Speed of the network on the RN102

Similar Questions

• If I devices 802.11 g connected to my network or it will they drag down the speed of the network?

  I have an 802.11n network with more Sonos speakers on this topic. They are only compatible g. I had someone me say that with g on network devices would limit the speed of the other devices on the network to g speeds.  It looks like crap, but I wanted the opinion of experts.

  Not at all the crap. With less capable devices (when they operate) will affect the overall bandwidth of your wireless network.

• (Redirected) Speed of the network card

  How can I find the "speed" of my network card?  Looking at the Device Manager I can tell that the manufacturer, Realtek, but I am trying to determine if I have a 100 mb or end adapter.  My Bill does not or it is displayed in the system configuration page.

  Any help would be appreciated.

  Thank you!

  Better to post this in the networking, Internet, forum of wireless, here:

  http://en.community.Dell.com/forums/3324.aspx

  Bev.

• VM network transfer speeds are two times faster than the speed of the physical network

  My stats from the server:

  HP Proliant ML110 G6

  Intel Xeon X 3440 @ 2.53 GHz

  8 GB RAM

  1 Gigabit NIC onboard

  1 PCIx dual port Intel Gigabit NIC

  1 1 to Seagate HARD drive (for virtual machines and ISO storage)

  4 1 to HP 7200 RPM hard drives

  ESXi 5.5 U2

  Network:

  Belkin AC1200 F9K1113v4 Gigabit router

  Computer:

  Sony Vaio i5 2440 M, 8 GB, 5400 RPM HDD

  The main objective of the ESXi server should be used as a NAS, but with the additional ability to run Windows or Linux VM casual as a game server.  I currently have Open Media Vault controls 1 to 4 hard drives in a configuration RAID10 of software with a plugin SMB/CIFS to provide access to the shares through the windows.

  Network management is through the card on board.  OMV uses its own port on the Intel network card.

  The problem:

  Transfers of networks (upload) to my Windows 7 PC to NAS OMV are slow (average 40MBps).  Playback speed (downloads) of SIN is about 100 Mbps, which is decent.  I tested the disk write speed using the hdparm since the console command, and they are all on average 110 - 130 Mbps.  Why is my computer so slow transfer speeds?  Is there a setting to ESXi which limits my network connection?

  Some things I noticed:

  If only I start a computer Windows 7 virtual on ESXi VMNetwork, my transfers from the Windows 7 VM to the NAS VM on average 105 MB/s, while the playback speed is around 90MBps.  If I could get my physical network to transfer at these speeds, it would be satisfactory.

  Can someone help me?

  Hello

  I presume that the OMV is the culprit here. See for example this discussion: http://forums.openmediavault.org/index.php/Thread/5507-Extreme-slow-samba-speeds/

  You may be able to resolve the server Samba inside the OMV.

  cykVM

• The network speed of the iSCSI to the SPs software

  The speed of the network are the same of the NIC on the ESXi hosts through the switch to the storage? I have currently 1 GB NIC on ESXi hosts will the Nexus switches then 10 GB of the Nexus switches to the SPs VNX.

  Thanks in advance.

  It doesn't have to be equal from end to end.  However, if it is not, of course you will be limited by the performance of the slowest links.

• Slow down the speed of the network with windows Guest OS

  Hello, I want to start and say I'm new on esxi environment and built a white box at home to get a virtulazition experience. everything works perfectly, but the only problem is when I do the speed test between vm machine connections network physical I get good flow. When I run a test of iperf (comp A, iperf s < - iperf - c model B) between the virtual machine ip address linux to linux vm I get 3 Gbps even for vm linux on a physical computer regardless of its fine operating system. the problem is windows VM Windows VM any version of windows (win 7, win Server 2008 or 2012) iperf speed is 12 Mbps and maximum 80 MB/s, but when I do a physical Windows VM OS iperf test I have avg 670 Mbps. when I do a test of iperf with option - l 65535 I get high speed between the virtual or not windows operating system. My settings, it's that I have pfsense installed within esxi on a map as the router e1000. I vcsa e1000 card I have all the vmxnet3 windows (best debit) card and all the linux e1000 map. all switches are on auto negotiate, all the mtu to 1500. all VM have active VMCI. I searched on google for varies responses that I've changed in a vm windows 7 test parameters of network such as disabling it TSO disabling all offload more of tcp / ipv4 hopeless settings. If anyone can help me improve my speed of network between the virtual machine vm windows would be great or redirect me to a place where they could have the answer to my question that I might have missed. Thank you

  Make sure that the network adapter uses vmxnet3. Check http://kb.vmware.com/kb/1009517 please ensure that the following settings are made according to the link: https://gist.github.com/mcantrell/5094393

• Speed limit of network in the workstation?

  Do you know if there is no speed limit of network between the virtual machines running on the same workstation to Vmware? I think remember something about say 1 Gbps as maximum, but if virtual machines can provide throughput more - it will go by?

  Do you use bridged or one of the networks vmnet1 hostonly or 8

  hostonly networks are limited only by the host CPU resources

  But anyway - Gbit network is much faster than anything that can manage virtual disks

• Try to change the speed of the card network disactived he... How can I active it?

  I tried to change the speed of the network card and who does not. So I am not able to connect now by customer. It is a dell T410 server and I don't know how I can activate the card again

  Hi ALPValence,

  You need to change back to its original console setting. Take a look at this KB on how to do it.

  It will be useful.

  Concerning

  Franck

• Cannot change the speed of the WiFi with WN3000 Extende range

  Hi all

  I try to change the speed of the WiFi after successfully connecting to the WiFi network original and extending it with the WN3000. But the drop-down list is blocked. When I connect to the network original WiFi directly speed is up to 300 Mbps, which is why I thought I could also change in the range extender.

  

  Any idea?

  Thank you!

  Daniel

  Hello danaldo

  Then, this is why he is not allowing the 300 SBM because your main router is out which and the Extender that will reduce by half for all the devices connected to the Extender but not if they are on the network from the router. Here is a good article explaining this.

  https://www.repeaterstore.com/pages/WiFi-booster-Repeater-Extender-differences

  DarrenM

• Speed of the Ethernet USB adapter

  Hi guys, this is my question.

  I recently switched to a network of 300 Mbps, and I noticed that my wireless and ethernet controllers (RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC / network RealTek Semiconductor RTL8188E Wireless LAN 802.11n PCI-E adapter) have a maximum speed of 100 / 150 Mbps.
  Can I buy an adapter USB Ethernet Gigabit(e.g. this one) for better performance?
  Can I change my wifi controller with

  I think 300 Mbit/s is the speed of the internet data outward, the WAN connection. I'll take the side LAN is gigabit ethernet, and Yes you can get near that speed using a gigabit usb adapter. The gigabit usb adapter will allow internal (LAN) transfer of data to somewhere between 5 - 10 times faster than fast ethernet.

• "The internet connection speed" Vs "the speed of a wireless adapter.

  Hello

  I'm subscribered of a DSL with a speed of 512 Kbps (kilobits per second).

  However, when I tested the speed of my internet connection with a variety of Web sites, the speed of a wireless router test while wirelessely connected to a wireless router, I have not found any speed of 512 Kbps.
  What I found is shown on screenshots below to test the speed of connection to internet Web sites.

  

  

  

  As a result, my question are:

  First: What would be my answer if I asked about the speed of your internet connection is? Is there a difference between the speed of a LILY and the speed of an internet connection?

  Finally: In the screenshot below, the speed of the wireless adapter, I think. If so, what advantage is there this speed?

  

  Traditional math units go up (or down) in thousands so yes 1000 K = 1 M. computers have slight variation because in some cases, it is 1024 but the difference is not significant.

  The A in ADSL is asynchronous for the upload and download are not equal. As that data consumer is not serious to you, everything you send upwards is requests for web pages where are small compared to the downloaded pages.

  European providers stuck to the same speed of upload years even if the download rate has increased.

  One of the problems we have is that there are people like you stuck at 1 / 2 Mb/s using systems designed for multi-Mb of Microsoft networks.

• Speed up the connection

  I need to speed up the process of connecting on our computers.  I'm managing a computer lab studying in a school.  Because of certain security measures, when a user disconnects, restart the computer, and the local profile created for that user is removed from the local hard disk.

  Now, I did a small test with a stopwatch, and I found when the first person connected after a reboot, it takes x amount of time.  When the second person connects, it takes about half as much time.  Due to the necessities of our environment, the system restarts is log off, and that each person's connection after a restart.

  Thus, it seems that several things start when that first person connects.  How can I get these things occur when the system reboots and not wait for the first person to connect?

  Hello

   

  Are computers on a domain network?

   

  When the closed user reboot the computer and the user profile is deleted from the hard disk, which can be maintained by an administrator.

  Also, there are some startup items different for different users that slow down the boot process.

   

  So, I suggest you to connect with COMPUTER or school system administrator for assistance.

   

  Thank you.

• Is the speed of the vNIC material?

  Is the question - how fast the belives of guest operating system that has the virtual NETWORK card? As, the vNIC is belived to be a 10 Mbit/s or 10 Gbit/s, which will affect the actual speed of the network packets that can be sent and received?

  For example, I saw the VMXNET3 sometimes is considered a 1 GB and sometimes 10 GB in Windows 2003 server.

  The vNIC will work as fast CPU allows it. He is not related to the speed of the physical network as long that packages only affects the physical card.

  There is one exception and that's the former "vlance" vNIC type, which emulates an AMD PCnet32 card. It only works with 10 MBit/s.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How can I speed up the load time of my site?

  Hello

  How can I speed up the load time of my site hosted on BusinessCatalyst.

  http://www.PW-energy.co.UK

  Is there a way to compress?

  Any help much apprecated.

  Thank you

  Hello

  The page/site seems to load very well at the moment.

  However if want to inspect what could slow down the loading of your page I recommend using 'firebug' and select the 'network' tab to follow every chronology file loading.  Then you can see which file takes more time to load to help make adjustments accordingly.

  

  http://getfirebug.com/

  Kind regards

  -Sidney

• What is the speed of the hard drive of the 2015 2 and 3 to merge disks partition?

  I was looking through the Apple site and was wondering about the speed of the drive in the iMac in car merger. On their site it says that the 1 TB Fusion drive has 24 GB of Flash memory, and 2 models to and 3 to have 128 GB of Flash storage. But it does not say what the speed of the hard drive partition, which is what I want to know. It is 5400 RPM, or even 10000 rpm or 7200 RPM? I don't know, but I want to know. If anyone here knows the answer to this question, I would appreciate a response. Thank you.

  I have seen it reported that the Fusion drives are all 7 200 RPM.