Spry Accordion with strange behavior in IE

Similar Questions

• Spry Accordion with nested accordions

  I'm building a list of FAQS with headings and under headings, use an accordion Spry container with several children, however only the additional depth of level. Nested accordions expand the more complete list. Instead, the height of the div is fixed, and I get a scroll bar. Any ideas what part of the javascript to tweak to open this feature?
  
  Here is the page:
  http://www.pixmission.NET/Dev/TeX/FAQs.htm
  
  Thank you

  Nevermind, I finally dug up a response. If someone else is looking for it - the latest version of Spry can perform:
  http://labs.Adobe.com/technologies/Spry/widgets/accordion/SpryAccordion.js

  From and to the top.

• Dreamweaver will not insert a Spry Accordion with css

  I'm working on an accordion Spry in Dreamweaver and get into trouble, so I have deleted all its css in the css Panel.  Now, when I say Insert > Spry Accordion, it is not all css.

  Uh-oh, I did?

  Make a new page.  Insert the Spry Accordion and save the page folder in the root of your site.

  DW should save active Spry to your folder of active Spry.  If not, see below for the default CSS file.

  @charset "UTF-8";

  / * SpryAccordion.css - version 0.5 - Pre - Release Spry 1.6.1 * /.

  / * Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */

  / * This is the selector for the main container of the accordion. For our style by default.

  * draw us left, right and bottom borders. The upper edge of the accordion

  * is made by the first AccordionPanelTab which never moves.

  *

  * If you want to limit the width of the Accordion widget, set a width

  * the accordion container. By default, our accordion expands horizontally to fill

  * a space available.

  *

  * The name of the class ("accordion") used in this switch is not necessary

  * make the widget function. You can use any class name you want to style the

  * Accordion container.

  */

  . Accordion {}

  border-left: 1px solid gray;

  border-right: 1px solid black;

  border-bottom: 1px solid gray;

  overflow: hidden;

  }

  / * This is the selector for the AccordionPanel container which houses the

  * tab panel and panel content area. It is not make it visually, but we

  * ensure that it has zero margin and padding.

  *

  * The name of the class ("AccordionPanel") used in this switch is not necessary

  * make the widget function. You can use any class name you want to style a

  the container of accordion panel.

  */

  . {AccordionPanel}

  margin: 0px;

  padding: 0px;

  }

  / * This is the selector for the AccordionPanelTab. This container houses

  the Panel personnel. It is also the container where the user clicks

  * to open a specific panel.

  *

  * The name of the class ("AccordionPanelTab") used in this switch is not necessary

  * make the widget function. You can use any class name you want to style a

  the container of Accordion Panel tab.

  *

  * NOTE:

  * This rule uses the - moz-user-select and - khtml-user-select properties to prevent the

  * the user to select the text in the AccordionPanelTab. Here is the browser owner

  properties that only work in Mozilla browsers (such as FireFox) and KHTML

  * browsers (such as Safari), so they will not pass the W3C validation. If you want your documents to

  * validate and don't care if the user can select text in an AccordionPanelTab.

  * You can remove these properties without affecting the functionality of the widget.

  */

  . {AccordionPanelTab}

  background-color: #CCCCCC;

  border-top: 1px solid black;

  border-bottom: 1px solid gray;

  margin: 0px;

  padding: 2px;

  cursor: pointer;

  -moz-user-select: none;

  -khtml-user-select: none;

  }

  / * This is the selector for the content area of a Panel. It is important to note that

  * You should never put any padding on the content area of the group if you plan to

  * use the animations of accordion panel. Place padding non-zero on the content

  * area can cause accordion suddenly increase in height, while signs alive.

  *

  * Anyone who styles an accordion * MUST * specify a height on the Accordion Panel

  * Content container.

  *

  * The name of the class ("AccordionPanelContent") used in this switch is not necessary

  * make the widget function. You can use any class name you want to style a

  the container of the accordion panel content.

  */

  . {AccordionPanelContent}

  overflow: auto;

  margin: 0px;

  padding: 0px;

  height: 200px;

  }

  / * This is an example of how to change the appearance of the tab of the Panel which is

  * currently open. The "AccordionPanelOpen" class is added and removed programmatically

  * to panels as long as the user clicks on the tabs in the accordion.

  */

  . AccordionPanelOpen. {AccordionPanelTab}

  background-color: #EEEEEE;

  }

  / * This is an example of how to change the appearance of the tab of the Panel as the

  * mouse passes over it. The "AccordionPanelTabHover" class is added programmatically

  * and removed containers tab panel as the mouse enters and leaves the tab container.

  */

  . {AccordionPanelTabHover}

  color: #555555;

  }

  . AccordionPanelOpen. {AccordionPanelTabHover}

  color: #555555;

  }

  / * This is an example of how to change the appearance of all the Panel tabs when the

  * Accordion has focus. The class "AccordionFocused" is programmatically added and removed

  * whenever the accordion wins or loses the keyboard focus.

  */

  . AccordionFocused. {AccordionPanelTab}

  background-color: #3399FF;

  }

  / * This is an example of how to change the appearance of the tab of the Panel which is

  * currently open when the accordion is in focus.

  */

  . AccordionFocused. AccordionPanelOpen. {AccordionPanelTab}

  background-color: #33CCFF;

  }

  / * Printing rules * /.

  @media print {}

  . Accordion {}

  overflow: visible! important;

  }

  . {AccordionPanelContent}

  display: block! important;

  overflow: visible! important;

  height: auto! important;

  }

  }

  Copy & paste into a new CSS file empty.  Save in the Spry Assets like SpryAccordion.css file

  Nancy O.

• Spry Accordion with iFrames

  I have a Spry Accordion which I use on the same page as an installer of the iFrame. I want the AccordionPanelTab a link to iFrame linking.

  In order to get the iFrame to work I need a link like this:

  <a href="iframepage.php" onclick="return changeIframeSrc('iframe', this.href);" target="iframe"> 

  This works for links within the AccordionPanelContent but is not if I connect the AccordionPanelTab.

  I can get the AccordionPanelTab to post a link to

  <a href="iframepage.php" onclick="window.location=this.href;return false;"> 

  but not in the iFrame. Is there a way to combine these two do their job or another way to make the AccordionPanelTab link?

  Thank you very much.

  Function added as in

  Changed the link as in

  Puts life

  Not sure if it's metlife.html or metlife.php, as the two are mentioned in your document. ' Ensure that there is no bar oblique after fake '

• How to combine the Spry Accordion with link pseudo classes?

  Hello

  I tried to get the text of the link I've included in the tabs Panel accordion to behave according to the behaviour of the accordion (in particular the hover state) but so far struggled to do. I hope I explained that well - does anyone know if it's possible to do? I can provide the code later if necessary.

  Essentially, when you hover over the text of the link it works as expected, but as soon as you place the cursor on it - while still having your mouse over the tab-text changes color (which is okay) but because you're still hovering above the current tab, only the background color is clashing with the color of the text. If you mouse then on the tab itself the background color changes and everything seems normal again. I am looking for a way to combine the features of both, namely to have the sequence of the text, but with the right css applied so that it looks correctly part of the accordion behavior.

  Help would be very appreciated.

  See you soon.

  If you change

  onclick = "MM_goToURL ('parent', ' audio / index.ht ml');" return document. MM_returnValue'> Audio

  TO

  Audio

  It works the way you want.

  Also have a look here http://backyardfurniture.com.au on the Help menu of the Accordion Panel.

  GRAMPS

• Default Spry Accordion Panel

  CONTEXT: I inserted a Spry Accordion with six different panels. Each Panel has its own set of links. Each link corresponds to a page in a long series of linked pages which together form a single document. Each panel of links represents a contiguous set of linked pages and a section of the document. In addition, I created a model for the entire document which includes the Spry Accordion just described.
  
  GOAL: create an editable region in the template that will allow me to control the default Panel for each page of the document.
  
  FAILURE of ATTEMPT: documentation Adobe to set the default for the Spry Accordion Panel suggests the following JavaScpript:
  
  < script type = "text/javascript" >
  var acc8 = new Spry.Widget.Accordion ("Accordion8", {defaultPanel: [someNumber]});
  < /script >
  
  where someNumber is an integer that is greater or equal to zero. When this code is entered into the model error.
  
  DISCUSSION: continued research in the JavaScript file that controls the accordion, I was able to find the function that controls the default Panel. It appears like this:
  
  Spry.Widget.Accordion = function (element, opts)
  {
  This.Element = this.getElement (element);
  this.defaultPanel = 0;
  this.hoverClass = "AccordionPanelTabHover";
  this.openClass = "AccordionPanelOpen";
  this.closedClass = "AccordionPanelClosed";
  this.focusedClass = "AccordionFocused;
  this.enableAnimation = true;
  this.enableKeyboardNavigation = true;
  this.currentPanel = null;
  This.Animator = null;
  this.hasFocus = null;
  This.Duration = 500;
  
  this.previousPanelKeyCode = Spry.Widget.Accordion.KEY_UP;
  this.nextPanelKeyCode = Spry.Widget.Accordion.KEY_DOWN;
  
  this.useFixedPanelHeights = true;
  this.fixedPanelHeight = 0;
  
  Spry.Widget.Accordion.setOptions (, opts, true);
  
  Unfortunately, some browsers like Safari, style sheets in our
  page depends may not have been loaded at the time, we are called.
  This means that we must postpone attaching our behavior until after the
  OnLoad event is triggered, because some of our behaviors are based on dimensions
  specified in the CSS.
  
  If (Spry.Widget.Accordion.onloadDidFire)
  this.attachBehaviors ();
  on the other
  Spry.Widget.Accordion.loadQueue.push (this);
  };
  
  QUESTION: How can I access this feature of in my template to change the setting for this.defaultPanel?

  Quote:
  The main JavaScript file for the accordion can be controlled by a
  model, since he lives in a separate .js file.

  I do not use templates myself, but it looks like the correct way to approach
  the problem is the one used on your 'ATTEMPT failed. You can try it
  again and report message the exact error you get and at what stage. Maybe
  you get help on that.

  EXPRESSION OF GRATITUDE
  Thank you for your encouragement. Indeed, part of the solution to my problem was discovered through a reconsideration of my attempt failed. The other part came from the information provided me while helping another person with a related, but different problem. It turns out that the line of code in my failed ATTEMPT is automatically placed in the model when the SPRY accordion is inserted. Unaware of his presence and the right place I am he entered by mistake a second time. This triggers not only an error message, but it renders unusable, various other parts of my document.

  THE SOLUTION
  First step: find the line of code that is similar to that given by the following text:
  
  In my model, this code was found at the bottom of the HTML body tag.

  Second step: understand that the name of the variable 'acc8' and the name of the "Accordion8" parameter provided in the sample code above are arbitrary, and that the two are automatically defined when then a SPRY accordion is inserted. Important is that these names are likely to be different from what you see in the sample code above, and that you need and probably should not edit them in your document.

  Step 3: change the number in the name pair: value indicated as defaultPanel:2 to a number between 0 and one less than the number of panels that you create in your accordion. It is this number that allows you to determine the Panel that appears when the document is opened.

  Step four: Save and test in your favorite browser. Enjoy!

  CAUTION:
  This experience taught me a crucial lesson on the use of Dreamweaver. Dreamweaver has a mind of its own and can easily ruin you in seeking to correct your own mistakes for you. The solution is to save your document with a second copy before attempting any innovation that is not already integrated in the Dreamweaver program.

  FURTHER EXAMINATION:
  As I created a template to use with other documents, I will now try to make this area of my template editable, so that I can change the default setting of every other page that I create from my template. As I still do this, understand that the steps above, even if it is valid for a document template, may or may not be valid for pages created from the template. I hope they are and it will keep experimenting.

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.

• Strange behavior with postGlobalEvent and eventOccurred()...

  Hello world

  I have a browser plugin for my application that will do two things:

  Firstly, when the BlackBerry browser is forwarded to a Web page with a particular MIME type, the browser plugin will say my application to go to the foreground. It works without any problem.

  Secondly, the browser plugin will display a global event at my request. My request, making use of eventOccurred(), will look for this event and the EC type-approval, it will execute an authorize() method that I have. This also works. However, I notice some strange behavior:

  The first time my application launches the BlackBerry browser and goes to the page specified (with a custom MIME type), everything works fine. If I had while my application to launch the browser and do it AGAIN, my authorize() method is running TWICE. If I open the browser of my application for the third time, so my authorize() method is started THREE times. See the model?

  .. .This is all this without leaving my application. If I had to leave and then start my application again, the 'sequence' prior would begin again. Thus, it seems that whenever x times that I repeat this process, the eventOccurred() method will receive x events.

  Here are a few snippets:

  public class Events {
      final public static int EVENT_AUTHORIZE = 1;
      final public static int EVENT_OTHER = 2;
  }
  

  manager.postGlobalEvent(pid, 0xCAFEBABE, 1, 0, null, null);
  

  public void eventOccurred(long guid, int event_type, int arg2, Object arg3,
              Object arg4) {
          if (guid == 0xCAFEBABE) {
              switch (event_type) {
              case Events.EVENT_AUTHORIZE:
                  authorize();
                  System.out.println("EVENT EXECUTION");
                  break;
              case Events.EVENT_OTHER:
                  break;
              }
          }
  
      }
  

  Can we see what is happening here? I've been "racking my brain" on this one for a while now...

  Thank you!

  "Thus, this can work any time the class is instantiated." The class is instantiated just before I open my browser".

  Application.getApplication().addGlobalEventListener(this);
  

  If you call the above (by instantiating your class) every time that you open the browser, applications to register this event listener again and again.

  If you're going to do it this way, make sure removeGlobalListener you when your application is done processing.

  "Can I make addGlobalListener when my application starts even if this class does not implement GlobalEventListener?"

  You can always have your UiApplication implement GlobalEventListener or just instantiate a new object that implements it in the constructor of your UiApplication.

• [MAF - AMPA] Strange behavior of the MAF with REST service

  Hi MAF Experts.

  I just noticed that there is a strange behavior in my application of the MAF. The first loading of the page, amx:page does not make its contents (of REST). However if I kill the app and relaunch the app, content appears.

  Pattern:

  1. Start of the CRG App
  2. Opening of session
  3. Dashboard (the content is rendered)
  4. Go to any other aspect (lets say a list of products)
  5. Open product list (content do not get returned)
  6. Kill the MAF application
  7. Start of the CRG App
  8. Dashboard (the content is rendered)
  9. Go to the product list
  10. List of products (content gets rendered)

  I put a few breakpoints on EntityCRUDService and RestPersistenceManager.

  So far it return the list of entities and display the correct data (from watches in debug mode)

  Last thing I noticed is the red color below. She defined the EntityList with the new value of REST (This displays a correct value).

  TaskExecutor.getInstance (.execute (isDoRemoteReadInBackground ())

  , () -> {

  Auto Sync all actions pending first, pass false for inBackground because

  We want to process actions pending before the reading distance

  getDataSynchManager (.synchronize (false));

  The list of entities < E > = executeRemoteFindAll();

  If (entities! = null)

  {

  When an error occurs (for example server is not available, the method returns the value zero)

  setEntityList (entities);

  }

  });

  Any suggestion?

  All the rest service are configured with AutoQuery = true in the persistence - mapping.xml

  See you soon,.

  Hendry

  Hendry,

  Thanks your testcase, I was able to understand the problem.

  It turns out that MAF 2.1 has problems dealing with the advanced way in which AMPA running background tasks with the help of a thread in all of features.

  We have slightly modified the implementation in AMPA to use one thread per function and now the update issue is resolved. I sent you a link to new construction.

  We will publish the new generation soon on GitHub so that others can benefit in the same solution.

  Steven Davelaar,

  Oracle Mobile A-team.

• Strange behavior with mkdir ASMCMD

  First there is option no. - p with the mkdir command, as in Linux. To create multiple directories/subdirectories so I tried the following.

  asmcmd > mkdir arch/racdb1 + arch/racdb2 + racdb1/arch/archivelog + arch/racdb2/archivelog

  1. This creates the first three folders. But gives error on the last.

  Someone said do not use + sign. So tried this,

  2. tried still nothing does not.

  

  Once again creates first 3 folder but not the fourth. On the other hand, if I just try to create 3 directories/subdirectories in any order it works. Of course I have it in two separate commands, but I wondered why this strange behavior.

  But it worked for me in 11.2.0.3:

  ASMCMD > mkdir + DATA / has DATA + DATA/C / A / B + DATA/C/D

  ASMCMD > cd DATA

  ASMCMD > ls

  A /

  C /.

  ORCL.

  ORCL_P /.

  PEPSI.

  SERVICETEST.

  TEST /.

  vmrac-cluster.

  ASMCMD > cd A

  ASMCMD > ls

  B /

  ASMCMD > cd...

  ASMCMD > cd C

  ASMCMD > ls

  D /.

• Strange behavior with V$ PDB and CDB_SEGMENTS views of Oracle 12 c

  Hello

  I am trying to run a query between the CDB_SEGMENTS and the views V$ PDB on the container ROOT, but I have a strange behavior:

  SQL*Plus: Release 12.1.0.1.0 Production on Fri Sep 6 12:33:25 2013
  
  Copyright (c) 1982, 2013, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
  
  SYS@orcl12c 06.09.2013> show con_id
  
  CON_ID
  ------------------------------
  1
  SYS@orcl12c 06.09.2013> show con_name
  
  CON_NAME
  ------------------------------
  CDB$ROOT
  SYS@orcl12c 06.09.2013> SELECT B.NAME
   2 , A.CON_ID
   3 , A.TABLESPACE_NAME
   4 FROM CDB_SEGMENTS A
   5 INNER JOIN V$PDBS B
   6 ON B.CON_ID=A.CON_ID;
  
  no rows selected
  
  SYS@orcl12c 06.09.2013 12:34:17> SELECT B.NAME
   2 , A.CON_ID
   3 , A.TABLESPACE_NAME
   4 FROM CDB_TABLESPACES A
   5 INNER JOIN V$PDBS B
   6 ON B.CON_ID=A.CON_ID;
  
  NAME CON_ID TABLESPACE_NAME
  ------------------------------ ---------- ------------------------------
  PDB$SEED 2 SYSTEM
  PDB$SEED 2 SYSAUX
  PDB$SEED 2 TEMP
  PDBORCL 3 SYSTEM
  PDBORCL 3 SYSAUX
  PDBORCL 3 TEMP
  PDBORCL 3 USERS
  PDBORCL 3 EXAMPLE
  ...
  
  23 rows selected.
  
  SYS@orcl12c 06.09.2013> SELECT *
   2 FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('asa03y45g99zb'));
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------------------------------------------------------------------
  
  SQL_ID asa03y45g99zb, child number 0
  -------------------------------------
  SELECT B.NAME , A.CON_ID , A.TABLESPACE_NAME FROM
  CDB_SEGMENTS A INNER JOIN V$PDBS B ON B.CON_ID=A.CON_ID
  
  Plan hash value: 3590150304
  
  -------------------------------------------------------------------------------------------------------------------------------------------
  | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
  -------------------------------------------------------------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | | | | 1 (100)| | | | | |
  | 1 | NESTED LOOPS | | 333 | 14985 | 0 (0)| | | | | |
  |* 2 | FIXED TABLE FULL | X$CON | 2 | 30 | 0 (0)| | | | | |
  | 3 | PX COORDINATOR | | | | | | | | | |
  | 4 | PX SEND QC (RANDOM) | :TQ10000 | 167 | 5010 | 0 (0)| | | Q1,00 | P->S | QC (RAND) |
  | 5 | PX PARTITION LIST AND | | 167 | 5010 | 0 (0)|KEY(AP)|KEY(AP)| Q1,00 | PCWC | |
  |* 6 | FIXED TABLE FIXED INDEX| X$CDBVW$e7cdf8a6 (ind:11) | 167 | 5010 | 0 (0)| | | Q1,00 | PCWP | |
  -------------------------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
   2 - filter(("CON_ID">1 AND "INST_ID"=USERENV('INSTANCE')))
   6 - filter("CON_ID"="CON_ID")
  
  
  25 rows selected.
  
  SYS@orcl12c 06.09.2013> select con_id,count(*) from cdb_segments group by con_id;
  
   CON_ID COUNT(*)
  ---------- ----------
   1 5795
   4 4397
   3 3923
   2 3401
  
  4 rows selected.
  

  Basically, I would like to display the container_name of segments within all PDB files, but the join between CDB_SEGMENTS and views of V$ PDB does not work (lines 20-25) pending the join between CDB_TABLESPACES and V$ PDB works very well (lines 29-34). I've posted the execution plan (lines 50-82).

  You have ideas about this behavior?

  Thank you in advance,

  Arnaud.

  Hello

  Not 100% sure that this is a bug or just something about the way containers works now - however this select seems to work OK:

  SELECT B.NAME, A.CON_ID, A.TABLESPACE_NAME

  OF CDB_SEGMENTS, V$ PDB B

  where to_char (B.CON_ID) = to_char (A.CON_ID)

  See if it works for you too?

  See you soon,.

  Harry

• Strange behavior with the PSD in Photoshop

  I am currently working with a two-page ID CS5.5 document. This is a CMYK document with CMYK images and grayscale.

  Strange behavior is the following: I have a gray levels (tiff) image that is repeated on the page 1 and page 2. This image looks completely different from page 1 to page 2. I have triple checked everything (opactiy, effects, etc.) and then I started to remove items from page 2 one by one.

  As I deleted a psd file all of a sudden all the images in grayscale on page 2 changed his appearance to match page 1. The PSD in question is also in CMYK with a transparent background. What the frack happens?

  I'm more concerned to know if it makes a difference when it goes to print, or if it's just weird screen in InDesign.

  Anyone who has heard of this or know why this happens - would like to hear from you.

  Thank you!

  I think it's simply because of full transparency on the page. Should not affect the production of gray images... but check in Acrobat.

  Mike

• Strange behavior with the paths of the image

  All, morning

  I have a strange behavior going on with my image paths and I was wondering if someone might be able to identify what they think happens?

  On the relative paths of my model (.. / Images/example.jpg) work very well.

  However, on the pages of the child the same relative paths do not display images and so I had to remove the '... /' to get to work (ending up with Images/example.jpg).

  This is obviously not desirable that I'm going to manually tweak the child pages where the content of the combo box was copied directly from the model that works very well.

  Any ideas what might be up?

  Thanks in advance

  You have not yet entered the main directive of models, which is that only changes to the unchangeable in the model regions will be applied to the child pages.  If this were not true, then we could never put unique content on a child page!

  So - the diagram is as follows:

  1 create a template and save it.

  2. the model of a page child spawn.  The child page will be a 'identical' model copy.

  3. Add a unique content to the page of the child.  The child page is now more a copy of 'identical' of the model.

  4 change something in the part NOT MODIFIABLE from the model and save it - all child pages receive the change.

  5 change something in the EDITABLE model part and save it - no child pages do not receive the change.

  6 spawn a NEW page of the model, and it's still a copy of 'identical' AGAIN CHANGED model.

  See how it works?

• strange behavior with script times

  Hi all

  I have strange behavior with one of my scripts, and I can't understand where is the problem.

  Before you post the code, here's the principle.

  My form has two fields of time: "Time of Injection" and "Post injection time.

  The script runs when the output of "injection time" event and look if the injection time is before time "post injection.

  Here is my code:

  //get the value of the field "Injection time"
  var injection = this.formattedValue;
  
  //create an new Date object
  var injectionTime = new Date();
  
  //split the string to get the HH MM and SS values of the formattedValue (HH:MM:SS)
  var injectionTimeHoursString = injection.substr(0,2);
  var injectionTimeMinutesString = injection.substr(3,2);
  var injectionTimeSecondsString = injection.substr(6,2);
  
  //parse the strings into integer
  var injectionTimeHoursInt = parseInt(injectionTimeHoursString);
  var injectionTimeMinutesInt = parseInt(injectionTimeMinutesString);
  var injectionTimeSecondsInt = parseInt(injectionTimeSecondsString);
  
  //set the integer values into my Date object
  injectionTime.setHours(injectionTimeHoursInt, injectionTimeMinutesInt, injectionTimeSecondsInt,0);
  
  
  //do the same for the other time field "Post injection time"
  var post = post_injection.post_time.formattedValue;
  var postTime = new Date();
  var postTimeHoursString = post.substr(0,2);
  var postTimeMinutesString = post.substr(3,2);
  var postTimeSecondsString = post.substr(6,2);
  var postTimeHoursInt = parseInt(postTimeHoursString);
  var postTimeMinutesInt = parseInt(postTimeMinutesString);
  var postTimeSecondsInt = parseInt(postTimeSecondsString);
  postTime.setHours(postTimeHoursInt, postTimeMinutesInt, postTimeSecondsInt,0);
  
  
  //calculate the difference between both
  var diff = postTime.getTime() - injectionTime.getTime();
  
  //if the difference gives a negative result, display a message, empty the fields and set focus
  if(diff<0) {
       xfa.host.messageBox("The time of injection should be sooner than the time of post-injection activity measure.\n\nPlease re-enter correct times.","Incompatibility of times");
       this.rawValue = "";
       post_injection.post_time.rawValue = "";
       xfa.host.setFocus(post_injection.post_time);
  }
  

  The code seems to run pretty well... except with certain values.

  If postTime is 12:00

  and injetion is 12:04

  I get the error message and everything, so it's OK

  BUT

  When postTime is 12:00

  and injectionTime is 12:08

  No message! as if the difference was not negative! (the difference is zero...)

  When I display the time in a messagebox, 12:04 12:04:00 GMT blah blah... gives but 12:08 gives 12:00:00 GMT etc...

  same problem with 12:09, but not 12:10 for example...

  Any thoughts?

  Thank you.

  Thank you, but since I'm used to javascript, I'll stick to it.

  I understand the problem. It's a javascript with the ParseInt method bug!

  Check here: http://www.breakingpar.com/bkp/home.nsf/0/87256B280015193F87256C85006A6604

  parseInt("08") = 0.

  How to lose 2 hours for a stupid bug...