Dimension E510 CD/DVD Drive issues

Similar Questions

• Dimension E510 crashed hard drive

  I have several questions, but here's the gist: I was working with an excel file and tried to print; He then hung up cancelled; somewhere trying to cancel the printer (Epson printer) print job starts to uninstall (I'm sure that I clicked on something by mistake); tried to cancel and computer froze. could not get to respond to orders to cut the power. waited a minute and started backup but it won't start windows. When I power on I get the Dell screen then page with dell.com in the blue band at the top with the message: «loading PBR for descriptor 2...» fact A disk read error occurred

  Press Ctr, Alt, delete to restart; It's just a loop; can get into set up and start menu; cannot start in safe mode; in the boot menu when I run a diagnostic on the hard disk, the message I get is:

  Disk 0: ST380819AS - failure. Return code 7

  Drive 1: no device

  Disc 2: TSSTcorpDVD-ROM TS - H352C - Diagnostics not supported

  Disc 3: HL-DT-ST-DVD +/-RW GWA4164B - Diagnostics not supported

  Full test

  If I try to boot to the utility Partition I get

  Loading PBR for descriptor 1... fact

  DRMK Version 8.00 loading...

  DRMK Version 8.00 [build 00007]

  Copyright (c) 2005 Dell Inc. All rights reserved.

  Error is not ready reading drive C

  Quit, retry, fail?

  I ordered a new hard drive, but I really want to recover the data on it. Also, while trying to understand this point I find I don't have my Windows XP disk because my system apparently does not require one.

  I have the CD resource but that you have not understood how to boot from it.

  Is it possible to save the data on that hard drive?

  And when I get the new drive how to get windows XP LOADED on this subject?

  
  

• My DVD drive icon is missing on Windows 8

  Hello. I'm having a problem with my computer. The computer I'm using is a Samsung NP355E5C. The problem I have with my computer, it's the DVD drive disappeared from the folder of the computer. I've tried everything to fix this problem, and none of them worked. Could you help me find a way to solve the problem?

  Thank you.

  Hello

  Check with Samsung Support, their drivers and documentation online and ask for their
  Forums about known problems.

  Samsung - Support - click on 'laptops', ' All in one ' or any other link appropriate
  http://www.Samsung.com/us/support/main/supportMain.do

  Samsung - visit your country Site
  http://www.Samsung.com/us/common/visitcountrysite.html

  =============

  If necessary check-

  From the desktop, or use the WINDOWS key + X - run - type RegEdit
  OR place the cursor in the lower left corner of the office - right click - path - type in
  RegEdit.

  Click on the plus sign (+) next to the following folders

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class
  \{4D36E965-E325-11CE-BFC1-08002BE10318}

  Right click on the key in the left pane - export so you can reverse in the case of an error.

  Save as Remove - Filters.reg (any name is ok with .reg extension).

  In the eyes of the right pane for one of these = UpperFilters.bak UpperFilters - LowerFilters.
  -LowerFilters.bak

  If so right click on them - delete
  (There may not be one any of these and if not is not the solution).

  Close RegEdit

  Reset

  If you have no need to file .reg you registered then you can delete it.

  --------------------------------------------------------------------------------------------------

  From the desktop - WINDOWS key + D while on the screen start to access the desktop:

  WINDOWS key + X or build the mouse in the lower left corner right click and corner - command prompt (ADMIN)

  Enter it below (or COPY and PASTE):

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  RESET
  (from AtishayMSFT)

  ==================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dimension 8400 will not start up cd or dvd drive

  Hello

  I have a Dimension 8400 that refuses to boot from the CD or dvd drive. In the bios, tried to move 'Onboard or USB CD-ROM Drive' to the first position in the boot sequence. Also, I tried pressing "f12" during startup to access the start menu. I tried to select the "integrated or usb cd-rom" option from there with a cd bootable in both drives and still have had no success.

  Any help will be greatly appreciated, thank you.

  I also have the same problem.  Do not understand why Dell does not address this issue.  Trying to recharge a system using the Dell restore CD and have two CD drives in the system provided with the system and will not start to :(

• Help! Problem installation internal Dimension E510 w/Vista Pioneer DVD/CD burner

  I recently bought a DVD/CD burner internal Pioneer (model DVR-1910LS) to replace the current CD Sony DVD burner.  Clarification on the pioneer can burn CDs and DVDs but my Sony Burns only CD

  I removed the My Device Manager Sony Reader, shut down my computer and installed the new drive Pioneer.  On reboot, I get the following error message:

  "Drive 3 not found: Parallel ATA, PATA-1 (PRI IDE slave)."

  Press F1 to continue or F2 for Setup. »

  I have to press F1 to continue, to go back to my device manager and click with the right button on my storage looking for new hardware devices.  It detects the new Pioneer device and takes about 10-15 min. to install drivers... don't know why it took so long but good.  However, when I go to 'My Computer', or my new Pioneer drive or my standard CD-ROM player appear on the screen.

  At this point, I try to do a reboot to see if that will pull up the readers once again, but my computer is still frozen on the "shut down" screen for about 1/2 hour.  Then, I don't have a very wide power and back on but now the Device Manager does not recognize ONE of my DVD or CD ROM drives and still does not appear on "My Computer".

  I reinstalled my Sony and which still works fine, but I really need the ability to burn DVDs on this new device.  Can someone help me?

  Also, I got a Dell Dimension E510 out of Windows Vista.

  
  

• Are Dell DVD (driver installers) Dimension E520! Not authentic?

  Are Dell DVD (driver installers) Dimension E520! Not authentic?

  David Brown snr,

  Dell uses Dell OEM operating system disks.

  When you installed Windows 7 (32-bit or 64-bit) have you installed the utility of desktop / laptop and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order If you can't find the drivers for Windows 7, then try to use Vista (or XP), 32-bit drivers for Windows 7 32-bit to 64-bit Vista (or XP) drivers for Windows 7 64 bit and install the drivers in compatibility mode.

  Rick

• Being not recognized in dimension 8400 DVD drive

  Hi all

  I have a problem with my DVD drive in my dimension 8400 (about 3 years)

  I can open the DVD player and insert DVD/CD but they are not recognized,

  My computer is not present DVD player, there is no CD/DVD players present also in the management of devices.

  I think the DVD player I have is the Philips DVD 8601 HH 16 x DVD + RW,

  I had a similar problem about 1 year ago, but that has been fixed by updating the firmware/drivers. (although the DVD player doesn't "disappear" from my computer, it comes to refuse to play the disc at the time)

  Im not a computer newbie, so I tried several things to try to make it work:

  http://www.dellcommunity.com/supportforums/board/message?board.ID=dim_cdrom&message.ID=138730&query.ID=270189#M138730 I did steps 1-3 and 5, and nothing has worked.

  Someone at - recommended step 4 too? Question about step 4: you have to clear the CMOS chip memory AND reset the default settings of the BIOS Setup? It was not clear from the guide on this forum.

  I tried to download the updates of the Firmware, but when I tried to update it says "Device not found", logic, because the device is not - where on my computer.

  That's my problem.

  Thank you very much if anyone can help me

  Perhaps the DVD player is just broken and I need to get a new one, but the fact that I can open and close the lid and the light Burns gives me hope that its stil alive: P

  Concerning

  Rowan Schaap

  
  

• DVD drive on dimension E521

  I bought this system about a year ago and have just tried to use the Philips DVD drive to store backup data files, and I can't make it work.   Device Manager indicates the disk properly and its drivers are up-to-date. The player is displayed on the "My Computer" screen. If I insert a disc, the drive properties appear there a blank disc, but when I double click on its icon to start the format, there is a message "insert the new drive. In another message to the Forum, I read that, despite its name, this isn't a rewrite drive. I tried to look on the Philips site and this model is not listed, so I can't know what are its characteristics. The drive appears on my sheet of computer packaging as "Element #UH898 DVD-ROM, 16 X, Philips, a black Dimension Serial ATA", but I could not find any information on the page of the Dell parts. What is the problem with this picture and what we can do about it?

  
  

• WHILE the error is absent INSTALL WIN 7 I AM facing ISSUE is to say--a required cd/dvd drive device driver

  Hello Sir

  I recently brought lenovo s20 nootbook laptop with win8.1. now I want to change it for win 7 but at the start of the process, I am faced with the question IE a required cd/dvd drive device driver is missing error.

  Hi Kothalanka,

  We are there to answer your concern about the installation process of Windows 7 .

  Here are the following reasons why a required CD/DVD drive device driver is missing error message occurs:

  • The installation DVD is removed during the installation process.
  • A bad quality DVD has been used to create the installation DVD.
  • The speed at which the installation DVD is burnt was too fast.
  • The DVD drive cannot read media.
  • The ISO file is corrupted.

  To resolve your concern, we suggest you use one of the following methods, depending on your situation:

  • Burn the DVD to install at a slower speed.
  • Best DVD quality to create the installation DVD.
  • Update BIOS firmware for your DVD player.
  • Windows 7 USB/DVD Download tool allows you to create a bootable USB key and then use the USB flash drive to install Windows.

  If you still encounter the same error after doing one of the above resolution, here are a few troubleshooting methods that you can do:

  • Run the DVD on another computer to determine if the DVD works properly.
  • Test your DVD player using a Windows installation DVD official.
  • Attach the ISO file to a virtual machine to verify if it is corrupted.

  For more information on how to resolve the error a required CD/DVD drive device driver is missing , click here.

  Do not forget to back up your files by using a storage device externally (for example USB, external HARD drive) before installing Windows 7 , in order to avoid any possible data loss.

  Let us know how it goes.

  Kind regards.

  You can use the mark as answer button, if this post responds to your request.

• CD/DVD Drive missing on my Dimension E310

  I added a second CD/DVD drive to my E310, but now my computer does not recognize the CD/DVD drive that came with my E310. Can someone help me?

  Thank you!

  
  

• CD/DVD drive, causing the Blue Screen of Death stop

  Software from CD/DVD in my Dimension E510 desktop seems to be the dreaded blue screen shut downs - usually as a CD is ejected. The web page error analysis Windows that appears after that restart indicates the problem is caused by a resulting driver. It's the Sonic Digital Media software provided on the system, but sometimes when I run the program I get a warning message saying that the software is not an approved final version? I would like to uninstall the Sonic CD/DVD software which seems to be the cause of the problem and replace it. This will probably solve the problem of the "blue screen", and which would be a recommended CD/DVD operating system that would be compatible with my system. Any suggestion would be appreciated.

  Name of the operating system Microsoft Windows XP Professional Version 5.1.2600 Service Pack 3 Build 2600

  System manufacturer Dell Inc.

  System model Dell DM051

  System Type X 86-based PC

  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz

  Total physical memory 1 024,00 MB

  Available physical memory 479,88 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Drive D:

  Description CD-ROM drive

  Name the HL-DT-ST DVD - ROM GDR8164B

  Manufacturer (Standard CD-ROM drives)

  IDE\CDROMHL-DT-ST_DVD-ROM_GDR8164B___0D08___\5&29A96F35&0&0.0.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Drive E:

  Description CD-ROM drive

  _NEC DVD +-RW ND-3530 name has

  Manufacturer (Standard CD-ROM drives)

  IDE\CDROM_NEC_DVD+-RW_ND-3530A___103C___\5&29A96F35&0&0.1.0 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  
  

• Satellite A660 - do not find external DVD drive

  Hey guys. Newbie displaying in total despair of and needing help! I posted in other forums without success. I bought a Samsung SH-D162D DVD drive in a USB enclosure to connect to my Satellite A660 via USB.

  I can't get Windows 7 to find! When I plug in the USB cable, the ball comes up to say that it has been installed (sometimes), I can see it on for about 1 or 2 minutes then he falls. It is not listed in my hardware or anything. Its not found in disk management or my devices, so it is not a case to change the drive letter - I can't find the drive to change. I also tried to find upper and lower settings in regedit. Could not find them so couldn't remove them as suggested in other posts of this nature.

  It is set to master, the IDE connector and power connectors are very good. Its got to be a cause of problem of Windows 7 it comes very briefly. In the minute or 2 sound, I can't do anything with it. It crashes right although it will open and close. I've google it and can't find anything. Mainly of registry issues, but they did not help.

  Ive also connected to another laptop with XP and had no problems so I know the DVD Rom works very well and all the cables are ok. Ive tried all 4 USB ports on my laptop and also disabled all the parameters of energy. All with no luck. And I also all Windows 7 update.

  This is exactly what happens to the power out of the Cabinet.

  1. I connect the USB cord then turn on the enclosure.
  2 - I quickly click Start, and I can see the DVD Rom E player beside my computer laptop dvd rom.
  3 - the green bar above starts to fill to the top, from left to right and gets to half way then suddenly disappears icon of DVD Rom and makes the green bar.
  4. He then flashes up in computers laptops DVD Rom icon with a player of Local E drive, but only for a fraction of a second.
  5. sometimes a balloon comes up saying peripheral installation, then the installed device successfully... but not every time.

  And that's all. I'm at a total loss and the cant work, so any help is really appreciated!

  Hi Smee,

  So if you have already connected the external hard drive on another computer, and it worked correctly, it seems to be a driver or compatibility between your external DVD drive problem and and your Satellite A660

  It will be connected to the port USB then you tried to remove all the USB ports on the Device Manager? After that, you must restart your computer and the USB ports will be recognized automatically from the Device Manager. In addition, I would also try updating the chipset driver. New version, which you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you also tested other devices on your A660 if they work properly?

• Re: Cd/DVD drive problem - code error 39 on Satellite P series

  Hello

  It is my first request for assistance.
  My CD/DVD drive is most recognized, and when I go to Device Manager and click on CD/DVD I'm informed that the cdrom.sys file is there but cannot be loaded.

  An error number 39 is reported.
  Any advice would be greatly appreciated, but please keep things simple to the actions of a single line if possible.

  Of course, you can get a few tips ;)
  I think you might find faster if you are looking for first in the forum, but I'll try to help you too.

  He error code 39 is very common issue and can be resolved easily.
  See this MS knowledge base article:
  http://support.Microsoft.com/kb/314060/en-us

  So first of all remove the CD/DVD drive device manager.
  Then access the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait until the CD/DVD drive has been installed again.

  That s it. ;)

• Equium A100: CD/DVD drive wont read - D:\ error message is not accessible

  Hello.

  My cd/dvd rw drive will not read certain DVD/CD-ROM. I bought my equium (A100 I think) laptop, nine less than a year ago and have had this problem since I got it. The disk which do not work on the laptop work fine on another pc / dvd players, if the disc is not defective. At first I thought that it would be a driver issue because some of the disc worked fine, so I never got the laptop back to the store I bought.

  A message appears "D:\ is not accessible. The request could not be performed because of an i/o device error".

  I recently just got internet installed in my house and I went to the toshiba site to see if there are newer drivers that would solve this problem. I downloaded a bios update and an update of dvd ram and installed, but am still having the same problem.

  Can someone help me cause am totally stuck on what to do now.
  Thank you.

  Hello

  As you have probably not known the CD/DVD drive support not all backgrounds.
  In the user manual, you will find a list of supported CD and DVD

  But I assume that you are the reader cannot read certain media because of the impure registry as this other thread mentioned:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  Please check that the user holmdps has solved this same problem.

• How to format Satellite A60 302 without using the CD/DVD drive

  Hello

  I have a laptop SATELLITE A60-302, and I had a problem with cd player. I want to format the computer (WIN XP) and I wanned to ask if I can format the computer not by the cd player but another way as disk on key or something...

  Thanks :)

  Hello
  Your best bet might be trying to use an external CD/DVD drive to install Windows XP (must confirm that your laptop can boot from USB CD/DVD). I would not recommend it otherwise because they are pretty complicated and you will encounter other issues.

  Concerning
  Ben