START EVERYTHING work in real-time is stuck

Similar Questions

• Not able to work in real time.

  
  RTA,

  I'm working on a PC, Windows 7, operating system 13, version 348.07 of the K2000 Quadro video card, 32 GB and 64-bit memory. My videos will not work in real time on this new computer. It installed fine and I can see all my videos and graphics in the timeline panel, but when I play the video it does not play, I created. It remains on the first image. My video card is causing the problem?

  Thank you

  Sissy

  Sissy

  Good to know of your success with 13 items first. If you do not already, update 13 to 13.1, by using a project open Help Menu/updates to date. First review

  First Elements ATR troubleshooting: EP 13: updated versions of Adobe Premiere elements 13.1

  Sorry for the delay in message exchanges. I think that your son is lost in the traffic of thread.

  I reread your thread earlier, and I wonder if the success with 13 were related to wake up a computer using a card video/graphics NVIDIA's first Elements 10. The specific issue of first Elements 10/NVIDIA GeForce is well known. But I wonder if there is a similar first Elements 10/NVIDIA Quadro specific question as well? Then the answer would have been to the

  a. roll back the version of the driver

  b. go to a later version of Premiere Elements

  c. change the graphics card on the computer

  Anyway, the good news is that you move forward with your Premiere Elements project. Always big news.

  And, please let us know the results and stay with troubleshooting. Great job.

  Best wishes

  RTA

• How can work in real-time my vi?

  Hello

  I have a vi that use a lot of loop in loop (as 128 * 128) in there.
  and to use an equation (contains: n! & gamma (n)) on this subject.

  It works fine but the problem is: when I click on the thumb, it takes about 1 second to respond to be broadcast.
  but I want to run in real time. and want to meet be ready less than 50 ms.

  What is the problem? and what do I do?

  Thank you

  
  

• Questions about the work in real-time

  Hello.  Just a few questions on usage in real time, in fact on the swf file.

  First of all, I want to create something of a drag and drop interface.  Is it possible to have a stage act as two separate steps?  I mean, is it possible to have the left side of my step hold all the components, they are moved to the right side of the scene and placed anywhere, the user can then click on save, and only the right side of the scene is saved?

  Secondly, I'm testing a few things.  What I would do to get a type of free transform on an image on the stage in real time, in the swf file?  So once the movie is played, the user can resize any image then how they like by dragging a corner of the image...

  Cheers for any advice.

  You can use 2 container (Sprite or MovieClip) objects one on left on the right.  All display list container objects have their own scene

  jou can so easily the steps as much as you want each independently controlled placed anywhere you want.

• The 1473R CAN be used with the real-time operating system of NOR?

  Hello, I am trying to determine if I can use the OR 1473R framegrabber PCIe FPGA in a PC based computer time real OS OR. Anyone know if this is possible? So I think that it should appear to the OS in real-time as a target FPGA that can transfer the data via DMA, but I wanted to make sure the drivers would work in real time of NEITHER.

  I appreciate any info on this!

  lukepike,

  Yes, you can use this device with real-time OS of NOR.

• Starting process in real time

  I have 2 questions related to LabVIEW Real-time. I'm using LabVIEW 2010 Service Pack 1. We have a PXI-8186 controller running the embedded real-time.

  (1) I have my software written to communicate using TCP/IP. The real time software runs the listener 'TCP create' then the 'wait on TCP listener"to look for the connections of the computer. This works well in the LabVIEW project. I then build the executable and deploy it in the system in real time, set up to run during startup. I put the target name to be my program name "Test program.rtexe" rather than "startup.rtexe". I don't know if that makes a difference. I saw the other files in the startup folder of the system in real time that have been named something else. My questions are: the name possible no matter what name we want and the system in real time all programs contained in the startup folder is running or is there another method to specify the programs to be executed?

  (2) is there a way to monitor or to see what programs are running on the system in real time? As the the Task Manager on a windows system. The reason I ask, is that after I restart the PXI system and without using the program of project, I can't connect to my test program running on the system in real time. I don't know if the software is running on the system in real time, is it established that the network interface which it was assumed, etc. to determine why I can not connect with him. Any help on various methods to determine if the software actually runs would be useful.

  Thanks for any help you can give.

  Bill

  Finally found the problem.

  It would seem that, at least in the 2 controllers shipped we have there, controllers have a flag in the BIOS that allows you to disable the file to begin execution on the system in real time. Once I put the flag on the 'NO', everything works. The flag is named:

  'Disable the boot VI' tab 'LabVIEW RT"in the BIOS.

  It is a good option if the boot VI is damaged or was not debugged prior to deployment.

• Real-time application does not work; source code works very well

  The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.

  I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.

  After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.

  I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.

  If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.

  The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.

  Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.

  Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.

  
  

• Realtek AC97 Audio Driver works on my map its microsoft? (under vista and need some sort of broad legalization of real-time system)

  Vista and the need for a kind of wide equalization system in real time for audio... and this driver seems to provide what I need... but will it work on my microsoft Driver card hd audio?  If it is not possible, then what program could I use for an equalizer?

  Hello

  What is the model number of your sound card?

  The drivers are specific to a device.  RealTek drivers don't work for its Microsoft Map, you must install the correct driver for your device package works very well.

  For more information about the driver, see the links below

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

   

  Equalizer you can see link below, also look on the internet for software that can help you in this task.

  Change bass, stereo, and other audio effects in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-bass-stereo-and-other-audio-effects-in-Windows-Media-Player

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• ORACLE 11G 'real-time applies' does not work?

  We have an original database on ORACLE 10.2.0.4 and update us for 11.1.0.7.
  After that, we create backup of database and tried to use the "real time applies.
  
  Principal database can transfer standby database log files and ensures database can also apply to newspapers. The problem is that we can NOT work on 'apply in real time '.
  
  Ideal ant that bad?
  
  = procedures = (standby database)
  
  SQL > bootable media.
  ORACLE instance started.
  
  Total System Global Area 2087780352 bytes
  Bytes of size 2161272 fixed
  1795163528 variable size bytes
  251658240 of database buffers bytes
  Redo buffers 38797312 bytes
  Mounted database.
  
  SQL > alter database open read-only.
  
  Database altered.
  
  SQL > alter recover managed standby database disconnect log file using current;
  
  Database altered.
  
  SQL > select PROTECTION_MODE, PROTECTION_LEVEL, DATABASE_ROLE, SWITCHOVER_STATUS, OPEN_MODE, GUARD_STATUS from v$ database;
  
  PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE SWITCHOVER_STATUS
  -------------------- -------------------- ---------------- --------------------
  OPEN_MODE GUARD_S
  ---------- -------
  MAXIMUM PERFORMANCE STANDBY UNAUTHORIZED PHYSICAL PERFORMANCE
  NO CLIMB
  
  SQL > select process, status from v$ managed_standby;
  
  STATE OF THE PROCESS
  --------- ------------
  CONNECTED ARCH
  CONNECTED ARCH
  CONNECTED ARCH
  CONNECTED ARCH
  INACTIVE RFS
  MRP0 APPLYING_LOG
  
  6 selected lines.
  
  
  = Configuration of primary database init.ora file =.
  
  # for DG Employment
  db_unique_name = DBPMY
  log_archive_config = 'dg_config = (DBPMY, DBSBY)'
  Log_archive_dest_1 = ' LOCATION = / Archive/DBPMY/arc/Vault MANDATORY.
  LOG_ARCHIVE_DEST_2 = "service = DBSBY valid_for =(online_logfiles,primary_role) db_unique_name = DBSBY LGWR ASYNC = 20480 REOPEN option = 15 NET_TIMEOUT = 30'
  *.log_archive_format='DBPMY_%r_%t_%s.arc'
  log_archive_dest_state_1 = enable
  LOG_ARCHIVE_DEST_STATE_2 = enable

  Is your compatible parameter to at least 11.1?

  Best regards
  Robert
  http://robertvsoracle.blogspot.com

• Why is-Web application server on a target at a distance in real time is not start?

  Hi, I need help urgent please

  I was wondering why the Web application server on a target at a distance in real time is not start?

  The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.

  The admin login I use has all permissions to control the unit.

  For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.

  "Web Services deployment failed. You must start the application Web server OR before you deploy a web service.

   

  I have attached a few screenshots

   

  Thanks for the help

  I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.

  I wonder why I can't use MAX distance to reinstall the software on the cRIO.

  The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX

  If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status

  I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet

  Thank you

• UDP playback does not work on a real-time target

  Hello

  I am running LabVIEW RT 8.6.1 on a PXI 8106 RT controller.  LabWindows/CVI for RT 9.0.0 execution engine is also installed that I develop using LabWindows/CVI 9.0.  I'm trying to send some data UDP for an external PC via the network for software running on the controller, but this does not work.  The UDP packets are certainly get sent (I receive on my PC when the transmitter to reconfigure my PC IP address) but the UDP callback function is not called.  The call to CreateUDPChannelConfig returns OK.  Here's the (very simple) code that I wrote based on the example of reading NI UDP:

  #include 
  #include 
  #include 
  
  // Global variables
  static int reader_channel = 0;
  
  // Global functions
  int CVICALLBACK UDPCallback (unsigned channel, int eventType, int errCode, void *callbackData);
  
  /// HIFN The main entry-point function for the Real-Time DLL.
  void CVIFUNC_C RTmain (void)
  {
      int errno;
  
      if (InitCVIRTE (0, 0, 0) == 0)
          return;    /* out of memory */
  
      // Create UDP receive task
      errno = CreateUDPChannelConfig(49152, UDP_ANY_ADDRESS, 0, UDPCallback, NULL, &reader_channel);
  
      while (!RTIsShuttingDown ())
      {
          SleepUS (1000);
      }   
  
      CloseCVIRTE ();
  }
  
  int CVICALLBACK UDPCallback (unsigned channel, int eventType, int errCode, void *callbackData)
  {
      static int udp_received = 0, default_rx = 0;
  
      switch (eventType)
      {
          case UDP_DATAREADY:
              udp_received++;
              break;
          default:
              default_rx++;
              break;
      }
  
      return 1;
  }
  

  All that happens is that software is just waiting for the callback to be called (which never does).  I found this ad that described a similar problem, but the developer was using LabVIEW and although he has found a way round the problem, he was never heard as to why it worked.

  Thank you

  Martin

  Hey,.

  Although the problem is now resolved, I thought that put the code for others see if the same error is encountered. The modified code is tested and works. It is saved as an attached png file.

• Structure of the timed real-time event loop does not work

  I'm a new user for LabVIEW. And I've encountered a problem that frastre really me! Hope someone can help out me. Thanks in advance!

  I just want to use the structure of the event under timed loop, which is important in my extrmely design.

  However, this works very well in my computer (without connecting to the FPGA).

  Once I connect it to the FPGA, then I can still run but there is no response!

  My file is attached. Please someone help me!

  Looking forward to your answers!

  The FPGA runs headless. Structures of the event won't work. What you need to do is to have an application on your host computer when the user presses a button, changes a value, etc.. This event should send a message via TCP/IP for code that runs in real-time environment. Then the real time environment should attribute to the desired value a control on the FPGA.

  As a general rule, programming real-time with FPGA has several layers.

  (1) host-> handles interactions with the user code and communicates the code in real-time via TCP, UDP, etc.. Displays the user sent by RT controller data.

  (2) code in real-time-> tracks headlessly. Manages host code messages, processes the data of FPGA, communicates with FPGA much as the host code communicates with the code in real-time

  (3) FPGA-> no acquistion and passes through PEP in the RT

  The first thing you need to do is to understand the architecture and how all these pieces of the puzzle work together before you throw things down on a diagram.

• cRIO and 9234 modules do not work or communicate via fpga with accelerometers, fpga, connected to the real-time application is also related to shared variables related to modbus slave

  Hello

  I have a compact rio, which has a 4 way frame this chassis is the three modules of ni9234, they are related using FPGAs for application in real time, then using shared variables in the low-speed loop associated with a slave modbus to communicate with the domain controllers, the nor 9234 accelerometers linked to them with option ac coupled iepe on c modules , my problem is the real-time application seems to work well even when power loss occurs it restarts without problem and the fpga written hard disk portable bin files very well, but without an accelerometer connected I get readings of low noise as soon as I connect an accelerometer to one of the outputs 10 it just goes to a fixed number (0.03125) as soon as you unplug it again He returned to readout noise, I ran a scan on the modules and get only a spike when I connect or disconnect the accelerometer, I tested voltage at the pins on the module and I get 22 volts CC which makes it more likely that the material is not the problem, but software is perhaps the cause to hang up, I join the project and files for your perusal. I also realized a new project which, in mode directly linked scan has the module entry in the shared variable and the scenerio even once again. Help would be appretiated.

  Thank you very much

  Jason

  Whren using waveform with the 9234 acquisition, we recommend the following FPGA and RT model.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209114

  It can be extended as a datalogger with:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6388

  or using shared variables combined with the analytical engine

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9851

  The FPGA in all this, as well as the framework of RT have used successfully by 1000s of users.  I recommend giving these a try.

• Read a signal scope works in execution to highlight, but not in real time

  I want to get the maximum value of a waveform to a former stretch of Agilent 54622 via GPIB.

  The problem is that I regularly receive a Visa Read error-1073807339 ("timeout expired before the operation is completed") when running in real time, but NEVER in execution to highlight mode.

  The posts here suggests that the calendar can cause the read to run before writing was able to finish. So, I used one - manually controlled while loop, sequence and blocks waiting for try and ultra Structure separated blocks of reading and writing of overlap between them. But it still does not work!

  Suggestions, please? (Thanks!)

  

  If you happen to open the VI I attached, you will see that I use a serial port. This is because I use a USB of Prologix-GPIB adapter to interface with the scope (I don't have an adapter USB of NOR-GPIB). I used successfully this Prologix adapter for over 2 years to connect perfectly with an amplifier to locking SR830 and several other devices, so I don't think that's the problem...

  What you need is the magic behind fairy!

• That's happened.  I allowed my PSCC update last night.  I opened the program this morning to make a few changes and my work space is gone.  My preferences are gone.  Instead to start my work, I need to spend time reorganizing.  A PAIN!

  That's happened.  I allowed my PSCC update last night.  I opened the program this morning to make a few changes and my work space is gone.  My preferences are gone.  Instead to start my work, I need to spend time reorganizing.  A PAIN!

  It's always a good idea to save and provide for system backups. All you have to do is pick up your Photoshop preferences. Don't copy a folder no big deal.