Standby

Similar Questions

• What / Standby button?

  On the Iphone 6, what / Standby button? What is this for?

  This page of the iPhone user Guide explains the functions associated with this button.

  http://help.Apple.com/iPhone/10/#/iphd290bfdd9

• Leave standby with fingerprint

  ON my iPhone and iPad, I used to leave standby simply by putting my finger on the home button (do not press).

  After the update, it's is not possible! I always press the button at the tea house and then continue with the contact ID. It is not so elegant and simple like betore.

  Settings > general > accessibility > Home button > to open finger rest

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• When I close the lid on my MBP, it goes to "Standby" to "Hibernate" why?

  My MacBook Pro for six years had been working perfectly until about a month earlier, when he stopped to stay in Mode standby when I closed the lid.

  With the lid closed, initially, he goes to sleep, but after about 30 seconds, it goes into hibernation mode and to turn on again, I have to press the power button. I then get a grey screen and no use of the trackpad. Shortly after, the gray screen disappears and the machine works perfectly.

  The battery life is very good (68%), I have reset the SMC and I have not loaded the new software. The only thing I can think is that this started to occur at the time of the last update of Safari.

  Does anyone else have this problem?  Comments or suggestions are appreciated.  Thank you.

  Hello, Spring Lake Bob!

  Thank you for using communities Support from Apple. After reviewing your post, I understand that your MacBook Pro sleeps as expected when you close the lid. Instead, it goes into a hibernation mode that requires you to press the power button to interact with him again. I certainly understand wanting to make sure that the computer sleeps when it should wake up how it should. I'd be happy to help you!

  Get help with your situation, I would say using the article below the link to help isolate and solve the problem of sleep.

  If your Mac does not sleep or wake up when expected

  See you soon!

• A problem of user login, in the Standby Mode

  I'm the only user on my Mac. When I go to Preferences system, users and groups, my name is listed and guest said off. My question is when I turn on the computer, I automatically connect. But, when I put the computer in mode 'sleep', get out of standby the computer asks for my password. How can I disable this password option as it should automatically log on.

  The software on my mac is the Version OS X El Capitan 10.11.5 (15F34)

  Hello rskern!

  I certainly understand wanting to save time logging in to your MacBook Pro.  We can certainly check a few preferences to see if we can get it put in place how you would like.

  To begin with, what you currently see is actually quite expected.  When log you in and then the screen locks automatically (go to sleep), it may require your password as if you were switching user accounts.

  You can always be asked to manually connect after a disconnection, switching back to another user accountor your lock screen.

  Is this article: set your Mac to connect automatically on startup - Apple Support

  But we can change the time it needs of your password after going to sleep in the Security & Privacy System Preferences.  Open system preferences > Security & privacy > general.  Once you're there, you can adjust how long until it takes the password after she goes to sleep or the screen saver starts again. The basics of the Mac: display a screen saver when you are not using your Mac - Apple Support

  Thank you for using communities of Apple Support and have a good!

• my iphone won't go into standby mode

  I recently bought an iphone SE.  Recently, I noticed that my phone will not mode when connected to usb or power standby. The screen just goes dimmed, but does not go to sleep mode

  Is this normal?

  THX

  "Sleep" mode should make the display turns off. Is - this just dim halfway? If so, it is not normal.

• Auto standby and sleep

  My system wakes up hours even after being put on standby, and then back to mode 'sleep' in itself.

  This happens when I wake up to go to the bathroom in the middle of the night. When I get to a certain place in the hallway, I hear the 'click' in my computer room that occurs subsequently to the top. Then I change course to control the computer and I find it wakes up. He will then go back to sleep in a few minutes. Either it's haunted to wake up when I do (it seems to wake up when I get to a specific place in the hallway (*?), or he wakes up frequently while I'm asleep.)

  Any way to prevent it to wake up or get a log of his self-directed behavior?

  Try disabling "Wake for network access" and "Enable Power Nap" in system preferences > energy saver.

• Re: Satellite L750-1LU - what is the standby time battery 'common '.

  Greetings.

  I'm Rom of the Greece...
  I am a new owner of Toshiba (a few days ago) and my question is the BATTERY LIFE.
  I have a Sattelite L750-1LU and I wonna know what is the 'common' stand-by time for this laptop battery...

  When I bought the laptop (with all these countless TOSHIBA utility pre-assembled), my laptop did not stay... more... 1 HR!

  I already have a Greek contact with the technical team of Toshiba, but since they told me... the battery throughout the night the first 3 - 5 times (was... Lithium-ion battery didn't need such thing!), I wonna contacted a person non - Greek Tech.

  I already spend a few days and found a lot of interesting tips to increase the battery life, I did it, I removed the pre-installed Windows 7 with all Toshiba Utilities and I installed one pure "fresh" Win7 WITHOUT ANYTHING else (except all the drivers, I took half day... to collect) and now I think that the battery life is quite better (about 3 hours and some)...

  But I wonna know exactly what is the 'common' battery standby time, for this model, I bought.

  Please, answer me back.
  Kind regards.

  Hello

  The laptop is supported by a battery of 6 cells 4400mAh
  It is a common battery that is built in series of laptops different, and it should be possible to extend the battery up to 3,5-4 hours work.

  But be aware that the battery working time depends on notebook use.

  Various factors may change the time of working of dough: brightness of the display, for example, use of CD/DVD and HARD disk drive, the CPU and cooling performance module all of these parts would drain the battery more slowly or faster depending on the settings.

  Working with the applications Office could slower battery as a game or watch movies on DVD.

  The formula is: t = Q / I
  t = time
  Q = electric charge (Ah)
  I have = amperage (A)

  So if you want to use Notepad for example 4 hours then all laptop computer s devices should not use more than 1000mA - 1100mA in an hour.

• Re: Satellite Pro M30: cannot enter hibernation mode or standby

  I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
  Now I can not access the 'characteristics of hibernation or standby.
  In addition, shortcut keys are inop.

  When I go to programs, utilities Toshiba the only option available is SD memory card format.
  I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.

  Can anyone help me with any of them?

  Hello

  For me, it looks like you don't have Toshiba drivers all installed and necessary.
  Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?

  Please note that the common Module are very important!
  You must install this software first!
  The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!

  On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
  Follow m this and I sure will get you everything works again!

• 32W1333DB does not turn on - standby blinks red and green

  IV recently bought nine toshiba Led backlight LCD 32w1333db.
  can someone help tv doesn't turn on no tv or distance, standby flashes red and green...

  Thank you

  Unplug the power to the TV and wait a bit.
  Then reconnect and press the power button on the remote to power ON the TV.

  It work?

• Toshiba 32LV933G does not start - only in standby mode

  I'm looking for a dump of memory (SPI Winbond 25Q64FVSIG U7).
  TV all the time on standby and will not start.

  Try to disconnect all the cables and remove it from the socket.
  Wait a while, and then connect it again in power.
  In case this is not enough, you need to contact a technician to check the hardware of televisions. I hope that the warranty is still valid

• No sound after the takeover by Satellite C50 - from standby or sleep

  I had downgraded the C50 Toshiba Windows 8 for Windows 7 64-bit and downloaded all the drivers linked from Toshiba's web site, but there is no sound on the phone, after that I have to put the computer on standby or into hibernation. The sound on the right corner icon is present and active.

  I already uninstalled the audio driver in the Device Manager and rebooted the computer.
  This work of t n.
  Also I tried to install a new version of the audio driver Toshiba s website again, once again, no noise.

  If I do a full stop down or restart the laptop the sound is back to normal. Sometimes it is not as well...

  I didn't start-> Run-> enter services.msc. Check the status of the Windows Audio service is started.
  but once again, NO HELP.

  All windows updates are up to date. 7(64bit) is: Windows Ultimate SP1

  I have all the virus scan of the computer, he found nothing.

  I rang Toshiba customer support, they ask for 45 pounds (GBP) to pay for technical assistance.
  It is the stupid things that technical support is payable even though this computer is only 3 weeks.

  Can someone help me then?

  Hello

  What audio device is set as default in Control Panel-> sound-> tab reading after that the system wakes up from mode sleep?

  Check if the speakers are set by default.

  But to be honest, I think that the reading already tab settings are set correctly.

  In my opinion, you must reinstall the entire system once maybe that something was wrong during the first installation, who knows that everything is possible.

  After the new Win 7 installation ensure that the ITD and Toshiba Audio Enhancement Utility and DTS Studio sound driver are installed correctly.

• Satellite P - How to disable hibernation and standby?

  I put the configuration of power to say never Hibernate and standby - both occur.
  What I am doing wrong?

  I'd be happy with sleep but don't want to Hibernate!

  Hi g p allison,

  You set these parameters of current power profile?

  For example, if you disable the standby and Hibernate to profile high power Performance, but you use or switch to balanced labour settings don t.

  In order to verify if they are disabled in all profiles of power!

• Satellite P205D freeze after hibernation/standby in Win7

  Hello

  Satellite P205D my daughter has just been upgraded to Windows 7. fine, except that now, it freezes shortly after the resumption from standby or hibernation. Minidumps just point to a "hardware". We executed the installed Toshiba installation software (it was a 'clean' installation), value added package, and updated the BIOS and 1.7.
  Any ideas what could be casuing the problem? -J' I assumed it was a suspended driver, but would have thought that they would have to day now.

  The only thing showing a problem in device manager is a (probably from a USB stick) USB mass storage controller, but that the deactivation has no effect.
  Thank you

  To be honest on this virtual path, it is not possible to provide the exact diagnosis. We don t know what you did exactly, which drivers, tools and utilities installed and install the who do you follow.

  Can you maybe provide more description on the OS version, driver installation, installation of additional software or anything else that can help a better understanding?
  Some external device is connected to your laptop, run some additional software?
  What it looks like in Device Manager? Everything has been installed correctly?

• SP A60 won't standby more

  Hello. I know I have it tacked on the end of another thread, but I thought DLI make my own post;

  I got my A60 SP since last September and its good always worked, but now it doent goes into sleep mode more properly - or rather it enters mode standby before going out of it after about 5/10 seconds.

  Its driving me a bit crazy - ideas?

  Hello

  Please check your Toshiba Power Saver settings or management of food and their default settings.

  After that, you should try to update current saver current site of Toshiba in the driver download section.
  https://EU.computers.Toshiba-Europe.com

  Rudi Bye