SSD drive to complete due to video rendering?

Similar Questions

• Could not complete the command of video rendering due to a problem with Adobe Media Encoder.

  Hello, I use a macbook pro retina and before I was able to make the video without problem, and now it is popping up.  I tried to remove and reinstall photoshop, but it was not useful. I would appreciate help or advice.  Thank you!

  Here is the error message I get:

  Could not complete the command of video rendering due to a problem with Adobe Media Encoder.

  Maybe try to download from this line:

  https://creative.Adobe.com/products/Media-Encoder

  If this does not work, you might want to try reinstalling the Psalm

• My 10.2 final cut does not recognize my Lexar 512 ssd drive which is formatted for Mac Os journaled and completely empty

  My FCPX 10.2 does not recognize my Lexar 512 ssd drive,
  who is formatted for Mac Os journaled and completely empty (already formatted),
  He comes to see my ssd as an SD card once I click an import media.

  I had once FCPX 10.0.8 and with which I was able to edit with my external Lexar 512 GB SSD drive,
  that was seen as a normal external hard drive with all my projects and events.

  I'm not using Time Machine, never used.

  Any thoughts, why can't you do more?

  Here is a screen from my drive information: http://i.imgur.com/3TrITKf.png.
  and here is a screen in FCPX where he sees my ssd as external device: http://i.imgur.com/PB4dgkB.png

  Thank you
  Federico

  SO it is not working properly. The drive is empty. Make a new library and save it on the SSD drive.

• Why this video rendering takes a long time?

  OS X Mavericks, Photoshop cc 2014, 2011 core i7 3.4 imac with 32 GB of ram, 256GB ssd drive work, 2 GB video card.

  See images for the configuration of the layers, etc. and export settings. Each 'shift' is a jpeg of a MB placed as a smart object. Each lower third is about 2 MB, placed as a smart object.

  Rendering takes about 24 hours to complete. Why is it so much to take? I tried this on other machines, but they're all around the same time. Is there a better way to do it? Thank you, in advance, for your help!

  

  

  How long we video clips and I see at least one you have added a camera raw smart filter.   I don't know how a smart filter works on a video clip. However if Photoshop need tenant one full frame for each video frame and filter each image frame with ACR then encodes images in a video stream to mp4, it could be a very time consuming process for nearly 170 000 frames.  Have you tried encoding mp4 without using the smart filter ACR adjustment? Also, you do not show the range of the timeline.

• Installation internal SSD drive and storage of documents on external hard drive

  Hello!

  I have an older iMac and I want to speed it up by installing a SSD drive.  Currently, my internal hard drive has 2 TB of storage, and I don't want to pay for one SSD of this size.  I consider the use of an external drive for my files and using the SSD internal applications and the operating system.  Can this work?  What is the internal SSD of minimum size I should get, more or less, according to my number of apps?   The documents will open at a decent speed?   It is up to me to use an external hard drive with a Firewire instead of USB connection?  Thank you!

  Hi Dan:

  Apps it really depends how much you use and what types of data you want to keep in vs SSD HARD drive.

  120-128 GB SSD: USD price: 60-70 price range.

  for 250/256 GB SSD: about USD: price range of 80-90

  for 500/512 GB SSD: about USD: price range of 130-150

  An external 2 TB drive: for laptop (USB bus-powered - usually 2.5 "HDD included): 90 us $, for the largest 3.5" Office style HDD: 90 USD

  For me:

  I store all my music on the external network drive (RAID 1 configuration, 2 TB, and 50 percent full this time), all my documents/pictures are still in my 500 GB SSD.

  I don't have much video projects on my SSD.

  

  I used about 200 GB in my internal SSD flash drive

  Good luck finding your best solution.

  Sam

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• HP ENVY desktop computer - 750-339c: desktop HP ENVY - 750-339c adding ssd drive

  Can we add a ssd drive to this computer

  The answer would be 'YES '.  The procedure, parts, video and are explained here.

  I have a link only as an example.  If your cloning the original HD, you must follow the steps by the cloning software. Be aware of the differences in the original size of the HD, I would keep side (to protect your OS system) after the installation of your SSD. If you want a secondary data drive, pick-up a new HD.

• Display driver cannot complete installation on Qosmio G30-137

  I just bought qosmio g30-137 of the Germany. My laptop had a German version of windows and I installed winXP PRO Greek edition. I have a problem with the graphics card driver. I downloaded from the TOSHIBA site. While I do Setup search the driver files that does not exist and I can't complete installation. I would like to know if anyone knows where I can find a driver to complete the procedure or if anyone knows what the problem is and how I resolve?
  Also starting from TOSHIBA site some installation instructions that explain how to do the installation with the appropriate sequence. Also, I would like to know where I can find the chipset driver?

  Hello

  Have you installed the Windows from the original CD of Microsoft?
  Why you suggest that the graphics driver has a malfunction?

  I guess you can not complete the original installation of the Win operating system due to the RAID driver and graphics driver. This unit has been delivered with RAID function and you need to install the RAID driver at the beginning of the installation of the OS.

  In addition there is also an instruction and installation utility chipset on the Toshiba driver page.

• Addition of SSD drive

  I have a Pavilion a6010n.  It has two hard disks, but I would add a SSD drive.  Can I do this?  The system has also two CD/DVD drives.

  Hello

  Please first check the spare SATA ports (bottom right: blue, yellow,...). If

  

  b it has alternative port,

  (b) there is the guest room,

  You can add SSD to your machine. SSD being much smaller and thinner, you need a set of media and to connect SATA cable. Please see the following guide:

  http://download.Intel.com/support/SSDC/hpssd/SB/intel_ssd_installation_guide_g17251.PDF

  and the following video:

  https://www.YouTube.com/watch?v=8JOxKSkkdMM

  Kind regards.

• Conversion of SSD drive for the reader to boot on m7 with Win8

  I just bought a new m7-j020dx (product code E4S19UA #ABA) with Windows 8 from Best Buy.  Unfortunately, it came with a standard hard disc (HDD), and I would like to install a Solid State Drive (SSD).  I have an Intel 320 and 530 series-reader.  But I was not able to get a bootable from that disc.

  The first thing I tried was cloning the drive to plant on a new disk of 530 series using AOMEI Backupper.  I got an error writing on the partition of the third.  I thought that maybe the drive was bad, so I tried again with an Intel 320 series SSD drive.  Same mistake.

  The next attempt was to clone the disk to another disk of 1 TB (connected via USB), reduce the main partition with MiniTool and clone of the 320 series SSD.  The cloning went well.  However, with the new installed SSD, the computer will not start, and I get "Error0x0000225", something about a file not found.  Disable "secure starting" in the BIOS setup has not helped (I did after the clone).

  So I thought I would do a clean install of win 8.  I generated a recovery on a 32 GB USB SanDisk player disc using Win8 recovery disk generator (as indicated on the site of HP).  I then ran the program of recovery out of the USB drive and after a few hours of software installation driver and several reboots, I get a message from HP, indicating that the installation was not complete.  Reinstall did not help.

  I don't know what the problem is.

  What the recovery disk USB one made from the original bad HARD drive (we get only a single shot at it)?  Do I need media of the order of HP on disks?  Are there problems with the use of SSDS on those computers?  Should I not a BIOS settig correctly (UEFI)?  Is there some Intel storage drivers clutter it?

  I think my next step will be to create a disc Image and place it on the SSD drive.  But I doubt that this solves the problem with the start to it.

  Another option might be to build fresh using Win8 media, then download and install each driver from the HP website.

  Any ideas out there in the land of the experts?

  Vachsen wrote:
  

  Thank you, erico, for advice.

  I tried this with 320 (160 GB) series and SSD 530 series (120 GB and 240 GB).  Actually, I have not tried on the 240GB again, just two other. . The 240 GB SSD is the best candidate. During cloning, using a larger SSD is the best for worms down the road when other programs are installed.

  So far, I've done everything suggested this that caramel:

  -Updated the BIOS for later: F.43. 03/01/2014 (HP support site).

  -Installed Intel Rapid Storage Technology v. 12.9.0.1001 (taken from the Intel site).

  -Updated the firmware of the 530 series 120 GB using Intel SSD Toolbox v2.0.10 of 06/20/2013 (from Intel).

  -The series 160 GB 320 firmware was up to date.

  -Installed the Data Migration Software Intel v. 2.0, dated 29/04/2013 (taken from the Intel site).

  -Updated environmental Support UEFI v5.3.3.0 dated 26/09/2013 (on the HP support site)

  -Enabled secure boot.

  Even using Data Migration tool Intel did not work.  Before Support UEFI environment, data migration tool would go to the step to reset but does not start what whether manually or to another.  Support UEFI environment, the software says simply "Operation failed." Following the manual data migration softwarecan be a bit tricky. There are a few things about the bootind of the Acronis loader * which must be carefully designed for the operation to succeed.  Intel also has a forum which can help as well.

  
  

  When I hit F10 and in the Configuration of the system, the Intel RST is not available.  So I suspect there is something not right here. The suggestion of updating the BIOS of caramel didn't across before it was made. It was not necessary and therefore not a good plan. I suggest that you use the Diagnostics UEFI and rollback to the previous BIOS. If you need advice with those just let me know. I have a few images that should show you what you should see. 

  A number of things, I noticed I did upgrades:

  -The site of HP support for my computer has Intel Rapid Storage Technology 12.0.7.1002 v, dated 30/06/2013 is earlier than on the Intel site.  Maybe I should roll back. That must be rolled back to the version shipped by HP. I see you introduced makes as stated in a previous post.

  -The HP support site has two distinct "RST", storage technology products a quick and a quick start technology.

  Intel has "RST" next to their rapid storage technology, so I might be confused.  I have installed the driver of the technology of quick start on the HP support site so if it is not already on the computer, perhaps it is not running and is the "RST" which is the missing piece.  In fact, same caramel said I need fast boot technology driver and then linked to download Rapid Storage Technology driver. Do not pay attention to what it says caramel.

  Here are two of the same?  Support site of HP with two drivers and version numbers, I suspect not.   Any ideas would be useful.  They are indeed different.

  The Intel Rapid Storage Technology softpaq sp61600.exe driver provides NCQ (native command qeueing) features for the SATA controller.

  The Intel Rapid storage Technology driver softpaq sp61325.exe is supposed to improve the SSD or mSATA consumption of hibernation and also imrove the resume from hibernation.

  You can't even consider installing either softpaq to clone the drive. It is always better to keep things simple.

  The SATA cable USB you use has two connectors usb at one end?  It is necessary to provide enough power for the SSD for data migration is not. Connect each usb connector to a different usb port.

  Dan

  Intel also recommends the free use of third parties such as cloning utilities

  http://www.EASEUS.com/disk-copy/

  http://Clonezilla.org/downloads.php

  http://www.partitionwizard.com/products.html

  EASEUS is, in my opinion, the best of the three.

• Replace merge with ssd drive, cannot be done?

  My hard drive of my iMac 27 ", end 2012, is running out. It has a fusion of 1 TB drive.

  I asked the service guy how much it would cost to replace the 1 TB with a 512 GB SSD drive.

  He said that one cannot do. He claims that the only thing that can be installed is a 'disk original Apple', given that she is a fusion player, he has several sensors that a regular disk or an ssd, does not.

  Is this true? I thought drive merger was only a software technology "pair" a small disc with an older hard drive ssd.

  Of course, it is possible, but understand that the HARD drive in the computer has a special sensor used for the detection of the temperature and the fan control. In addition, what you ask is probably not an Apple authorized the change. A Fusion drive uses the features of Mac OS X CoreStorage to create the Fusion drive and manage. However, in itself a Fusion drive does not require any special equipment unless one you have used flash PCI-e instead of a real SSD memory.

  If your computer is no longer under warranty and complete loss of any future Apple support doesn't bother you, then you can make the change yourself.

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• HP Pavilion 15-p211ne: upgrade to ssd drive

  Hello

  I recently bought a new HP Pavilion 15-p211ne and I want to replace the optical drive with ssd drive, I have the following questions:
  1 should I put the SSD as a secondary drive and reinstall windows, or it must be primary?
  2. What is the right size: 9.5 mm Universal SATA 2nd disc HARD SSD Hard Drive Caddy for CD / DVD-ROM optical Bay or 12.7 mm
  3. is there an official Universal SATA drive 2nd HARD SSD Caddy drive for CD / DVD-ROM optical Bay of HP, and is it safe to install no hp caddy on my new laptop computer.

  Kind regards

  Here is the Service Manual:

  Manual

  It is a 9.5 mm optical drive. See page 63 for removal instructions. You can use any optical drive SATA 9.5 mm hard drive adapter tray. HP is no 'official' part, so you must use a version of alternative, and they are widely available. Try jacobsparts.com.

  However, the SATA interface for the optical drive is slower and will not support booting from the hard disk into the adapter. So I advise you not to put a SSD in one of these adapters because it will not run at full speed.

  The optimal configuration is an SSD as main boot drive and a mechanical drive in pure storage adapter.

  Unfortunately, access to the hard drive inside the laptop is a little difficult and potentially void the warranty if you mess up anything in the process. The manual contains instructions to access the hard disk (p. 88), and these videos show the removal of the top cover (on a closely related model) which is the hardest part:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c04324972&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0008

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• M6-1035dx Pavilion: clone SSD drive cannot locate the recovery Partition

  I recently bought a HD 500 GB of SSD to replace the original that came with the laptop.  The SSD drive I bought is slightly smaller than the original one.   I used the cloning software is Macrium.  Partitions, I am interested in cloning are the HPTools and recovery.  Stand have been cloned successfully by the software.  I put the active recovery as well.

  After swapping the drives, the system starts the HPTools immediately, but the options for the restoration part are "grayed out".  I can't access it.  I tried several times, and this is where I am stuck.  It seems that the recovery partition is not detected by the cloned HPTools.

  I do not have the recovery DVD, but I have the original HD with partitions intact and they work just fine because I recently test the recovery process.

  I missed well to clone the original HD somehow that the SSD is unable to detect the partition?  Maybe I missed a step?  The difference in the size of the hard drive causes a problem in the recovery process?  How can I remedy the situation and use my new SSD?

  Thank you for all your advice.

  Try the complete sector-by-sector disk cloning.  If you use Macrium, you will need a paid version. The free version just do enough for the advanced cloning procedure you need.  See the following web document to compare versions.

  http://www.Macrium.com/reflectfree.aspx

  BTW, an SSD detects nothing. This is the BIOS and the operating system that detects hardware, firmware and software.

  You can use HP recovery media successfully on an SSD or not, that has at least 160 GB of capacity. Your 500 GB SSD certainly has enough capacity.