SQL more unable to connect (computers connected via a DSL router)

Similar Questions

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.

• Satellite L350 - unable to connect via a WLAN

  Hello
  New to this lark of thread

  You just bought a L350
  I have managed to connect to the Internet via a cable, but am unable to connect via wifi.
  WiFi is turned on. He finds my BT Home Hub but when I connect, it just says: it's impossible.

  Help, please

  Have you checked the Wifi device in Device Manager? The driver is properly installed?

  Try turning off your firewall, which could block the Wifi connection.

  Also try to press Fn + F9 to toggle wireless devices

• VPN between two computers xp via a dsl connection

  Is it possible to remotely connect to two computers xp via a dsl connection? Using vpn

  Hello

  To establish a VPN connection must act as a VPN server.

  There are hardware devices (such as some routers) that can do the job.

  Or try this, http://www.aeonity.com/frost/howto-windows-xp-vpn-server-setup

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• Unable to connect via nfs, ftp only

  My network has two devices NAs - a NetGear ReadyNAS 102 (2x1To) and an OXFORD (NAs French device, 1x500GB). I'm trying to set up a weekly backup of critical files to the ReadyNAS to the GLOBAL system.

  On the OXFORD ring road, I activated CIFS, NFS and FTP. Using FTP, I am able to connect to the NAS without problems. However, I couldn't finish a single backup via FTP. The last attempt continued for 3 days and then failed. When I try to connect to the same part of the OXFORD box by using nfs, I get the error "unable to connect to the host.

  Are there steps I can perform to solve this problem?

  Thank you

  bsmerbeck wrote:

  I think that we could be closer to our cause of errors. I tried this command and received this error message:

  "showmount: failed to get address for.

  Maybe try this variant:

  showmount e 127.0.0.1

• HFG30 unable to connect via the Android app

  Nexus 7, HFG30 - all online and printed documentation confusing. Is not clearly the distinction between applications and the use of the web browser. Nowhere is the name of this app is mentioned. Had to go back with support to find the name.

  The name of the application's access to the camera more than, unfortunately, the Pixels.

  HFG30 not in the taken list supported here. Support says that it is supported. After all, no connection. Can connect via a browser however. Anyone else?

  Hi robbif!

  Thanks for posting.

  The application CameraAccess and CameraAccess Plus is not for all our camcorders.  Some newer models, like the G30 HF, are controlled using a web browser based remote connection, instead of using the application.  For more information about this, visit our help wireless page or view the distance travel brochure HERE.

  If it is a time sensitive matter, additional support options are available to contact us.

• Unable to connect via wireless with SSID broadcast disabled

  I want to configure my router for my SSID is not broadcast, because I think it's a logical step to take for increased security. I have not been able to do since I started using my new laptop Inspiron 5558. I tried this several times and every time I turn off the SSID broadcast, I am not able to connect to the Wi - Fi on this laptop. Other remote computers in my house and my smartphone connect without problem, but nothing I've tried helps my new computer Dell laptop to connect via Wi - Fi, except for allowing the SSID broadcast.

  I have a router Actiontec MI424WR reverend E. I have installed the new driver and the Intel PROset utility and unfortunately nothing has changed. I went to the settings to investigate some of the other solutions offers, and I came across something that seems to have solved my problem. What I found in SETTINGS/network & Internet/change adapter options/Wi-Fi/see the status of my properties of connection/Wireless / on the connection tab, it was an uncontrolled area with the words "connect even if the network is not broadcasting its name (SSID). I checked this box, and since then, I was able to connect to my network wireless with SSID broadcast disabled. I will now call this resolved and if no new problems arise. start a new post. Thanks for sticking with me on this.

  Ed J.

• Unable to connect via the Web client

  Dear team,

  Web customer service is installed on the SSO Server (SSO installed on seprate VM), since last year 1 it works very well, but as of today I m not able to connect through webclient get below error

  https://SSO.test.com:9443 / vsphere client / #.

  Unable to connect to the server vCenter Single Sign On https://SSO.test.COM:7444/ims/STSService? wsdl .

  Note: I am able to connect VC via vsphere client but not to Web client.

  concerning

  Mr. VMware

  After you restart the WebClient service, wait 5 minutes. Now, I m able to connect VC via the web client.

  Thanks for all the help and support.

• Unable to connect via radio - impossible to obtain network address

  All,

  I had to restore this laptop due to virus problems (my daughter system..).  I have put back it and it works except that I am unable to connect to the wireless network.  It says 'Acquiring Network Address' and goes then to the "Limited or no connectivity."

  Here are the details:

  System:

  Inspiron 1300 - XP Pro SP2

  Dell Wireless 1370 WLAN Mini-PCI Card

  Parameters:

  o use Windows to configure the verified wireless network

  o in Dell Wireless Utility, unchecked "let this tool manage your network."

  o WZC: start & automatic

  o TCP/IP: Obtain IP automatically and obtain DNS automatically

  I took action:

  o reloaded all drivers available for my service tag, including the pilot for

  the network card

  o went through all the Dell relevant troubleshooting steps

  o I have a different laptop that connects to the wireless network and I

  compared the parameters between the systems of work and non-working - they

  seem to be the same (another pc and card)

  o the 'bad' system can connect to the network via ethernet cable

  The status bar displays the network icon (pc screen) with yellow trinangle and!

  and 5 green bars for the network card has an excellent signal with unknown status.

  I'm not clear on the question of whether Windows or the utility of the card should be network management; I tried both to no avail.  I'm basically out of options to try and hoping someone can help me.

  Please let me know if there are any additional necessary information.

  Thank you in advance for your help!

  
  

• SQL * more syntax to connect to Apex 3.1 workspace

  How to connect to a particular application of workspace Apex using SQL * MORE?
  
  In the tenth Summit, Sql * more command is: "sqlplus username/password" to connect and connect to the base.
  
  However, at the Apex 3.1 "sqlplus username/password" is no longer the correct syntax to connect and connect to the database is created in the workspace Apex.
  
  I created a table called "Sample" in the workspace Apex. I can run the sql query on the "Sample" in the GUI Apex SQL Workshop table. Type "sample to describe" workspace for SQL workshop gives me the desired result.
  
  However, when I come out to the command prompt and use sqlplus to issue "sample", I get "table or view does not exist.
  
  Is there any documentation on how to use SQL * PLUS to connect to the tables created in the workspace Apex?
  
  TIA

  1. If no database not created in a workspace

  2. There are schemas attached to a workspace (or created by it)

  3. you must connect to sql more like this:

  C:\Users\Denes Kubicek>sqlplus
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Di Okt 14 22:19:28 2008
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Benutzernamen eingeben: dkubicek@xe
  Kennwort eingeben:
  
  Verbunden mit:
  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  SQL> desc emp;
   Name                                      Null?    Typ
   ----------------------------------------- -------- -----------------
  
   EMPNO                                     NOT NULL NUMBER(4)
   ENAME                                              VARCHAR2(10)
   JOB                                                VARCHAR2(9)
   MGR                                                NUMBER(4)
   HIREDATE                                           DATE
   SAL                                                NUMBER(7,2)
   COMM                                               NUMBER(7,2)
   DEPTNO                                             NUMBER(2)
  
  SQL>
  

  This has nothing to do with the apex.

  I would say, your workspace has several patterns that are entrusted to him. You were probably asking a particular schema and he gave you the correct results. In SQL more trying to describe a table that is not there.

  This should give you some results:

  SELECT object_name, object_type
    FROM all_objects
   WHERE owner = 'DKUBICEK';
  

  where you replace "DKUBICEK" with the name of schema, you log into SQL Plus.

  To see the schema that you use for SQL Workshop / SQL commands, see the dropdown in the top right corner - schema.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Unable to connect via wifi with iOS

  These days I was unable to connect to Skype when on any wifi. As soon as I turn off wifi and use my cell network signed in full. I have a 6 s iPhone running the latest iOS and versions of Skype. Anyone else having this problem? I tried to reinstall the software with no luck.

  Never mind... 3 attepnts later took an uninstall, force the restart of the iPhone and reinstall to get it working again.

• Unable to connect via the android app

  I am able to s n the community and through my browser to change account details but am unable to connect through my android app. Only, I have the app and do not have a computer to check anything. It has literally been working just this morning/yesterday night 3 am is the last time that I checked).
  ZTE Zmax, 4.4.2 android, model z970, version 5.5.0.11658. Gives error "unable to connect".

  I fixed the problem by uninstalling and reinstalling.