SSH banner available

Similar Questions

• Deployment to connect on a router that is already running an ssh IPSec tunnel

  I have a bunch of routers that have been made (by someone else!) with Internet IPsec tunnels to the base, but with a telnet vty access network. It must be updated so that only ssh is available for use vty.

  Its pretty easy to deploy ssh, but part of the task is to generate an encryption key, "generate the rsa encryption key" etc, if I try to do the configuration without this command, I get an error message asking me to do.

  And there is the problem: when I generate a key, it screws the existing IPsec tunnel somehow. Worse still, is not do so immediately, he's waiting for an indefinite period, probably (I guess) until after the tunnel IPsec has been idle for a period and has stopped/started, while I * think * is happening is that on the re-opening of the tunnel, he picks up the wrong key, and the other end kills the link. Newspapers have nothing relevant in them, and I always try to have the failure occur on a router running the debugging.

  Has anyone tried to do this before update? should we put ssh first, and then rebuild the config of IPsec tunnel?

  Thanks for your ideas/comments

  Jim

  If the IPSec VPN using certificate authentication, RSA keys regeneration may be bad. Without knowing your IPSec configuration, I would say that the best approach would be to generate an SSH key that will not interfere with it. Try something like this:

   crypto key generate rsa modulus 2048 label RSA_Key_SSH ip ssh rsa keypair-name RSA_Key_SSH

  This will generate a new key, which is independent of any existing keys and configure SSH to use.

• First Cisco 3.0 crashed after installing pi_technology_package - 3.0.2 - 1.0.56

  Hello

  Our first Cisco 3.0 after installing pi_technology_package - 3.0.2 - 1.0.56 crashed. SSH is available but not Web.

  Here is the story:

  1-. OVA installed

  2-. Installed the following hotfixes:

  Feature-Pack-3 - PI3.0 - 25.ubf

  4-Pack-device - PI3.0 - 15.ubf

  pi302 - 16.ubf

  pi303 - 10.ubf

  Server rebooted and everything seems to work fine.

  3-. Installed pi_technology_package - 3.0.2 - 1.0.56, rebooted and web server doesn't work anymore.

  We tried to restore a previous backup, perform a reset of db ncs and restart the ESXi machine, but without success.

  genpro01 / ncs status admin #.
  Health Monitor runs with an error. (Primary [role] [State] not configured HA)
  initHealthMonitor(): cannot start DB
  Database server is stopped
  FTP server is running
  TFTP Server is running
  MATLAB Server is running
  MATLAB Server Instance 1 is running
  MATLAB Server Instance 2 is running
  NMS server is stopped.
  Gateway of CNS with port 11011 is down
  CNS with port 11012 SSL gateway is down
  Gateway of CNS with 11013 port is down
  CNS with port 11014 SSL gateway is down
  Plug-and-Play bridge with port 61617 broker is down
  Plug n Play bridge config, image and resources are declining over https
  Plug-and-Play gateway is stopped.
  SAM Daemon is stopped.
  DA Daemon is stopped.
  genpro01 / admin #.

  Any suggestions?

  Kind regards

  David

  David,

  Unfortunately things can get really watered (technical term) with the database if the application (ncs) server is not restarted after each pack of patch installation or device. Later versions of patch began by pointing out that right from the start.

  I would say that you have two options-

  1 rebuild from scratch and just re - import devices. It is a self-service option.

  2 open a TAC case and see if they can recover the current state. The reports I got colleagues and read elsewhere here is the recovery of a failed installation of this tech pack was difficult at best.

  Sorry to be the bearer of bad news.

• virtual keyboard in Kaspersky anti banner, Advisor of the url is not available as a plugin in firefox 12

  virtual keyboard in Kaspersky anti banner, Advisor of the url is not available as plugin in Mozilla Firefox 11, 12.

  The patch I have is ready, but I don't know why it's not out yet, you can check the status here

  • http://Forum.Kaspersky.com/index.php?showtopic=233126

  wait a while... She will soon release...

• ReadyNAS 104 freezes GUI, reboot (ssh) said: no space is available on the device

  I have a problem with my 104

  After one or two days the admin interface stops working and it stops performing backup jobs.

  If I can ssh into the box and do a reboot it told: "error: no space is available on the device.

  But he there ara severel GB of free space on both og / and / data

  I run the latest firmware.

  What could be wrong?

  / Jacob

  I did an OS reinstall that solved the problem

• virtual keyboard in Kaspersky anti banner, Advisor of the url is not available as a plugin in firefox 5, how do I solve this problem?

  In Firefox version 4, utility kaspersky for anti banner, url Advisor and virtual can works well. But not for version 5. How do I solve this problem

  You are welcome.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• Command not available via SSH?

  Hi all:

  is there a difference when I SSH into ESX host using a regular user account (since ESX does not root to be SSH'ed in default without changing the configuration file)

  I needed to restart the service so I typed

  restart vmware-mgmt services

  for example

  the SSH session (I did a root able to run the command as root) recongize used this command but in the ESX Server console, it is allowed

  am I suppose to have some changes in access within the SSH or what needs to be done

  Thank you

  J

  These newspapers are specific to the ESX Server and is in the SC, hostd.log will probably be the most helpful when you try to add the host and might get an idea about what is the question.

  You can do the following before try again you:

  tail -f /var/log/vmware/hostd.log
  

  This will allow you to communicate with the host and vCenter, if there is in fact... a few keystrokes back before trying again then paste that here. You can do the same for the other newspapers by settling perhaps the last 30 40lines if there is nothing of obvious on what maybe causing the problem. There are moments where it takes a restart of the vCenter service, which could be a last resort, I had to go this way sometimes.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• In Hotmail, I get a stupid pop up banner "plug-in additional are required. How can I make disappear without loading the plug-in (which is not available automatically, in any case)?

  There is really no more details.

  URL of affected sites

  http://

  Your known list of plugins obsolete tampon() watch with security and stability risk.

  # Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
  

  Update the Java plugin to the latest version.
  See http://java.sun.com/javase/downloads/index.jsp#jdk (you must have JRE)
  ---
  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Also, make sure that your firewall is not blocking content or modify the HTTP response headers.

• MUSE can cause a build your own t-shirt or a banner on the site with cliparts and fonts available?

  I have a client who needs a site that will require a build your own Tee Shirts and banners on the site. Is it possible within the MUSE?

  No, this is not possible with Muse. Which should be a personalized coded.

• Can't ssh on Mac OS VPN server

  I can connect to my VPN L2TP server with my iPhone running iOS 10 through my network of data carriers and passed to my home network from Comcast, but everything does not work;

  What works:

  Access default Web site running the macOS Server using its IP address

  Public Web surfing

  I can ping my phone of any system IP address on my network

  What does not (what I tried):

  SSH to any system macOS on my network

  Access screen sharing on any system macOS on my network

  Resolve the local hostname to an IP address

  More information

  my iphone is running iOS 10

  My computers are running macOS Sierra

  I use Mac OS as host VPN server

  I use the client VPN L2TP iOS 10.

  Firewalls in the system is disabled.

  Typical VPN connections, you use the DNS server of your iPhone and not the DNS server of the network corresponding to your server.  In addition, Hello services are only available on the LAN.  So you have no way to resolve names to IP adrdesses for the network, you are VPNing.

  The only easy solution from an iPhone is to make a list of IP addresses and use them to connect instead of host names.  using IPs will work as long as your ISP does not also use the same internal (like 192.168 or 10.0) IP address than the network that you connect to.

• Mac OS Server - local users on console does not.  The shared access or ssh on account works

  A Mac Mini running Mac OS Server has problems with authenticating the passwords of local users.  Users connect the console of the physical computer running macOS app Sierra and Server 5.2.

  I'm looking for a short solution from scratch user and migrating data to a new installation.

  My hunch is that there is an interaction with the server application.  The other Macs, I managed on the same network fail server and do not have these problems.

  I installed a new version of macOS Sierra and then migrate the old data server on using the migration wizard, but the problem persists.

  The server used to have users on the network, but they are all deleted, and all users are the.

  In application server, the only services running time machine, the caching server and file server.  DNS, DHCP and Open Directory services are disabled in the server application.

  A local user password will work normally when the computer is restarted.  But if the user disconnects, and tries to connect to or use the fast user switching back and forth between accounts, the password is not accepted.  On reboot, it will be accepted.

  In addition to passwords are not accepted, other errors when you try to connect to specific customers include:

  "Your account is not a valid directory.  For more information, contact your system administrator'

  or

  "On behalf of user that you selected is not available."  Check your network connection and try again to the user account.  If you are connected to the network, ask system administrator for assistance. »

  If a network is used to access the data of the user using the user name and password, it works.  Similarly, SSH'ing via the terminal using the username and password works.

  An admin user can change the password back and it usually works for one login.  Then the password is denied if the user disconnects or use the fast user switching.

  Thanks in advance for any help on this embarrassing problem!

  I should clarify: it's the passwords of local users on the Mac who stop working (for the connection or fast user switching), until the Mac restarts.

• Looking for a SSH Client for Firefox OS

  I am looking for a SSH Client for Firefox OS (1,3).

  A FireSSH add-on is available for a 'normal' version of the firefox browser, but unfortunately it can not be installed in the mobile version.

  Greetings

  Michael

  Hi Michael,

  It's great! Thank you for your contribution to maintenance to the Mozilla (SUMO) forums and to push these code changes for Anyterm works well with Firefox OS.

  I want Firefox OS users who are looking for a SSH client for this solution in the future.

  Thank you

  -Ralph

• Can I insert in my banner advertising app?

  Can I insert in my banner advertising app? As on the Android OS?

  Hello Fil_und_moshpiT, is this question on an application that you want to present on the market of firefox? If so, please see https://developer.mozilla.org/en-US/Marketplace/Submission/Marketplace_review_criteria and the other resources available on developer.mozilla.org. Thank you!

• Network accounts are not available

  Hello

  I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.

  I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.

  It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user

  Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?

  Kind regards

  Peter

  Any help here...

  http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/

  During his execution, rc.boot and the other rc source of scripts /etc/rc.common , a shellscript that contains utility functions, such as CheckForNetwork() (check if the network is in place), GetPID() , purgedir() (Directory deletes the content only, not the structure), etc.

  • rc.bootfigures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (the sysctl variable kern.netboot has the value 1 in this case), it works /etc/rc.netboot with a start argument.

  /etc/rc.netbootmanages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls /usr/bin/nbst to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.

  • rc.bootnumbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck. rc.bootmanages fsck and return status.
  • If rc.boot has finished successfully./etc/rc

  http://Hayne.NET/MacDev/notes/boot_sequence.html

• cRIO-9024 - supports SSH (Secure Shell) network?

  The Shell Server enable secure (sshd) in the measurement software & automation for the cRIO-9024 OR is not available. Usually, this would be an option as shown here:

  http://www.NI.com/white-paper/14626/en/

  The cRIO-9024 OR does support SSH? Do I need to install anything extra on the target? I installed most of the software on the web on the cRIO.

  Thank you

  Mitch

  N ° only targets Linux (in the current line cRIO, i.e. the x 906 and 903 x) support ssh.