I will love an all the songs from the album of the band hoping to get suggestions, but it rarely works. To me "For You" is good about 75% of the time. I left a bug report in the comments (here's the link if you want to leave an as well http://www.apple.com/feedback/apple-music.html ) or in your case, you might want to make a feature suggestion.

  Things I do to work around it. Looking for a band. Results page will give "First results", "Albums", "Songs", "Playlists" you and a few other things. I click on the word playlists and see all the playlists associated with the group that I like. Many are several selections of the artist. You can add these playlists on your account by opening the playlist by clicking on the icon at the top right.

  You can also go to the artists page and find "Similar artists" on the side and do a search on them to find playlists.

• Password specific App for iMessage on different Macs

  For reasons that are not clear to me, my iMac at home required a new password for iMessage. Before rebooting I did after that Adobe & Microsoft put updated iMessage worked, after reboot it did not work, but asked a specific app password. I was able to generate this app specific password via my iCloud account and with this subject iMessage works again.

  Now to the questions:

  (1) why iMessage (I use only iMessage, FaceTime) suddenly require this new password? There was a lot of restarts I did earlier, and also many software upgrades.

  (2) / should/must use the same password app specific to iMessage on different Macs (home, office, laptop), I? And on the iPhone as well? As much as I know, these instances iMessage all currently running with my password to iCloud/AppleID 'main' argued on behalf of iCloud in (Control Panel).

  1. you have stage 2 verification in place of your Apple ID?

  Apple ID - step two checks FAQ

  Authentication in two stages for iMessage and FaceTime

  2. Yes, if the answer to question 1 is in the affirmative.