stable driver for Sharp AL - 1217D for Vista (and later Win7?)

Similar Questions

• Tecra S10-106 - 3 G driver for Vista Ultimate 64-bit

  Hello

  I own a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64 bit is much faster than Vista Business 32-bit, I would use Vista ultimate 64-bit operating system, but I can't find the 3G for Vista 64-bit driver. All the drivers can be downloaded from the USA in English and can be used in German, only the 3G driver is missing. Can someone send me a download link or tell me where I can find a driver for Vista-bit 66?

  Thanks in advance.

  Hello

  You can download the drivers here:

  http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20090303131409.zip

  64-bit drivers are located under the Portégé R600 laptop.

  Concerning

  Phil

• Re: Satellite P300D-12F PSPD4E: Driver for Vista 64-bit required

  Hey,.

  Hope you can help me...
  Satellite P300D-12F (PSPD4E - 018001GR) is a portable computer that has a 64-bit processor...
  So why I can't find the drivers on the page of the driver for Vista 64 bit?

  Hello

  > Why I can't find drivers on the page of the driver for Vista 64 bit?
  Maybe the 64 bit Vista drivers are not available at this moment, because this series is new to the market and the driver 64 bit Vista will be released in the near future.

  I think that it s just a matter of time when the pilots will be published on the European driver Toshiba page.

  Not out of patience ;)

  Good bye

• Qosmio G10-105: standard VGA need driver for Vista

  Hello

  I want software for standard VGA graphics adapt nVIDIA GeForce Go 6600 for Vista

  Please help me

  I put t know what you mean by software for standard VGA graphic card, but I guess you a looking for a driver for Vista graphics card.

  Unfortunately, Vista is not supported on the Qosmio G10 and F10 series and therefore a graphics driver doesn t exist on the driver page.

• Satellite A200-1BP: need to display driver for Vista

  Hi guys!

  I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...

  So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail

  Thanks for your answers rigth now...

  Hello

  Additional numbers describes the series of laptop! There are different A200 series!
  At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.

  Please choose the right Satellite A200 series and download the graphics driver on the right!

  But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.

  In such cases, it s advisable to run and play games on Win XP operating system!

• Konica Minolta PagePro 1350W Driver for Vista 32 bit

  Anyone know where I can get the Konica Minolta PagePro 1350W Driver for Vista 32 bit Please?  I downloaded a driver for Konica, but it does not work.  I am trying to install my printer on Vista for the first time, and the link to Konica does not help!  Thnx

  LC OK

  I found the problem.  My coil was not managed properly; This is the reason why the file wouldn't install.  So I decided, Konica, it is the right file. The PDF file is misleading.

  I'm all set.  Thank you for your patience with me and your help!

  Aspen

• Bizhub 160 driver for vista 64-bit required

  I can't find anywere bizhub 160 driver for vista 64-bit. I found the driver for vista 32-bit, but not for 64-bit. is there a solution for this.

  Hello

  It is not possible to use specific drivers for a different version of the OS, because they will not get installed properly.

  You can contact the manufacturer with the help of this link:
  http://kmbs.konicaminolta.us/content/FAQs/contactkmbs.html

• How can I make a boot drive for vista 32 bit?

  I am wanting to do a boot drive for vista Home premium 32-bit. How can I do?

  Ron,

  http://search.yahoo.com/yhs/search;_ylt=A0oGdNojqgROMhoAYzql87UF;_ylc=X1MDUCM5NTgxMDQ2OQRfcgMyBGFvAzEEZnIDYWx0YXZpc3RhBGZyMgNzYnRuBG5fZ3BzAzEEcXVlcnkDaG93IGNhbiBpIG1ha2UgYSBib290IGRpc2sgZm9yIHdpbmRvd3MgdmlzdGEEc2FvAzE-?p=how+can+i+make+a+boot+disk+for+windows+vista&fr=altavista&fr2=sfp&iscqry=

  06/24 / 1108:18: 50 am

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.

  I need the sidewinder force feedback wheel 64-bit driver for Vista THAT have.

  Thank you

  Try Google.

• DRIVER FOR VISTA OR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS.

  DRIVER FOR VISTA FOR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS. MORE SPECIFICALLY: 1) I CAN'T SCAN; 2.) I CAN'T REDUCE THE SIZE OF THE PAGE WHEN I PRINT. (3.) I CAN NOT SEND FAX.

  I INSTALLED THE RECOMMENDED DRIVE, BUT IT DOES NOT WORK. MY GUESS IS THAT I NEED TO UPGRADE VISTA TO A SUPERIOR VERSION OR A DOWNGRADE TO XP (WHICH THIS PRINTER WAS WORKING WELL ON).

  http://www.google.com.au/search?hl=en&source=HP&q=Dell+Support&Meta=&aq=f&aqi=G10&AQL=&OQ=&gs_rfai=

  Dell drivers and downloads.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Contact Dell printer drivers re OK.

  See you soon.

  Mick Murphy - Microsoft partner

• Hmmm there at - it an Audio driver for VISTA GX620

  Hi, is there an audio driver for VISTA 32 GX620 Optilex?

  
  

• HP scanjet 3400C - no driver for Vista

  HP have - in general! -do not highlighted a driver for Vista for my scanner - I guess that it is in the logic of the "If you have more than 3 years, you should change" - However, this scanner worked fine until I got my new PC and Vista.  Can anyone help with this?
  I think Microsoft have a moral obligation to produce the pilots of these machines, because it's their OS that messed up things in the first place, but the fact remains that I have to use my scanner and I need help setting up.  I tried to run the software as an administrator and enabled the option "Run in xp mode" but that no longer works.

  Help, please!

  You answered your own question.

  HP has not written the Vista compatible drivers for your scanner model.

  And it is the responsibility of HP to write the drivers, because it is their product, not a Microsoft Product...

  I agree with you; they are a disposable society.

  Unfortunately, there is nothing we can do about it.

  New models supposed to have more features and better.

  See you soon. Mick Murphy - Microsoft partner

• Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

  Drivers Vista MSN

  Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

  Hello

  Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

  One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

  If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

  Here's how to uninstall specific updates;

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

  See you soon.

  p.s. Always get the latest updates of the driver from the hardware manufacturer.

  Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

  http://www.brother-USA.com/downloads/default.aspx

• HP 240 G4-328TX: need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Hello

  Need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Can anyone provide me please the link for download it for windows 10

  Thank you

  Hello:

  See if this driver works...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609938 & swItemId = ob_153701_1 & swEnvOid = 4192