Spectrum XT: Spectrum XT Lines vertical pulse on the screen: the possible inverter failure?

Similar Questions

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• Over Pro 8600 black line vertically when printing from charger only

  One year old Officejet Pro 8600 Plus on iMac running OSX Maverick works very well.  For the last week, all the copies show clean, black, original vertical when line is loaded from the top of the charger page. This line does not appear when they are copied from the glass.  The line stops about 1/8 "from top and bottom of the copy.  It is exactly 6 "between the left edge of the copy, 2-1/2" from the right edge.  I had a paper jam tray - but months before this line started to show.  Nothing else recently that I'm aware of that could be the cause.

  How can I get rid of him?  Thanks for your suggestions.

  Hello again Boxcarjim,

  I see that we still have a problem with the veins.  If you have tried all the troubleshooting steps on the document I have provided and you have cleaned the paper rolls, the next course of action would be to contact HP Total care.

  Here's the information to contact HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

  See you soon,.

• LINES VERTICAL

  Mac OS X 10.8

  HP Laserjet 1536

  I keep getting a vertical black line when I use the CHARGER OF DOCUMENTS (not the glass) for scanning or copying.

  Suggestions?

  Hello Pstoll,

  Thanks for the post.  From what you describe, I suspect there's something deposited in the rolls of the ADF, or they are dirty.  Do you have a recent paper get stuck in the ADF?  I have included a link below for a document with some great not in t - shooting for that to be resolved.  Good luck!

  http://support.HP.com/us-en/document/c03106150

• Pink & red lines vertical & horizontal with mini box?

  I moved an object I created on the artboard.  In doing so, she reveals pink & red lines vertical around all elements in the object.  Each section of line has a mini pink or red box with a number in the top right corner and what looks like a histogram? Included is a snapshot of what it looks like.  What is this information and how it remove?

  Here are the slices.

  Go to object > slice to remove them.

• break a subform that contains vertical lines between pages / break the vertical lines between pages

  Hello

  I have a table whose fields can develop. There is an another subform on the side that contains two vertical lines with the height increases if the height of the table increases. The table and the subform are in a provision passed. The challenge is that the subform with the lines does not break between pages. The subform is enabled to allow page breaks, but still it does not break. How to get there?

  I solved by creating the columns on the side and leave the table and breaking lines between pages. The cell border will serve as lines.

• OSX suddenly stopped and restarted but does not restart. Lines of color on the screen

  Hello

  I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.

  The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.

  When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.

  Can someone help me find a solution or help me pin point the problem?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• Line green upright on the LCD of the Qosmio G20

  (Sorry for my bad English)

  Hi all

  my laptop has a vertical green line on the right side of the line of screen.this is also visible in the BIOS screen. so I think it is a linked material issue.but a good thing is that it is not visible in white background.i don't know why;

  Y at - it something I can do other than replacing the screen (I have no warranty on the LAPTOP :()

  The problem occurred after installing windows 7 beta edition, it changed my resolution to 1400 * 900 and I think which can cause overheating graphics card, which can lead to my problem.

  Please help me.

  > Is there something I can do other than replacing the screen (I have no warranty on the LAPTOP)

  I would not replace the front screen that you don't know what's exactly wrong.
  I mean there might be also a problem of graphics card and no screen problem.
  In your case, I would recommend connection of the unit to the external monitor to check if the same vertical line would appear on a second monitor.

  If the same lines are visible on the two screens then it s certainly not a problem of display but GPU and in this case that the motherboard must be replaced :(

• Satellite M70-151 - line gray portrait in the middle of the screen

  Hello

  Since a few days of view, I have a problem with my laptop, Satellite M 70-151.

  There is a vertical line (dark gray) in the middle of the screen... It appeared when I used microsoft word.
  At first I thought that it is just an error display or something... but after a reboot, it was still there... so I tried reinstalling display drivers...
  other drivers to install the display, but it did not help anything. The line is not as visible on a screen... It is always in the same place on the screen

  so I think that it cannot be that the material... the screen itself, but I was always very carefully with Notepad.

  my warranty ran out 5 months ago... do anyone know what I can do now?
  Don't know how to fix :(

  (sry for my bad English)

  In my opinion, it's certainly a hardware problem. I am not sure, but it must be malfunction of the display. To confirm this test with external monitor. If the desktop without this gray line certainly display problem.

  How to solve it? You can live with it or the display must be exchanged. Also, there are not many possibilities. You can contact the authorized service provider to see how much the repair will be fresh, or you can try to view an opportunity (e.g. eBay). The second option is cheaper but without maintenance manuals, you should not disassemble the laptop on your own.

• Satellite L850D - lines of color on the screen of the BIOS

  Hello

  I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line that I usually remove the battery and put it again and it will enter the bios setup.

  Any ideas what the cause?

  It s just an idea, but maybe it s a graphics card problem.
  In your case, I would ask the authorized Toshiba maintainer for the verification of the material.
  It is best to do while the laptop is always protected by the guarantee.

• iMac (late 2009) 27-inch vertical streak on the right side

  iMac (late 2009) 27-inch vertical streak on the right side. Oddly enough it is still there even on the gray splash screen. How much is it? I tried restarts it, Vpram etc, but still there. Always in the same place. Is a graphics card out or the display itself. Should I make an appointment with an Apple Retail Store?

  Strange, strange! This mysterious line disappeared miraculously se today!

  I am delighted, but at a loss for why it appeared and why he disappeared.

  The only idea I have is THAT HEAT could have something to do with it.

  I look forward to any comments on this mystery.

• Photosmart 7515 adds lines from bottom of the scanned image

  My photosmart 7515 started just add a line double about 2 inches from the left edge of all of the scanned images. NO modification of the system that I am aware. Prins computer or internet as usual. Any ideas?

  Hi Bobvan1,

  Welcome to the Forums of HP Support! I see when you scan with your HP Photosmart 7515 he started to add a double line about 2 inches from the left edge.

  I would like that you start here: vertical, lines or streaks in the Copies or Scans, please fill ALL troubleshooting steps, focusing on cleaning.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP all-in-one C310 printer prints the first line of text from the top of the page

  My printer worked fine for 2 years, then suddenly this week... the first printing line is missing! The first line of any text is printed only on the top of the book and at the bottom of the sheet, there is a gap between the last line of the text and the bottom of the paper. I.e. the printed text is not aligned to the Center vertically on the paper. I tried to shift from the printer and also restart the PC, but is always the same. She's also from any source print - Word or IE for example. I checked all the options of the printer and the settings of applications - everything seems OK and everything said A4 paper for example. What could be the cause of this please? I'm in Windows 8.

  No problem.  I'm happy to try to help.  I sent the steps to your Forums box.  Follow carefully and let me know how it goes.

  Good luck!

• Dotted lines of white on the printed work of InDesign.

  Hi, I have a form of vector with a shadow shadow & internal drop made in InDesign, it keeps printing with these white dotted lines through them.

  

  I tried making it a pdf file and import it into my identity document, which in fact eps, tiff, png and I also tried the overprint option in the menu attributes.

  Any help would be appreciated! Thank you!

  The lines run horizontally when the page is portrait. In the landscape, the lines run vertically.

  If the lines are in the same place on the image then it is likely an artifact of flattering. Try to make a custom preset that forces rasters and use that in the InDesign print dialog box. Something like this: