Spiderman Shattered Dimension Blackscreen issue

Similar Questions

• XPS-200 [and Dimension 5150C] memory addressable issue...

  I have a question on a very old PC - Dell XPS-200, Intel D 820 2.8 GHz, BIOS A07 - I am fixing to the top for a friend. Windows 7 Professional installed a 64 bit version of the operating system and properties system reports it as a 64-bit system. However, it shows that, although 4 GB of RAM is installed only 3.2 GB is used which is a message that I expect to see on a system 32-bit.

  As the Council and the processor are both 64-bit components I am at a loss as to why he is not seeing all of the 4 GB of RAM. There use a graphics Radeon HD 5450 and BIOS is set to allow only a very small amount of RAM so I don't think that's it.  According to the Intel chip plug the CPU has a 64-bit set statement and supports the extensions of physical memory on 32-bit, which allows him to address more than 4 GB.

  It seems to work OK and I know that if push comes to shove I can install a 32-bit system. But I understand why it is not recognizing all of the RAM and if there is any kind of patch/fix/update available for this machine that allows him to recognize all the 4 GB of RAM.

  When the XPS-200 [and Dimension 5150C] was introduced at Christmas 2005 were not a lot of choice of 64-bit hardware, so it came with a 32 bit OS, but I see he got an update of the BIOS in January 2007 which I would have guessed had to add extra CPU/RAM support but I can't find anything that describes what the A07 update was intended to do.

  Other suggestions from trash, use 32 bit, etc - I already understand these options :) - I hope that someone has enough technical familiarity with this machine/architecture to respond definitively to know if there is anything I can do to get it to recognize all the 4 GB of RAM.

  Thanks in advance for your help,

  Howard
  Redmond, WA

  PENTIUM D 945 chip sets not 5150/E510.   However, it will work well for 64-BIT windows 7 8 or 10 in a precision 380.

  Full 4 GB or 8 GB is fine precision 380 with 955 X chipset.

• EPMA 11.1.2.1 dimension build from FlatFile to EPMA to EssbaseASO using ODI, Member, sort order issues

  We build our EssbaseASO cube using FlatFiles this work who are pushed to EPMA via the interface tables, EPMA Essbase app then is deployed to Essbase, everything is done through an ODI/package interface. The problem I am facing is the order in which members in EPMA appear, even if the FlatFile has the right, sort, at the time where that hierarchies are in the table of interface EPMA that the sort order is changed at random.

  I use the file SQL control add IKM in ODI and somewhere on the way I saw a suggestion to add a new option to insert "ORDER BY" in the IKM. I did it successfully and it has changed the sort order, but is not the correct order (the order in which my flatfile has the dimensions).

  I do not understand why Oracle/ODI needs to randomize the lines without being invited to do! Please let me know if anyone has faced this problem before, and if they have managed to solve.

  EPMA interface tables have a SORTORDER column. Make sure that it is filled with numerical values, sequencing of the order that you want your members to appear in the hierarchies of EPMA and when you import tables interface that this order will be respected. Prior to this function being introduction workaround was to create a view that references the tables interface imposing the required ORDER BY clause, but this is not necessary in 11.1.2.1 just use the SORTORDER column

• Systematic issue of Dimension 5100 hard drive replacement

  I have a trashed h/drive and have ordered a new 250 g sata drive.  After that I installed, what should I do?  Format? loading XP?  the m/Board will recognize?

  Thanks for any help

  
  

• Dimension E510 CD/DVD Drive issues

  I am trying to burn a slide show and I am unable to burn it to a DVD. When I put it in a DVD player, that nothing is happening. I tried a few different brands/types of DVD and still nothing. I tried many things to try and distressed but still nothing. Can someone help me?

  
  

• Lenovo IdeaPad Z580 - delay issue - help

  Hello

  I have a problem with my Lenovi Ideapad Z580. Below you can see the hardware specifications.

  My problem is that this laptop is trolling (freezing) whenever I run movies, listen to music, youtube, basically while doing anything.

  It happens randomly, lasts only for a few moments (like a sound of frying). I do not have to restart the computer, but it's very annoying and concerning, in particular because that machine is only a few months old and I would say, very powerful.

  Just to give you some information regarding what I tried so far:

  -J' checked the processes in the task each time that takes place behind Manager > I have not noticed any problem. I mean, use of CPU, disk use etc. are all aged 30-40-50% (if not less)

  -Check if the laptop is overheating - 100% not the case, laptop is cold temperature. I had a similar problem on my old Acer that was overheating, so I would like to know if this is the problem

  -J' ran virus scan-let me say that this computer came installed with security McAffee, I turned off and installed Avast (free), I read that McAffee can cause the problem of wireless connection (that I had also...)

  -Updated Nvidia card drivers

  Any help, advice would be appreciated, I'm getting more and more concerned about this issue.

  Lenovo
  Weight of the order of the day	6-2. kg
  Dimensions of the product	25 x 37.6 x 3,3 cm
  Batteries	1 battery batteries not required standard. (included)
  Model number of point	M81GCUK
  Color	Gunmetal
  Screen size	15.6-inch
  The processor brand	Intel
  Type of processor	Intel Core i5
  Processor speed	2.5 GHz
  The RAM size	8 GB
  Computer memory type	DDR3 SDRAM
  Size of the hard drive	1000 GB
  Graphics card description	1 GB Nvidia
  Type of graphics RAM	VRAM
  Size of Ram graphics card	1024 MB
  Operating system	Windows 8
  Weight of the lithium battery	1.4 kg

  Hello

  I'm still not completely sure, but it seems that my problem can be solved. I keep will monitor the situation and meet again in the coming days.

  I read everything I found on this topic (late) and found some additional advice on what could be done and I tried all the:

  -Downloaded video drivers (Nvidia and Intel) support from Lenovo (the last time I think that I've updated only Nvidia)

  -Plan of energy change / mode, from balanced to High Performance

  -Option used to remove dust from the fan (fron Lenovo Energy Management)

  -Computer reloaded

  After the steps above, I looked at a few hours of videos and I have not experienced any slow response, I just hope that it will stick.

  As I said, I will come back in a few days with your comments.

• Windows Server 2012 RC continues to request a Blackscreen order

  I just updated my beta Windows Server 2012 at the latest.  He keeps asking a command.  Is it that I should give, or is it possible to use it without doing this?  I can't to desktop Windows Server screen.  The blackscreen border said Administrator:C:Windows\system32\cmd.exe\Alternate Shell Setup.  It is said also sometimes runonce-front replacement Shell Setup.  The heart says C:\Users\Liz >

  Hello

  I suggest you to report the issue in the TechNet Forum: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/threads

  Thank you.

• Dimension figures of precision measurement

  Is there a way to reduce the number of digits of precision or number of digits? It's really annoying to have these really long labels like 16,500000 and 8,200000 mm mm. There could at least be a "hide zeros" and maybe a 'minimum number of figures' field as LabVIEW?

  Hi Ryan,

  There is no option to control the significant digits for the dimension, I would ask to R & D to focus on this issue.

• Dell Dimension - autostart

  I have Dell Dimension 8300-hard drive crashed - has replaced the hard drive and installed Windows XP - when I started the computer I got a screen that says something like "not detected hard disk and press F1 to continue or F2 to go into the settings"-pressing F1 booted windows and everything worked fine, but the next day ". , start the computer itself without pressing me the Start button-It kept making it (start automatically the next day) - I posted the problem on the forum and got very good advice - I was referred to http://support.microsoft/kb/320299 ("Windows XP restarts unexpectedly or restarts when you shut down the computer") - followed the recommended steps (went to properties (, failure of the system and authorized page button "Automatically restart") - it does not help-Got tired and took computer to fix the store (Microcenter) - has asked to wipe the hard drive, format and install Windows XP - they formatted the hard drive and installed Windows XP - brought the computer home and there worked - the next day he started on his own as he was Cleared before the button "automatically restart" - didn't help-Can someone please tell me if It is a software issue or a hardware issue or what is the problem? Why it starts to him only after that I stopped it? I tried to shut down the computer, press the switch to start manually or by clicking on the button "shut down the computer. Nothing works.   Thank you

  FTP://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-8300_owner%27s%20manual_en-us.PDF

  your manual, what say the diagnostic lights, section 3 tells what these lights mean.

• Dell Dimension-Auto start

  Have a Dell Dimension 8300 - I replaced the hard drive and installed Windows XP - having some problems, but difficult to understand is automatic start - after I turn off the computer (be it by pressing the switch startup or via windows Shut Down) the next day, as the computer starts up on its own.  Anyone had this experience? An idea as to what could cause this? Thanks for your help.

  Hello

  Welcome to the Microsoft Community Forums. We are happy to help you with any problem related to Windows.
  Description of the question, we understand that this computer starts automatically.
   
  If you could answer a few questions that would help us resolve this problem:
  1. don't you make changes to the computer before the show?
  2. do you get an error message?
  3. can you describe us exactly, what do you mean by "computer starts up on its own?
   
  Here are some links that you can follow to resolve the problem:
  Windows XP restarts unexpectedly or restarts when you shut down the computer
  http://support.Microsoft.com/kb/320299
   
  Windows XP restarts when you try to shut down your computer
  http://support.Microsoft.com/kb/311806#top
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows
  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Dell dimension windows xp restore fails to halfway through the process

  I had to change the video card that came with the reference dell dimension e510 has failed... Bought a new pc so was going to do a total restore back to settings during the windows xp loading & factory used the cd he couldn't got a failed error message using the usb ports then unable to use the keyboard than point & cannot go further... Help

  Hello

  I recommend you contact Dell support for assistance on this issue.
  http://en.Community.Dell.com/?~CK_=_mn

• No audio; possible driver issue. "There is no available mixer devices."

  I can not play sounds on my computer: no CD, no mp3s, not iTunes, no system sounds, nothing. When I try to open my sound engineer (Volume control), it gives me the following error message:

  "There is no mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware. This program will be closed. »

  I tried adding hardware, uninstall and re-install my drivers, check the physical connections and power cords, restart, and ensure all relevant in services.msc is set to automatic. Nothing did. Many devices (under audio, video and game controllers) device displays Manager works not properly: Audio Codecs, Legacy Audio Drivers... SoundMAX Integrated Digital Audio, etc. When I check the properties of these devices, it gives the following message appears in the status of the device (general tab):

  "A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32) »

  They are activated, the only problem seems to be one or more drivers. But the update does not resolve the problem and troubleshooting of Windows doesn't help.

  I worked with someone in the Bleeping Computer to remove malicious software, and we have identified a few days that my machine was clean. The tech who was helping me said the audio problem is a separate issue from malware, but I suspect that the malware could have damaged something or change my settings. I thought it might have been accidentally caused by my use of AutoRuns (a few hours before I noticed the sound problem and in the middle of the 9-day process to remove malware) to disable malicious programs which were auto-loading, but I can't find anything that looks related to the sound that is not set to automatic loading at startup.

  I noticed in AutoRuns, that the aeaudio.sys driver is set to auto-charge but it says "File not found" in the Path column. I checked the system32 folder and it wasn't there at the beginning, but then I found the file in two other folders and copied in system32, yet AutoRuns still says it is not found. I tried to reboot to see if that would refresh but he says always not found. Also, I can't see how a problem with a driver (aeaudio.sys) that filters background noise (during the recording of the sounds, right?) can knock out all my audio.

  I have studied this problem for days and that you can find no answer to the problem. Help, please.

  Data sheet:
  Windows XP SP3
  Dell Dimension 4600
  Card isn't his SoundMAX Integrated Digital Audio

  msecox,

  Bad news: the problem is hardware, not software. I tried to install a new sound card, but it turned out that the part of my motherboard that sound control has been fried. Also, you may want to replace the sound card before condemning the audio controller. If this fails, your best bet is to replace all of your PCs, because a new motherboard will cost almost $200 (in addition to work if you can not install it yourself).

  Good luck!

• No internet connection on Dell dimension 300 xp

  Original title: Dell dimension 300 xp

  Just installed the netgear and says I am connected to wifi in our region, but internet Explorer will not appear I missed something

  Hey ajajanine,

  You get the error message after opening Internet Explorer?

  The following articles could come in handy with regard to this issue.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blackscreen while watching movies on Netflix in Vista

  Original title: I use to watch Netflicl instantly on my Pc, now I can't. It shows a black screen and says error. Help
  What can I do to get my Pc to read Netflick movies instantly again? I get a black screen, no sound or picture. He said: error. Help

  Hello

  1. What is the exact error you get when you open Netflix?
  2 do you have the blackscreen watching videos or playing games on your computer?
  3. don't you make changes on the computer before the issue started?

  You can follow these steps:

  Step 1: Look for the error logs in the event viewer.

  Open the event viewer on your computer and check the error logs. Message of the error logs here so that we can find out what is the cause of the problem.

  See this link for more information about how to open the event viewer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Step 2: Uninstall and reinstall the Silverlight player.

  See this link for more information about how to uninstall a program:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Download the latest Silverlight version from this link:
  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Upgrade of dimension 5000 with 1 GB of video

  I have an old Dimension 5000 here which was a Euro version 5100/5150/E510... series date back to the time. It still does a life more decent job running Windows 10 for anything games, so internet, office light etc...

  Here's the question: it was once upgraded with a 512 MB GeForce MSI slot PCI-E x 16 without problem. Trying to run a 1 GB card but turns out to be a problem.  Tested both until this new Geforce GT 710 - a passive MSI and a PNY with cooler fan - would cause the machine to Rev up the fan on the CPU for a few seconds before posting the "alert!" PCI Express card works in X 1 mode"message when starting. After hitting the F1, everything is normal. They are still rising 'usable memory' under Windows/System, which was one of the goals of this upgrade.

  Re-seating cards several times into the slot has not made a difference. The machine has the latest BIOS v07 and has been improved with a peak of 350W/400W PSU.

  The theories here? I do not understand why there is a compatibility issue with the 1 GB cards.  I noticed minor differences in the provisions of the PIN between the 3 cards, but they are all designed for any compatible mobo PCI-E with a x 16 slot.

  TIA

  Several versions XFX have heat sinks that are TOO LONG and TOO FAT to physically enter the case.

  Asus units adapt to all dells except USFF which has no slots.