Spooler Subsystem App error
I am getting error app subsystem spooler at each logon, try to install the printer, Microsoft Fix it application etc...
No matter what I try, I get the error. I deleted the files in the registry, printers, drivers, re-boots etc. I tried pretty much every suggestion on the net or website microsofts with negative results. I am at a total loss. I had the printer installed and works very well, and I don't know what changed to stop work. Before I re - install OS and the painful process of restoring files, I would like to correct it properly. Any suggestions are greatly appreciated.
Thank you
Thanks for the help SpiritX,
I just thought of it. I had loaded the software for the printer on another computer on my network and causing problems on all the computers involved. Chans ideas worked, but it comes to be done on all computers on the network.
Once again, thank you.
Tags: Windows
Similar Questions
-
Spooler subsystem app error (spooler does not)
None of my printers make their appearance. says "spooler subsystem app error; must be closed.
None of my printers make their appearance. says "spooler subsystem app error; must be closed.
Hey
Joanne t
Follow the information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Walter, the time zone traveller
-
I have a Canon MG5220 printer. I can print from my wireless on my laptop that runs windows 7.
Hello
- What is the full error message?
- All changes made to the computer before the show?
Check out the link and follow the steps.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894Important registry This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
-
Spooler SubSystem App error in windows xp
I am running windows xp and have had a HP photosmart printer installed for over a year. From now on I get the error: Spooler SubSystem App has encountered an error. I can print the screen and print from IE8, but whenever I try to print from Adobe Pagemaker I get this error.
Adobe has a forum for all their products, including PageMaker:
http://forums.Adobe.com/community/pagemaker_general
I've never seen your problem, but if you search the forum Adobe PageMaker for:
Spooler Subsystem App
You will see that you are not alone and find some discussions that involve more than one printer HP and PageMaker and maybe some of these ideas will be a source of inspiration or help.
If you find nothing inspiring, I post there and see what they have to say.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Keep to spooler subsystem app error message.
I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occurHi lille lt.
1. What is the full error message that you receive?
2. don't you make changes on your computer before this problem?
3. when exactly you receive this error message?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
I tried to delete all software, including drivers and then reinstall but have had absolutely no success. I should mention that I use a Lexmark printer and supposedly there are hidden drivers files that cannot be deleted. Any help would be appreciated
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Check with Lexmark Support and drivers
Lexmark - Support
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_USLexmark - drivers
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=downloadI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Error in the Spooler subsystem App 0x000006ba
Found this same problem on answers back in 2010.
My OS is Windows Vista Ultimate 64.
Do not have this problem in the 2 years of the life of this PC.
Try printing and Spooler subsystem App error 0x000006ba. Error of Job Status window Interface also.
Worked on the resolution of this problem for more than 7 days.
The Lexmark printer is connected to the wireless router.
PC n ° 1 with this problem is connected to a Lexmark printer by USB and to the router by cable.
PC #2 is connected to the router via cable and can print on Lexmark without any problem.
PC #3 and #4 PC is wireless to the router and can print on Lexmark without any problem.
I have uninstalled and installed the software Lexmark times more than I can count. After the uninstallation ran I used search and remove related files from Lexmark.
All PC #1 and Lexmark drivers are up-to-date. Latest firmware in the Lexmark. I restored the factory default Lexmark printer.
All Windows updates have been checked twice a day and all the new updates installed.
I ran difficulty he printer Microsoft and test files. Test the printer shows no problems spooler. File test found problems once, then no more after that.
The Lexmark printer icon sometimes disappears from the printer configuration Page.
After the attempt to print and get the spooler error, the printer indicates a job pending. I can not cancel this job and it connects the printer so that other computers can not print with current work on PC #1. Sometimes I stop PC #1 pending work disappeared. Other times, he is not missing.
I searched the web looking for a solution and all Microsoft. Nothing works.
Heeelllllllpppppp!
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Check with Lexmark Support and drivers
Lexmark - Support
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_USLexmark - drivers
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=downloadI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Spooler subsystem app has encountered a problem.
HP Laserjet 1020 printer does not work. Have used this printer for years. Last print job has stopped the printing process and give the spooler subsystem app has encountered a problem error message.
Used Mr. Fixit. Have the print spooler service manually restarted and the RPC service. When I try to print, Spooler Subsystem App Error message appears and printer spooler stops,
OS is XP Home Edition Service Pack 3.
Cannot remove hardware HP Laserjet 1020 and reload HP Laserjet 1020 download did not fix problem.
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Use of the special procedure for printers Lexmark described below and follow in its first Article. If still no joy, use the alternative method that is linked below.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article.
A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.
Open a command prompt window (start > run > cmd > OK)
Type the following in the black command prompt window and press enter
dependent on the spooler of sc config = RPCSS
outputNote that there is no space before the =
If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.
Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
Use of SuperAntiSpyWare found two serious problems. Could cross printer of pending work. Printer works fine. Thanks for your reply and advice.
Best regards
-
Getting subsystem app error XP print spooler
does anyone have a solution to an error message will not be completed in the third step, then he returned throughout the day because it does not end. started the print spooler, stopped, it continues to smoke. been on many Web sites to get answers but are not all find. frustrating problem. be grateful if response could be found. Thank you...
Hi Lynn,
Check to see if this article helps you.
-
I got the error message "Spooler subsystem app stopped working and was closed".
I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file. I can not load a printer now. What is the next step?
Hello
You should probably check with Support from Adobe and their communities and Forums in case
There are known problems.Adobe - Support
http://www.Adobe.com/support/Adobe - communities
http://www.Adobe.com/communities/Adobe - Forums
http://forums.Adobe.com/index.jspa====================================
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
States of error Spooler SubSystem App does not work when I print
When I try to print anything it either tells me that the Spooler SubSystem App does not work. How can I fix it. I have reloaded my printer, but still does the same thing.
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
printer in network error spooler subsystem app stopped working
I try to print from a computer Win7 computer with shared Vista HP F4280.
Error on Vista "spooler subsystem app stopped working, computer or restart the service.Have executed 'FixIt' Center, reinstalled the drivers, check the updates etc.Nothing has worked so far, tried both wireless and wired connections.Printer works very well is directly connected to a machine.Remote scanner works well.The suggested "fix" did not work in this case.
Finally, I deleted everything and nothing to do with of the HP F4280. Started, re - install a stand-alone printer on each PC and tests.Then I shared the printer on the Vista PC, on the Win7 PC I used the shortcut of 'Network' to display the PC, double click on the VistaPC to view his actions, clicked on the printer and everything was done.Thank youMike -
Windows 0X000006ba error regarding spooler subsystem app. Printer has disappeared from my computer.
Am no longer able to choose a printer. Default printer (DellV305) disappeared! It is always loaded into my computer, but I am unable to what anyone due to the print spooler error.
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
-
Coil service does not print. Data Execution Prevention - to help protect your computer, windows has closed this program - Spooler Subsystem App - someone on the internet recommended to enter advanced system settings and by setting an exception on the spooler subsystem app - doesn't work always no - UN installed & reinstalled the driver printer Samsung ML-3050 a million times - get an error message - implement the program has encountered an error in the installation ML3050 - icons do not appear in the printers and Faxes folder. HELP, HELP, I'm GOING CRAZYemember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
More happy salvation,
1. were you able to use the printer before without any problem?
2. when the problem started?
3. you remember to make changes to the computer before this problem?
You can check out the following link and try the steps suggested by Robinson Zhang Microsoft, Moderator Monday, July 28, 2008 07:15 and check if it helps.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Error message: Spooler subsystem app has quit working
I have been using Windows Vista Home Basic version for several months. After turning on my computer for several minutes, two weeks ago I received an error message "Spooler subsystem app stopped working. Then when I clicked on the solution put on internet, I was recommended to close this error message. But then another message appeared "Data Execution Prevention has closed.
How can I solve this problem? I have not install new software at all. How is it that I get these 2 posts? Please notify.
My email is * address email is removed from the privacy *.
David Taylor
Hello
Your printer drivers have become probably either damaged or defective. Remove them and install a new download of the manufacturer of the printer. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Maybe you are looking for
-
I can log in account synchronization with this URL https://account.services.mozilla.com management and is listed. When I go to the tab sync in the Preferences window, only two options are listed: set up a new account and or to pair a device. Setting
-
I sent an email and 12 hours later, I get a message that it has been delayed, how will I know when he sends actually?
-
I need to configure Outlook Express to send PDF files from scanned documents.
original title: I need to CONFIGURE OUTLOOK EXPRESS ON MY EMAILTO SEND OF SCAN of PDF DOCUMENTS [IE8] KODAK TECHNOLOGY SAID I SHOULD CONTACT MICROSOFT. WHEN I TRY TO SEND SCANNED PDFS, IT IS SAID: A FEW ERRORS HAVE OCCURRED WHILE THE REQUESTED TASKS
-
E-mail of receiver 10 blackBerry when data is out
I am traveling to the United States and I turned off my network, my data and data roaming is also disabled. I always get my emails. Would it not because I am connected to Wifi? Or is there something else I need to cut in my settings? I appreciate
-
How to change the public network to a network of home in 64-bit windows 7
Windows 7 cannot access internet by WiFi card because the net work must be changed to a home network. How do I change, even the troubleshooting cannot make the change. How can I do it manually change it?