Start jDeveloper 11.1.1.2.0 after successful installation problem.

Similar Questions

• Mathcad 14 will not work after successful installation

  I have a new laptop and installed as the first software MathCad.  Installation meets with success.  Congratulations after the installation of liscence.  When I open the mathcad 14 in Start menu, the message...  Mathcad has stopped working correctly appears.  It's software I have intalled on XP, so I think that the disc I install is correct.  PTC has provided me with a new license for the new machine (I sent them the hard drive id and they provided new license).  Sometimes, I see a list of unregistered .ocx and .dll files.  I tried to launch the privileges to administrator and re-install/repair.  Same results.  Any ideas?

  Automatic reports have been sent to Microsoft.

  Having spent the last 48 hours trying to solve this problem of talking to TPC for two hours, I was finally able to reinstall the program successfully.  If you get an error message during the installation which results in error 1305.Error (i.e. check that the lib.tar file exists and that you can access), there is a problem with the length of the filepath name.  In addition, it might be a problem with the installation of MSXML 4.0.   Here are the steps I took:

  (1) I created a folder in my C: / drive with a very short name (i.e. two letters).
  (2) I downloaded the file CD_English.exe of the site Web of PTC for Mathcad 14.0.  It is under its support page.  This is the version put out on listening to Mathcad 14.0.  I extracted all the files in the new folder of file with a short name.
  (3) after downloading, I opened the PreReq file and clicked on all the files listed for install.  When you install msxml, go through the Setup Wizard and click on modify.  Make sure that the XML SDK option is checked.  Complete the installation.
  4) go to the setup.exe file and install Mathcad.
  I hope this will work!

• Stuck cursor flashing after "successful installation".

  I went and bought and assembled a personal server to learn ESXi (Tyan MB on VMWare HCL and speced out with 2-8 core AMD proc, 32 GB of Ram, 1.5 to 4 disks) I can't use RAID as it is, but I can live wiothout than learning. Yes, I have invested a LARGE amount of personal money in this!

  After a painstaking hardware configuration on 2 days, I finally pulled above the server had no error with the material, so I installed ESXi. The installation went well without problem. I rebooted, came to the config box, made a few changes to the nextwork settings, and then I think I told him to do something like re-initiallize, I don't remember because I can't go back more!

  When the system is restarted, I got a cursor blinking... that will sit there for hours, no drive or network activity. I tried to reinstall or repair the istall repeatedly with the same result. He finds right after initial start-up as the bios checking, CPU, disks, RAM... then BAM, right to a blinking cursor.

  Thinking maybe it was my readers, I jumped into a disc of Windows Server 2008 R2. I booted from it, she began to install it, it see all 4 of my readers and I went through and re - configure all four drive and deleted all partition is VMWare. I ran the installation and Windows Server set up and works great. So I think that maybe corrected a problem. No, same thing. I even went so far as to format the disk to boot via Raid tool. Yet once... do run install and it ends with "Successful Installation" reboot... blinking cursor.

  This server has been proven as is... and of course, it seems to be no erros material, so ANY help would be much appreciated!

  I'd install ESXi on a USB flash drive, a destination of installation entirely taken in charge. 1 GB or more be done. More is not better, because it won't use more than 1 GB. ESXi extends RAM so he has very little written on the flash drive.

  You must run from a hard disk, if you have defined as ACH or SATA but NOT of RAID controller. I would like to disconnect all except 1 player you sure it's the first disc of the sata channel listed in the BIOS.

  Forum - VMware communities forums upgrade notice will be upgraded the weekend of December 12. The forum will be in playback mode only the Friday 10 December 18: 00 PST until Sunday December 12 2 AM PST.

• Why no games start after successful installation?

  I have recently completely reformat my hard drive and reinstall XP SP3 - since then no games will start for example. Crysis2, Borderlands, Far Cry, etc. Most of them just install apparently successfully, but when I run get them the hourgalss for 10 seconds and then nothing. The only exception is Borderlands that comes up with the following error message:

  C:\Program Files\2K Games\Gearbox Software\Borderlands\Binaries\Borderlands.exe

  This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

  >>

  All of these games used to run fine, my material has not changed, and since reinstalling XP SP3, I have downloaded and installed the latest NVIDIA drivers Creative etc.

  Most graciously accepted ideas

  Fraser

  Hi fraserwood,.

  ·         You have an installed antivirus program?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Make sure you have the latest updates of Windows installed. To update the most recent and then try to install the games.

  Windows Update

• 5.1 or 5.5 want start after successful installation.

  Try to install 5.1 or 5.5 on a Lenovo M78. I put a compatible network card and install it without error. Then I restart the computer and get error 1962 found no operating system. I found this on the site of Lenovo ( POST 1962 error after installing VMWare ESXi - ThinkCentre, ThinkStation ) and makes what he says without change. Has anyone came across this and got a fix for this.

  This could be either a problem with the BIOs, not being able to boot from GPT or a setting in the BIOS as mentioned in the link you posted. If you can not solve this problem with a parameter/update of the BIOS, you can try to install ESXi with a rather than forcing GPT MBR partition table. To do this press Shift-O in the splash screen when you are prompted and add formatwithmbr to the command line.

  André

• To remove the Windows updates after successful installation?

  1. How can I determine what updates to window in the Add/REMOVE program file I can remove that will not harm my PC?

  2. how to identify the critcal programs in my program add/REMOVE I do not use that will not affect the operation of my PC?

  Folders that have uninstall as part of the name (for example $NtUninstallKB282010$ who reside in C:\windows (hidden files) are window Hot difficulty updating folders/files) can be removed safely (providing ever, you wish to uninstall the updates). I recommend you leave these records for a period of at least one month to make sure that the update works correctly.

  These updates can be removed individually or together. To learn more about the update/s go on:
  http://support.Microsoft.com/kb/xxxxxx
  NB: XXXXXX = the actual number, not to mention the "Q" or "Ko."

  Once you have removed the uninstall folders/files, then go to control panel, add/remove programs. Select the title of the corresponding Windows fix on the folder/file of the patch you just deleted, and select Delete. You will get a Windows error. This is because you deleted the uninstall folder/files. Simply choose OK and the entry will be removed from the Add/Remove Programs list.

  Don't NOT delete the folder $ $hf_mig

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  Please note this is only for Windows XP and is not on Vista or Windows 7

  TaurArian [MVP] 2005-2011 - Update Services

• KB956572 and KB981852 are offered repeatedly even after successful installation, updates

  Original title: Windows updates do not install correctly.

  Hi all.

  I have a Windows XP computer that keeps telling me I need to install 2 security updates.

  KB956572 and KB981852.  The problem is that these updates are already installed and appear in my Add/Remove programs.  So I go ahead and install the updates again anyway.  The machine indicates the updates installed successfully.  However after a reboot of the system, updates 2 same pop up still say that they must be installed.

  I have removed/uninstalled the updates in question.  Re-installed them.  Without success.  They are always needing to be installed.  I tried the re-registration of the components of windows updates and wiped the windows update temporary folder, but always the same result.

  Does anyone have any advice or ideas?  Thank you.

  Thanks for the replies.

  I could solve the problem by uninstalling the updates in question.  Download the stand alone on the Microsoft Web site.  Then the installation of each update from command line with the parameter "/ o".  After a reboot, everything was good to go.

• VMWare Workstation does not work after successful installation

  Hello world

  I installed VMWare Workstation 6.0.5 on Win XP SP3 with success, but the program itself does not start, I get no error messages, just nothing happens. Nothing in the logs of the system either.

  When I tried to run the program in Mode safe mode, it worked!... (obviously impossible to start a computer V, but Workstation started very well)

  any ideas?

  Thank you

  Hello

  I think I just found the reason... and a deaf mute.

  I have installed many programs of news lately for the WebCam and connect it to my DirectTV DVR.  So I did not understand that the wrong software belongs to but think it is the WebCam install stuff that belongs to Live Messenger.

  Anywho, the process that prevents any software vmWare installation or execution was "FixCamera.exe".

  Once I have debug more I will update this list.

  It's by chance luck that I found that I was killing various thought process that it could be linked to the virus filters.

  Kind regards

  David

• KB2398382 and updates on Windows Vista 32-bit - KB971029 offered several times after successful installation

  original title: KB2398382 and KB971029 updates on Windows Vista 32-bit

  My PC is running Windows Vista 32 bit.  KB2398382 and KB971029 were listed as installed successfully in the history screen to update windows since February.  However, it is always offered and intalled daily and shown every time successfully.  If it has been installed correctly, why it keeps appearing as important update?  Please help me to get rid of these two updates.

  Hello

  You can follow below link that can help you to solve your problem:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• After successful installation of Oracle R12 have changed/etc/hosts

  change the localhost line
  Of
  192.168.25.105 localhost.localdomain localhost
  
  TO
  127.0.0.1 localhost.localdomain localhost
  
  
  then the installation is successful!
  Why is this?
  
  Thank you

  Salvation;

  192.168.25.105 localhost.localdomain localhost

  TO
  127.0.0.1 localhost.localdomain localhost

  What is your server IP address? Your file/etc/hosts should be like

  127.0.0.1 localhost.localdomain localhost
  192.XX.XX hostname.localdomain host name

  It already covers the installation guide

  Respect of
  HELIOS

• NOR-DAQmx is not available in LabVIEW 8.6 after the installation of DAQmax 8.7.1

  I have LabVIEW 8.0 and LabVIEW 8.6 installed on my laptop that is running Windows Vista.  After successful installation of NIDAQmax 8.7.1, OR-DAQmx is available only in LV 8.0, but not LV8.6.  LV8.6, cannot see setting MAX under "measure i/o.     Can anyone help on this?   Thank you.

  (I need DAQ assistant to my app coded in 8.6)

  Well, the last DAQmx who supported LV8.0 was version 8.7.1. Since 8.7.2 support the LV 8.0 went and appu LV8.6 fell... so there is no DAQmx version that supports both 8.0 and 8.6.

• Nullpoint exception when start JDeveloper 12.1.3 with SOA suite

  One met the exceptions below then start JDeveloper 12.1.3 with SOA suite? This led to I can not save the workspace, very bad.

  JDeveloper version: Build JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S

  Version of the JDK: java version "1.7.0_80".

  trace of the stack as below:

  SEVERE:

  javax.naming.NamingException [Root exception is java.lang.NullPointerException]

  	at oracle.adf.share.jndi.ContextImpl.throwNamingException(ContextImpl.java:671)
  	at oracle.adf.share.jndi.ContextImpl.saveDocument(ContextImpl.java:968)
  	at oracle.adf.share.jndi.ContextImpl.save(ContextImpl.java:986)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.refreshInternal(ConnectionNsChangeListener.java:242)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.refresh(ConnectionNsChangeListener.java:180)
  	at oracle.adf.share.dt.ConnectionNsChangeListener.objectAdded(ConnectionNsChangeListener.java:43)
  	...
  	at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
  	at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  Caused by: java.lang.NullPointerException

  	at oracle.jdevimpl.jps.JpsConfigUtilsImpl.getDefaultJpsContext(JpsConfigUtilsImpl.java:722)
  	at oracle.jdevimpl.jps.JpsConfigUtilsImpl.getCredentialStoreLocation(JpsConfigUtilsImpl.java:1407)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.checkInitCSFStore(CSFDTCredentialStore.java:333)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.fetchCredential(CSFDTCredentialStore.java:588)
  	at oracle.adf.share.dt.security.providers.jps.CSFDTCredentialStore.fetchCredential(CSFDTCredentialStore.java:578)
  	at oracle.adf.share.security.credentialstore.CredentialStore.fetchCredential(CredentialStore.java:187)
  	at oracle.adf.share.jndi.CredentialStoreHelper.fetchCredential(CredentialStoreHelper.java:104)
  	at oracle.adf.share.jndi.ReferenceStoreHelper.saveCredentialsInternal(ReferenceStoreHelper.java:520)
  	at oracle.adf.share.jndi.ReferenceStoreHelper.saveCredentials(ReferenceStoreHelper.java:476)
  	at oracle.adf.share.jndi.ContextImpl.saveDocument(ContextImpl.java:957)
  	... more than 123

  Thanks guys,.

  finally found the problem, one that has created this app, forgot to add 3 files below to Git, after that I added these files, the problem disappeared.

  and I also applied the paths that you mentioned.

  src/META-INF/cwallet.sso

  src/META-INF/cwallet.sso.lck

  src/META-INF/jps-config.xml

  the sit of the guy in front of me has me a bar of chocolate.

  Thanks for the reply.

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Equium L350 - Vista fails to start after the installation of recovery

  Hello world

  I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
  I get: Windows cannot repair this computer automatically click finished to turn off your pc

  After a format and reinstall my computer broken? He is 13 months here for out of warranty

  Hello

  Normally after the installation of recovery your laptop should work fine again.

  In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
  Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

  I also recommend to check the RAM for errors: http://memtest86.com/
  Memtest is a good diagnostic tool for the RAM.

  I hope I could help a bit. :)