Splitter moved event

Similar Questions

• Error to imovie 11 project external drive

  I try free hd space by attaching a mac format external hard drive and moving projects imovie inside the imovie holding down the cmd key project view. But since the project contains clips with built in audio effects, titles, etc. that is part of iMovie itself (at least I think that's the reason why) it gives error message - 43 say he couldn't move the ringing or the nail. He then shows the project as if it is moved, but restart imovie it is back to its original location again. Grateful for any idea that you could share...

  Sounds as if you do it right, but just to be safe here is a link to instructions by AppleMan 1958.

  How to move or copy projects and events on an external drive? (Version 9 and earlier)

  Note his comment about an error

  For existing projects, you can move it using these instructions.

  http://help.Apple.com/iMovie/#move7d66613

  There is an error in the guidelines where it says drag the icon of the project to the icon in the event library. You should rather look for your hard drive icon in the project library.

  Generally, the event takes more space hd project then you can consider moving events as well.

• State of the mouse with menu items that overlap control

  Hello

  I have a problem with the recovery of the location of the mouse using GetGraphCoordsFromPoint...

  I use the return status of GetGraphCoordsFromPoint to determine if the mouse cursor is over the plot of my graph control area (1) or not (0) to switch between styles of mouse (VAL_DEFAULT_CURSOR against VAL_CROSS_HAIR_CURSOR).

  It works in most cases...

  Above the Panel, there is a bar menu, located below is the xy graph. Now, if the mouse opens a menu and is the style of mouse on the menu (and also on the chart) depends on history of mouse:

  If the mouse has always been above the menu, it is not recognized by GetGraphCoordsFromPoint be loacted in the graph - which is what I would like to see, in this case of the style of the cursor is always the default style.

  Now, if the mouse leaves the menu for a short distance, the menu does not disappear (only if the mouse is to a greater distance) and acccordingly GetGraphCoordsFromPoint realizes that the mouse is over the chart. It is correct and as expected, too. (the style of the mouse is replaced by a sight then)

  Now, if I move the mouse over the menu, it is not recognized by GetGraphCoordsFromPoint, unfortunately, and the style of the mouse is not being in default.

  Am I missing something, or is there a way to fix this behavior? Styles different from the mouse on a menu is confusing for the user, and I would avoid it, of course

  Thank you...

  Hi Wolfgang,.

  It is not a very good way to work around this problem. As you found, Panel moving events are sent to the callback of the Committee even a menu is followed, and when you change the cursor of the mouse that it also affects any menu that can be active at a time.

  If the cursor changes do not at all while the menu is active, even if the user moves on the graph, there is a possible strategy don't mind you can pursue to remedy the situation. It consists of trying to detect if a menu is active, so that you do not change the cursor when the menu is active. Unfortunately, this is easier said than done. Although it is easy to be notified whenever a new menu is activated (via a menu drive recall) there is no right way to be notified when the menu disappears. And there are several ways in which it can disappear. So it is not possible to set an internal flag that tracks when the menu is active.

  However, it is possible to know if the menu is active at the time you receive the Panel move event (or in the timer tick event, although I'm not completely sure why you also use a timer). You can't do it with the UI CVI library, but you can, using the Windows SDK, in a way a little round point.

  The idea is to know which window is the top-level window. And if she is not the window of the Control Panel, then you should be able to assume that a menu is active and therefore refrain from changing the cursor. Note that you must also make sure that the active window belongs to your process, because there could be a number any other windows that might be the 'top' window at any time. But if it belongs to your process and it is not your Panel, then presumably it's the menu.

  I did a quick test with the following code and it seems to work, although you might want to test more thoroughly I did:

  topHwnd = GetTopWindow (NULL);
  GetWindowModuleFileName (topHwnd, topHwndModule, MAX_PATHNAME_LEN);

  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (intptr_t *) & panelHwnd);
  GetWindowModuleFileName (panelHwnd, panelHwndModule, MAX_PATHNAME_LEN);

  If (! strcmp (topHwndModule, panelHwndModule) & panelHwnd! = topHwnd)
  return 0; do not change the cursor, unless the Panel is really on top

  Good luck

  Luis

• The SMA ListBox control, drag and drop reorder?

  Hello

  Is it possible if, in my box, I have a ListBox control on the SMA (Mac OS X) to reorganize the content of this list by dragging the elements around? I was not able to find examples in the sample code, nor any references to a DND API in the docs. Any help is very appreciated. As always, thanks in advance!

  -josh

  No, I'm afraid there is no magical flag

  That said, I think it's a little better than what you have outlined. If you use the MDRI * set of objects, you override just Track (tracker IADMTracker) on the IADMHierarchyListEntry (as opposed to the IADMHierarchyList). If you do not, it'll still be the proc Track() on entry, not in the list, so that you always know which entry of the event began-the easy part. Everything else, basically to do yourself so, Yes. Here is roughly what I do:

  On mouse down, use PickLeafEntry (click) to figure out what clicked. I do a quick check at this stage to ensure that the click is not on the arrow of the expansion, but you probably haven't this problem if you use this for a straight up list box. Determine if the user has clicked entry is draggable; If so, set a flag that says "drag underway".

  Then, when intercept you the moving events, make something similar and determine which input you are hovering above. You can do things like set a flag on this entry when his drawn it looks different. Just make sure that when you hover over the following keep you a reference any to it so you can clear the said flag when you hover over again somewhere else, you want to probably check whether or not the entry in question is a viable drop target and you can attract once again, the entry on different.

  Finally, you enter the high action. Once more, I uses the location of the click to determine who it is and if it is a viable choice (you can always bail if you must!). Can I get a list of selected items and it's my list slipped.

  Now, if you do order it again, you will need to find tune elsewhere a little, since you will probably want to choose your "target" as "seams" between the elements, rather than elements, and you can not use the PickLeafEntry to do it - you can always convert the click for global or local coordinates and use it to know exactly where you are compared to the borders of the entry (for example within 5px or not).

  One last note: scrolling. Ugh, it's a pain in the *. In the action move I determine if I am near the top or bottom of the list and so I begin to scroll in the appropriate direction. I begin to scroll using a timer. I put the enum direction and activate the timer. In the callback, I check the direction and move up to an entry. The thing to do to go faster or slower is to adjust the length of the timer, based on how far above or below the mouse is the edge of the list box. I have a maximum and minimum range for the period, and whenever the scroll of the pulse timer, I recalulate his period and restart (after scrolling). In this way, it speeds up or slows down while you adjust your position. Yes, it's a lot of work, but I must admit, its pretty slick when its right.

  in any case, I hope it helps!

• Coordinated understanding of spaces

  I'm a little lost on the interaction of different spaces coordinated in flex.  I have a two objects, the second object is on the right and at the bottom of the first object.  I want to create a moving event that moves the first object just above the second, essentially centered on it.   Of what I read, I thought this would be pretty simple - and here's the method I came up with:

  var Object1Point:Point = new Point (Object1.x, Object1.y);

  var Object1Global:Point = Object1.localToGlobal (Object1Point);

  var Object2Global:Point is Object2.localToGlobal (new Point (Object2.x, Object2.y));.

  var Object2CenterGlobal:Point = new Point (Object2Global.x + (Object2.width/2),Object2Global.y + (Object2.height/2));

  var move: Move = new Move();

  move.target = selectedRam;

  move.duration = 1000;

  move.xBy = Math.abs (Object2Global.x - Object1Global.x);

  move.play ();

  It puts the object far more right than what it should be - so clearly, that I do not understand how these areas interact.  Any suggestions on how to make the link between these two areas would be appreciated.

  var Object1Point:Point = new Point (0,0).

  The x, y of a component is its position compared to its parent.

• Moved from vCenter 4.0 Db to new MS SQL server - event task Cleanup job

  Last week, we have moved our vCenter 4.0 Db to a new MS SQL Server and instance. I just stopped by VMware, our DBA moved the Pb services, and I've updated the ODBC settings, restarted the services and everything worked FINE.

  However, today my DBA says:

  Below the jobs were provided on:

  Event task cleaning VM_SACWIS_TEST

  Last day stats rollup VM_SACWIS_TEST

  Last month stats rollupVM_SACWIS_TEST

  Spent the week stats rollup VM_SACWIS_TEST

  I asked the method he used to move the DBs and expect from him. I don't think that the DB UpdateManager gave us all grief...

  Thank you.

  (A special "Hi" to David w. in Chicago, my Professor VCP)...

  If the old DB server is always available, you can move tasks SQL Agent Jobs, too.  If this isn't the case, you probably need to re-create.

  http://KB.VMware.com/kb/1004382

• When moving in different time zones, how to keep timely events?

  When I put an event in PST at the exact time in which it will happen and then change the time zone, the event moves to another time. I have not shot time zones. Some events move and others keep time. How can I get all the events to keep time?

  Events are created in the time zone that the Mac is currently defined in support of regardless of the time zone setting. When you change the time zone of the Mac, the events will appear to change the time since they will now display the event in the current time zone.

  Allowing the use of zone:

  • Adds a dropdown in the toolbar menu. You use the menu to change the time zone in which include all events. For example, an event for 12:00 Pacific time is shown at 7: 00 GMT.
  • Also allows you to set the time zone for each event. For example, if you set an event at 7: 00 GMT and then choose Pacific Time in the drop-down list in the toolbar, this event is posted at 12:00

• Moving files from one event to another in the same library

  When I try to move the file by dragging the clip from one event to another, I get this message that "the file could not be opened because there is no file of this type." I have Final Cut Pro X was last updated.

  I find it interesting since when I imported the raw images from an SD card for Final Cut Pro, I copied all the files in the library. I even played the files and they worked.

  I would be very grateful for any answer I can receive. If worse comes to worse, I can always import the images even once to the appropriate event, because I still images raw on one SD card.

  You can post a screenshot of your browser?

  In addition, what happens when you use the reveal based on the Finder.

• Files missing after moving iMovie events from local disk to external HARD disk. Are they lost?

  Hi all

  Tonight, I tried to clear up little space on my local HARD drive and wanted to spend my events/projects of the iMovie local library to an external HARD disk, which I connected via firewire 800.

  I opened iMovie (v10.1 - current version with all updates installed). I clicked on an event to highlight and then the FILE--> COPY OF LIBRARY of selected EVENTS.

  There, I sailed on the external drive and created an iMovie new library called ReWatch2015. I copied successfully eight different events, including files from my external hard drive.

  The ultimate goal is to get rid of them on the HARD drive internal, I highlighted the 20 remaining events I wanted to move and then used the FILE--> MOVE of EVENTS at the LIBRARY and specified ReGen_2015.

  It seemed at first glance to move. In fact, he seemed to move too darn fast in my opinion. When I looked at home in the library of the external drive, they were nothing more than a string of question marks, with a message telling me that particular item is not found and re-import the original clips. It's impossible because I have not kept the original source material on my internal drive. I had asked before if they are preserved in the library of iMovie and told me Yes, so I that's why I deleted the original source material.

  Don't see no activity on the disks, I did the cmd - Z to go back. Events have now shown upward into the iMovie library internal. HOWEVER, they still have the question mark, with msg on reimport. What is scary, is that if I go to ALL projects of them have visible thumbnails. Yet, when I click on any of these thumbnails to load the project into the editor, I am back to the page of question mark again.

  Are the file on drive HARD internal, and they just disassociated projects, or two-thirds of my library of events of 2015 are now toast? I was not under any type of backup Time Machine to be able to recover them, and frankly, if they left, it is not the end of the world since I was of the .mp4 displayed on Vimeo. But, I would just assume the iMovie library intact if possible.

  Suggestions on how to recover are greatly appreciated!

  Robert

  Hi Robert

  Am having exactly the same problem on a new iMac 2016 running El Capitan: when I want to MOVE events such as you describe it, they sometimes get lost in the original library, both in the target library. Like you, I noticed that a such attempt to move just a very short time even if several GB of data play a role. Sometimes however, iMovie is able to move successfully. I my case, I had to re - import events so lost since an additional backup, I got on another external drive that I couldn't find the clips 'lost' on the HARD drive more. Very scary!

  I think it's an iMovie/El Capitan question which could be corrected with future updates. The only solution I've found is to the events of the FIRST COPY, and then check if the target is really OK and only then select the MOVE option, which will remove the original library to free up space. In addition, I plan to copy on a regular basis my library full iMovie on an extra disk to backup using the finder.

  Did you find anything in the meantime?

  Morgy

• Calendar is frozen all moving to server accounts

  Am on an iMac with OS X 10.11.4. In a moment of "who knows what what to think" I unchecked "calendar" from iCloud apps to be synchronized. After realizing my mistake, I checked again calendar. Now the calendar app is 'Moving of the calendars for the server account' and has been for several days.

  I've added a new event on one of our iPhones and he reflects on the calendar on my iPad, but not the iMac. So, I don't think the schedule receives the information from iCloud.

  Anyone have any good ideas?

  Thank you

  Tim

  TBS2,

  Backup your calendars to iCloudand disconnect from the internet.

  Quit calendar.

  Then paste this ~/Library text in the Menu Finder > go > go to folder... window and select 'go '. This will open the folder library users.

  Open the calendars folder that is located in the library folder and move all the files with "Cache" in the field of name on your desktop.

  Then open the Preferences folder in the same library folder and move the file com.apple.iCal.plist on the desktop.

  Open an outbound/inbound session or restart and open the calendar.

  

• "When I load google calendar in Firefox, I get the message" cannot load events, try again later ". Works with IE and Chrome. Worked with Firefox.

  Open Google calendar using Firefox and found only the month of may display events. In the past, it displays dating back several years and moving forward about a year. Then, I got the following message ' Oops, we could not load your events, please try again in a few minutes calendar» I open my calendar Google Chrome and Internet Explorer and found each event displayed normally. I looked at all the blogs help and found no solution. Can you help me?

  I used two bookmarks and typed in the url. But fortunately the schedule began to fill all the events I started my computer for a closed complete. I did a restart earlier but it has not fixed the problem right then. Thanks for your help.

• How to repeat an event every month, and that the event referred to the previous Friday if the event falls on a weekend.

  Company is paid twice a month. The 15th and the last day of the month.

  Defining the last day of the month would repeat each month, day of the last week. But how do you define the 15th with these conditions:

  If the 15th falls on the weekend, it will be Friday before the weekend. For example, May 15, 2016 falls on a Sunday, the event must be moved to May 13 instead. Is this possible?

  Thank you!

  Found the answer.

  Snow Leopard iCal - event on Friday if the Nth is a weekend/holiday?

• Why are the menus that I wrote for my site moved to the right in Firefox?

  I use a combination of html, pages css and JavaScript to provide my visitors with drop-down menus.

  The menus are designed to appear directly under the top level 'Pseudo-boutons' when these buttons receive an "onmouseover" event

  While browsers IE, before and Chrome display these menus properly - IE the position of designed - Firefox them moving about 50% of their width to the right. There are no other problems.

  I would like to have my sites Web works correctly in all web browsers, including Firefox.

  Suggestions as to how can I modify my code to fix this problem are welcome.

  Update your browser Firefox 8 and check

  • getfirefox.com

• Is iCloud duplication pictures library after I moved it?

  Why iCloud download my entire library once I moved to its location?

  I just moved my library of Photos on an SD card that is I installed on my Mac after following these instructions--> How can I move my library of photos on an external drive?

  I agree with iCloud and my upload of photos was to the point of moving the library.

  When I open Photo iCloud is now downloading all 5500 images and movies and says I'm going to run out of space and need to update my subscription of 50 GB to 200 GB.  My current library is about 34 GB as my machine is tied up now of course download 34 GB of files.

  Any advice welcomed!  Thank you

  Why iCloud download my entire library once I moved to its location?

  Unfortunately, it's going to happen, when you move a library. You must enable iCloud photo library for the library again moved and iCloud will download all the photos in order to merge them into the library in iCloud.  There are many reasons for iCloud to download again the library and merge again with iCloud:

  • When you move the library to another drive.
  • When you restore the library from a backup.
  • When you switch the iCloud library temporarily to another library and return to your original library.
  • When you activate my photo stream for another library, for example an Aperture library and then come back.
  • When you repair your iCloud current library.

  All these events will cause pictures to download the new library on iCloud and compare it to the current library iCloud in iCloud.

  The last time that this happened to my current library with about 40000 photos, it took an entire week.  I had just temporarily turned on picture My stream for my Aperture library.

  When I open Photo iCloud is now downloading all 5500 images and movies and says I'm going to run out of space and need to update my subscription of 50 GB to 200 GB.  My current library is about 34 GB as my machine is tied up now of course download 34 GB of files.

  It will run iCloud storage, if the library is identical to your original iCloud photo library.  The download is to compare the files, and if it is discovered of duplicates, it will keep only one. But it's useless.

• How can I get records events outside of the single folder in Photos?

  I read a response indicating that the old iPhoto 'events' can be moved out of the single folder "in the sidebar. I don't recognize a sidebar on my screen of Photos. How can I get some or all of these events/albums out of this unique folder and on the screen, as well as the other albums? I just upgraded to El Capital and Photos. I really prefer to choose to bring out in the form of records, and to select individual images in the other events to create new albums if they are possible. I also want to get rid of albums smart premade if possible.

  To display the sidebar, choose display in the menu, then see the sidebar.

  You can select all albums under the events folder and drag them to the Albums. That will remove the record albums. Do the same for any other folder that you want to delete records from.

  You cannot delete the default Ablums Smart. You can delete only the albums or smart albums you create.