SRVCTL utility database configuration.

Similar Questions

• Database Configuration utility - huray? :-/

  Hello (again, sigh).
  
  I want to install PeopleSoft FCM 9.1 and Yes, having no experience with the installation of PeopleSoft I decided to use the database Configuration utility, using the article provided by Nicolas Gasparotto as a guide:
  http://Gasparotto.blogspot.com/2009/12/DB-Wizard-850-for-Oracle-on-Linux.html
  as well as the Oracle Documentation. In the guide above, I should be up to step 9.
  
  This is the log that I get after failing to create the database:

  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:39:29 2010
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to an idle instance.
  
  SQL> spool createdb.log
  SQL> 
  SQL> startup nomount pfile=$ORACLE_HOME/dbs/initFC91DB.ora
  ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
  ORA-48140: the specified ADR Base directory does not exist [/u01/app/oracle/product/11.2.0/dbhome_1/dbs/<ORACLE_BASE>]
  ORA-48187: specified directory does not exist
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 1
  SQL> 
  SQL> create database   FC91DB
    2        maxdatafiles  1021
    3        maxinstances  1
    4        maxlogfiles   8
    5        maxlogmembers 4
    6        CHARACTER SET UTF8
    7        NATIONAL CHARACTER SET UTF8
    8  DATAFILE '/oradata/FC91DB/system01.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
    9  EXTENT MANAGEMENT LOCAL
   10  SYSAUX DATAFILE '/oradata/FC91DB/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT     10240K MAXSIZE UNLIMITED
   11  DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/oradata/FC91DB/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT     640K MAXSIZE UNLIMITED
   12  UNDO TABLESPACE "PSUNDOTS" DATAFILE '/oradata/FC91DB/psundots01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT  5120K MAXSIZE UNLIMITED
   13  LOGFILE GROUP 1 ('/oradata/FC91DB/redo01.log') SIZE 100M,
   14            GROUP 2 ('/oradata/FC91DB/redo02.log') SIZE 100M,
   15            GROUP 3 ('/oradata/FC91DB/redo03.log') SIZE 100M;
  create database   FC91DB
  *
  ERROR at line 1:
  ORA-01034: ORACLE not available
  Process ID: 0
  Session ID: 0 Serial number: 0
  
  
  SQL> spool off
  SQL> exit
  Disconnected

  OK so Oracle is not available, but:

  [oracle@vm-psfin91-db InstData]$ sqlplus SYS/system@SEED as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:46:49 2010
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL>

  The SEED is just a small database I created earlier to test connectivity between my servers - just a little crutch for me to see at least some progress. But it shows that Oralce is available, is it not?
  This who can I check/recheck?
  
  Looks like I'm starting to be a regular here on the forums boast help :D
  
  Thank you in front of me,
  Honza.

  These scripts are coming within the installation of the Application (HCM in your case) under $PS_HOME/scripts/unix, it seems that you missed this step and installed only Peopletools.

  Nicolas.

• Several primary and physical databases Configuration ensures in Data Guard Broker

  Hello

  Is it possible to add two or several primary and physical databases configuration ensures in data guard broker?

  I have 1 primary databases and two databases physical standby that is

  (1) primary that is pri - (database primary)

  (2) secondary i, e, s (physical pending)

  (3) Secondary2 i.e. sec2 (physical pending)

  Practical AM sinister place, my scenario is my pri and dry machines are in seat, if the pri crashed it switch to s that works very well and my S2 is in another area office. Suppose that if my two siege machines pri and sec crashed, so I want to do my mahcine sec2 as primary.

  I have two separate computers to the broker a headquarters and a District Office

  Use failure of quick start on Data Guard Broker, broker headquarters machine I have configured pri and dry but in sector office broker not able congifured pri and S2 and the machine.

  can be done several primary database configuration with data bases on hold?

  Has anyone done this before, or has a perform a recovery after loss of place...

  need help or suggestion

  thanx

  No.... It is not possible. When you use the DG broker, the first thing you can do in the DGMGRL utility is to deliver CONFIGURATION to CREATE. You can see on the doc of this command that you define here the PRIMARY DATABASE.

  The command to add a DATABASE to the broker, adds a new database pending. You cannot add an another primary.

  The broker configuration is explicitly for a primary and all standby databases is supported. If you have an another primary, you create a separate DG broker configuration.

  See you soon,.
  Brian

• Cannot access C: / drive with Oracle 11 G Database configuration Assistant

  Original title: m unable to access anything of my c drive.

  I configured my 11g using oracle it Database configuration Assistant O.S. is not allow me to access c still my system drive, it does not get as administration for all the system option. Please help me

  Hi abh.

  I suggest to see if the problem resolves running Startup Repair:

  http://support.Microsoft.com/kb/934540

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I create a new database without table using database configuration

  How can I create a new database without table using database configuration

  You can search for your "DBA 2 days" version oracle documentation for your version.  You should also read the manual of the concepts.  Create your own schema is pretty basic, all you have to do is to create a user.  Don't use dba or system for your own objects.

• "Cannot find the dbcodes file": PeopleSoft database Configuration Wizard

  Hello

  I am setting up a new installation of PeopleSoft, based on a copy of the record of my client PS_HOME. I installed before PeopleSoft, but I used the latest versions and started from scratch. Now I use PS HRMS 8.9 and PT 8.48 on a Windows 2003 server. I followed the manual to install 8.48 PT (installation of third party tools, using configuration manager), except for the wizard to install PT, because the files are already there. I changed all config files I had to include suitable locations for PS_HOME, Oracle database drivers, etc.

  Now, I'm trying to use the database Configuration Wizard to automate the creation of the database using Oracle 10.1.0.5.0. After you have selected a non-unicode database, I click Next, select the character set, and then when I click Next again once I get the message "Cannot find the dbcodes file."

  I checked in the folder PS_HOME/setup and there are two dbcodes files: dbcodes.pt and dbcodes.hc. It is originally a kind of confusion, or the wizard missing the dbcodes file somewhere else? Or maybe that's another question altogether, I'm not sure.

  Thanks for the help.

  To start with PS_APP_HOME introduced in PeopleTools 8.52.

  On the road to Peoplesoft: Peopletools 8.52: the PS_APP_HOME variable

  As you run on PeopleTools 8.48, the application is installed in the PS_HOME.

  ptengs. DB is used to create a single database of PeopleTools, you try to create a database of HCM. This file will not be used when creating your database.

  If you want to create your copy of HCM all files from 'PS_APP_HOME' to PS_HOME database and start Data Mover with option to create database.

  Should do the trick.

• OATS Database Configuration tool not found

  Hey guys,.
  
  I wanted to just start the 'OATS Database Configuration tool', but I can't find it in "start > all programs > Oracle Application Testing Suite.
  I did a full install of OATS Version 9.31.0036.
  
  Someone at - it an idea?
  
  Best regards
  Dewi

  I'll try to check first if the dbConfiguration jar file exists on the server, and second, to get the absolute path to the pot in the command line.

  C:\Programme\Oracle\OracleApplicationTestingSuite\jdk\jre\bin\javaw.exe-Djava.library.path=C:\Programme\Oracle\OracleApplicationTestingSuite\oats\lib - cp C:\Programme\Oracle\OracleApplicationTestingSuite\wls\wlserver\server\lib\weblogic.jar; C:\Programme\Oracle\OracleApplicationTestingSuite\wls\wlserver\common\lib\pdev.jar;wlfullclient.jar-jar C:\Programme\Oracle\OracleApplicationTestingSuite\\lib\DBConfiguration.jar

  JB

• Database configuration failed on CentOs 6.1

  After the successful installation of Oracle 11 g XE on CentOs 6.1, I tried to configure using 'configure /etc/init.d/oracle-xe. I configured the ports, password. From Oracle Net Listener passed, but the configuration of the database... step failed. Here are the config/log logs:
  
  [cloneDBCreation.log | http://pastebin.com/HUuWYxxs]
  [CloneRmanRestore.log | http://pastebin.com/6MxnvPXP]
  [postDBCreation.log | http://pastebin.com/YdicyG5r]
  [postScripts.log | http://pastebin.com/THfgEdbh]
  
  I don't really know of these scripts where could be the problem. Thanks for the replies.

  my name is sanjunbLin and sanjuronbLin ping output "ping: host unknown sanjuronbLin.
  and what I have in/etc/hosts:
  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  If something wrong with that? What should I do? THX.

  Yes, your host name is not available, not even locally.
  You it could add to the list of 127.0.0.1 assign your return address of local loop, but this would restrict access to your machine only. If you want to access your database from another computer, you must have a static IP address for your machine. This can be affected by a static DHCP rule or by giving your network card a fixed IP address. In both cases, we must add that the IP to your/etc/hosts and give it the name of your machine, so it can be resolved.
  By example, if your machine has an internal IP 192.168.1.123, your/etc/hosts should look like the following:

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
  ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
  192.168.1.123 sanjunbLin
  

  After you add this kind of entry, you should be able to restart your database configuration and to go further. If no other requirements are not present, it will end successfully.

  -Udo

• Missing database configuration file

  Hello
  
  When I am trying to build an application using Maxl Script, I get the following message
  
  Lack the database configuration file [< Path > \Db.cfg], ask disabled logging.
  
  Implied by this message and how to fix this?

  It's normal if you do not query record set in place. You can ignore the message (unless you try to configure the logging of queries!).

• After you have installed 11g on Linux, Oracle Database Configuration Asst failed

  Hi all
  After installation of 11g on Linux, everything is is fine except Oracle Database Configuration Wizard could not start. Do I need to uninstall everything? What should I do if I want to configure the database correctly. And also sqlplus path is not recognized, it's something to do with the failure?
  
  Best regards
  Valerie

  DBCA creates a database itself, try to manually run > dbca

• Can standby database configured on VMWare Server or not?

  Hi all
  
  
  Is it possible that our main server is not on the vmware server, but standby server can be configured on the server of VMWare?
  
  As far as I know, configuration of both server should be same.
  
  If our main server is not on the Vmware server but waiting for database configured on Vmware server, going to work or not.
  
  Pls suggest me...
  
  And another thing is that is it necessary to have a dedicated connection b/w primary and standby server for RFS process.
  
  pls suggest me...

  Hi again!

  That's right for your main server, but if you need to pass / failover to the standby DB on VM-Ware could you have performance problems.

  concerning

  Florian W.

• error on "Hive of Oracle Database Configuration - hive patterns"

  Hello
  
  I got the error "errors with ORA-31425 subs activation: subscription does not exist de-31425 ' at the stage of"hive of Oracle Database Configuration - hive patterns.
  
  the log file says this:
  
  ----------------------
  order of sql 2008-11-06_22-52-37 info took 5 seconds
  2008-11-06_22-52-37 nom_fichier_journal dblog.2008 - 11-06_22-52-37 db info
  2008-11-06_22-52-37 info oracle home C:\oracle\product\1.4.1.0.0\beehive_2
  2008-11-06_22-52-37 info connection BEE_code / * @(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=paty.xxxx) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = bee)))
  
  2008-11-06_22-52-37 info will execute SQL command @C:\oracle\product\1.4.1.0.0\beehive_2\beehive\db\search\src\sqlcode\plsql\ss_cdc_sub_activate.sql
  
  
  2008-11-06_22-52-37 info SET BDB=C:\oracle\product\1.4.1.0.0\beehive_2\beehive\db\
  2008-11-06_22-52-37 out of SQL process info:
  Connected.
  Errors with ORA-31425 subs activation: subscription does not exist de-31425
  
  PL/SQL procedure successfully completed.
  
  order of sql 2008-11-06_22-52-37 info took 0 seconds
  2008-11-06_22-52-37 error schema installation failed
  Tool "Oracle Beehive Database Configuration - hive patterns" returned status Failed.
  =============================================================
  
  
  I use as a server of oracle 11g database.
  
  No other warning or error are visible.
  
  I try to install it on Linux and Windows, and the error is the same.
  
  any advice?
  
  Thank you

  Hello

  Until 11.1.0.7 becomes available, Yes, these patches are needed. If you do not have access to metalink those will be difficult to put the hand off: (o)

  David

• Security import utility cannot configure groups

  I use v11.1.1.3 planning
  
  When I use the security for the import utility supply group, I get the following message if poster for each dimension member, I'm trying to provision (where "UAT_Testers" is a group in HSS configured in the Planner for the planning application, that I'm loading):
  
  "The following access not imported:-UAT_Testers, A & C Sub-Accounts,READ,@IDESCENDANTS because of name user not valid are in the file."
  
  However, when I change the name of the group to an individual user, which is in the group, the utility matter successfully and the dimension member is configured correctly.
  
  Does anyone have any ideas as to why the utility does not work with existing groups?
  
  Thank you
  
  Stephen

  I was going to write down the steps, but I think I'm going to be lazy and copy and paste the information.

  When you try to import access permissions to Hyperion Planning using the ImportSecurity utility, the operation fails with the following error in the importsecurity.log:

  Wed Nov 17 12:08:20 GMT 2010: the following access not imported:-end users, entity no, NONE, MEMBER, SL_GROUP due to invalid user name found in the file

  Cause: The "End users" group has been put into service for the Shared Services planning application, but the Group and its members are not yet present in the database of planning, because it has only been in service and none of the users in the Group recorded in the application yet.

  Solution

  * 1. Shared services confirm that users and groups are put into service for the purpose of planning with appropriate non-executive roles. Administrators can be assigned to access using ImportSecurity permissions (because they always have access to everything) and attempt to import of security for an administrative user will fail.*

  * 2. Connect to the planning administrator. Navigate to Administration > manage database, select the option "Security filters" and click on "Refresh". *

  In addition to the creation of the Essbase security filters, updating will synchronize users between Shared Services, planning and Essbase. All users will be also automatically assigned the role of "Server Access" Essbase in Shared Services (user level) if they have not already.

  After you have synchronized the users, run the ImportSecurity utility new

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Device unidentified USRP 2921 (not listed is not in the utility of Configuration of NOR-USRP)

  I connected with my PC (ethernet end) NI USRP 2921. I'm trying to use it with Labview 2015 64 Bit/2013 32 Bit. I also installed the driver NI USRP 15.0
  My USRP powered on correctly. It is also detected by my PC, but it does not identify its USRP and rest unidentified network.

  It does not appear in the NI USRP configuration utility.
  I also put a static IP address for my computer.
  Kindly help.

  Hi lmdadinho,

  Since your 2921 USRP powered and is detected, this looks like a problem of network as a problem with the 2921 more of himself. The Getting Started Guide (http://www.ni.com/pdf/manuals/376358a.pdf) has some network troubleshooting to try, beginning on page 12. This could be a good starting point.

  Best,

• T440p utility ThinkPad Configuration Capture/playback settings are missing

  Go to this URL:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS037579

  This is the driver for T 440p

  and chose the BIOS strings the

  Quote:

  Utility to Capture/read configuration of installation for Windows (SRSETUPWIN) for Windows 8.1 ThinkPad (32 bit, 64 bit), Windows 8 (32 bit, 64 bit), Windows 7 (32 bit, 64 bit), XP - ThinkPad

  Download driver is not included.

  the

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/n10ts02w.zip

  are missing.

  Please fix.

  This should be fixed now.