Start message

Similar Questions

• Tecra 8000: Cannot start - Message "Insert disc in the drive system" lights

  I have a Tecra 8000, I've not used for about two months. Now when I try to start the "Disk system to insert in the drive" message on the display. I tried three disks in the system, but they have not been accepted and the same message appears. I visited in the 'setup' and changed priorities and tried to floppy, CD-ROM, HARD disk drive, and the same message every time. Is it possible that the internal battery "backup" is completely flat?

  Hello

  Well, I'm not sure about your suggestion of the bios battery. Usually, you will see an error massage low battery BIOS or CMOS battery low.
  Well, but if the battery is low, so all settings are disabled and the BIOS can't save the changes.
  It's not easy to say what the problem is. If there is something wrong with the material if you ask ASP for help.

• Satellite P100 - 160 (PSPAAE) - conflict of resources on how to start message

  For awhile, I had severe performance with this laptop problems. It takes 20 minutes to turn on.

  When he started gives 3 messages in the startup routine:
  ERROR: Conflict of resources-controller BUS series PCI on the motherboard. Bus: 0a, device: 04, function: 01
  ERROR: Conflict of resources-on the motherboard PCI mass storage controller. Bus: 0a, device: 04, function: 02
  ERROR: Conflict of resources-PCI on the motherboard. Bus: 0a, device: 04, function: 03

  Press F1 to resume F2 to Setup

  I tried the re-installation of the recovery disk, formatting the hard drive and all from scratch. I also updated the BIOS
  The end result seems to be that the startup still takes time, with the same messages, but once started the performance is improved.

  These devices appear in device and the warnings of problem management.

  Any thoughts on how to solve it please

  Help please

  Hello!

  It looks like there's something wrong BIOS or maybe hardware

  Have you also tried to reset the BIOS to default settings?

  I think that the recovery disc can t solve this problem because it appears after the current load to run BIOS. This means that in the worst case you have to go to an ASP and ask a technician for help.

  Good bye

• Satellite A200-13 m - do not start message bootmgr

  Hello

  My Toshiba Satellite A200 does not start, after that I enabled the recovery partition from Vista to reinstall my thought OS that I will be able to start the laptop hidden partition, but I get the message bootmgr and ctr + alt + delete to restart.

  My question is: How can I make my pc from the portion of recovery to restore my OS?
  Help me please. Thank you.

  The recovery partition is damaged or the HARD disk is maybe defective.

  How did you run Recovery? You hold the key to zero when you turn on the laptop?

• computer does not start message "autochk.exe not found" followed of "stop: c000021a (fatal system error.

  computer does not start.

  the screen message is: "autochk.exe not found."

  second message is: "stop: c000021a (fatal system error)".

  «the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»

  "the system is stopped.

  Hi Bobzurcher,

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

   

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Let us know if that helps.

• When my computer starts message on the desktop is: "' Office impossible to load or run C:\Users\Ray\AppData\Local\Temp\ccrss.exe' specified in the registry" "

  "office impossible to load or run C:\Users\Ray\AppData\Local\Temp\ccrss.exe' specified in the registry."

  Make sure that the file exists on your computer or remove the reference to the registry. »

  Never had this message before. Sought a "registry". not been found. Looking for a 'Temp\ccrss.exe' not found.

  What should I do now?

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes to your computer?

  I suggest you to follow the methods and check.

  Method 01:

  Step 01:

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 02:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run Microsoft safety scanner scanning from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• age of empires II gold edition does not start message is windows has encountered a problem

  Computer crash to reinstall factory disc.  Have reinstalled Age of Empires II gold Edition, but it does not start, the message of windows is windows has a problem and we will contact you as soon as a solution is available.

  Tried it does not work, the installation was not the problem. Something happened and it lacked the EULA and my security system blocked the program game to start.

  All fixed up now I thank you for your reply and your help.

• Starting message questions...

  I have a Pavilion ZE4901US laptop, using XP home.  On startup, I get the message "missing or corrupt \system32\ntoskrnl.exe please reinstall a copy of the above file.  I went to "F10" on a start, did a "disk hard self test", and the result was "#1-07 Fail".  What is happening with my laptop?

  Thanks, I got it running with the XP operating system CD.

• Palm Pre crazy symptoms: 'phone in offline mode', won't charge battery, won't start, message error "an error has occurred that cannot be resolved.

  This is a long description of a series of problems with my new Palm Pre. You can search text to find your specific problem. There is no solution in my post. Looking for possible answers in future responses.

  I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone was working fine. Last night I plugged the phone and updated the operating system. After, I've selected "Done" and went to bed.

  -First set of questions: 'Phone offline', will not charge battery.

  In the upper left corner of the phone, there is the message "phone offline. Although the phone was in charge all night, it reads "battery of 26%. I called the general number of on the Sprint tech support and we tried the following things:

  (1) the phone reboots (press on and hold the power button / stop, then select 'Disable'. After setting down, hold down power button / power stop.)

  (2) to reset the phone (several ways - call tech support so that you do this properly)

  The individual Sprint and then sent me to another tech support person, likely to level 2.

  -Second series of questions: message error "an error has occurred that cannot be resolved;

  #2 Sprint tech support person had me also to restart and reset the phone in a number of ways. In his own words 'we tried all the palm pre stuff I know' and whenever the phone was insensitive. Often, we received the message error "the phone is in offline mode. We did a full erase and after that the phone will not re-start is no longer. At this point, the error message came up saying "an error has occurred that cannot be resolved" that referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky with a translucent box on background with white text.

  #2 Sprint tech support person then me connected with the support of the Palm and the dance continued. Yet once, we tried a whole bunch of reset and restart and the erasure of the options. Palm support asked me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. Although that was the case he had hold the button "volume +" and connect the phone to the charger. This caused a USB symbol will appear on the phone. When the record was complete, I got an error message which could not run the file. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He me transferred to another person from Palm support that works with Mac users.

  Palm #2 tech support person advised me that I should have selected the download option 'mac' on www.palm.com/rom. I verbally walked him through the series of Web pages, telling him it is said that you need Windows (any version) or Mac (whatever version), but that at no time was there a possibility to download another WebOS doctor for different operating systems. After an exchange of views over she told me that she would have to have someone call back me tomorrow.

  -Third series of questions: phone stuck on the USB symbol.

  So for the moment, the phone is completely useless. Not fantastic. I started the mac on Windows 7 and downloaded WebOS Doc and received the same error message. I also ran Windows Vista virtually and received the same error message. Later this afternoon, I head into work to try the same thing on Windows XP.

  In the meantime, I got on this forum and found a thread that has provided a direct link to the necessary file:

  Palm.CDNetworks.net/Staging/ROM/webosdoctorp100ewwsprint.jar

  After downloading this file, I realized could totally be a virus, I was able to get WebOS Doc work on my computer. It took that I recharge the phone before, and now it's on the screen that says 'do not disconnect your phone' and the full file of 3%. Only... it was completed for almost 30 minutes to 3%.

  I hope that Palm will follow-up with me tomorrow, but I'm leaving on a business trip at 7:00 and I would love to have the thing work. All suggestions are welcome, even if you can just tell me how to get her think disconnected safely before my flight tomorrow. I want to get through security with my phone plugged into my laptop.

  Thank you.

  I picked up the phone at the local Sprint store and the sales ago replaced the phone. They were unable to understand what went wrong and, essentially, has declared a complete failure of the unit. I'm sorry that I'm not able to offer better news, but I hope that this info is useful to you.

• Equium L40 - Windows won't start, message on screen

  Hello

  I have a Toshiba Equium L40 - 17M.
  Recently when update my antivirus, my computer tried to restart but now does not load correctly.
  Now whenever I try to turn on the computer, after the initial configuration screen Toshiba I'm greeted by the following message is displayed in the upper left corner of the screen.

  Playing a disc error has occurred
  Press Ctrl + Alt + Delete to restart.

  However, this message seems right once again!
  Suggestions please!

  It could be a problem of file system corruption, in which case you can connect the HARD drive to another PC and run CHKDSK on the drive.

  If no help, then check the bad sectors HARD disk using the Test advanced in Hitachi DFT (Google is your friend)

  Or you can try to run your recovery discs recovery. This reformatted HARD drive, so you will need your first of all if the data backup sound still there (you can use a USB 2.5 "HDD adapter).

  If you really need your data back, there are data recovery programs, you can download to search the HARD disk for lost files.

• Satellite Pro 6100 cannot start - message PXE - E61 and PXE - MOF

  My dad just bought me a satellite pro 6100 for United off ebay and when I turn it on the toshiba screen comes up, followed by: PXE - E61 and PXE - MOF. as I am a total blank computer I have not a clue what to do! any ideas...? :)

  Hello Naomi

  Don t worry, it sounds not very badly. I think that you will solve this problem by changing some settings in the BIOS. ;)

  To my knowledge, this message appears when the LAN option has been fixed at the beginning of the boot order. So solve this problem to get into the BIOS (ESC and F1) and then change the order of Boot CD Drive drive HARD etc...
  Please set the LAN at the end.

• Takes 5 minutes - start Message: Configuring Windows Update 0% complete do not turn off your computer. Windows 7 Professional 64-bit system, works fine, but I get this stupid message whenever I start.

  How can I get rid of this stupid message and have a normal boot.  This took place yesterday, and it's a real pain.  How can I get rid of this.

  I had this problem 2 days in a row. Windows 7 Edition Home Premium. "Automatic updates" not ended and I got the same message on restart and had to wait for it to timeout.

  I tried "manually" update, and that fixed the problem.

  Go to the control panel. Click on system and security. Click on Windows Update and follow the instructions. I selected the updates recommended, installed and rebooted. Problem solved.

  (I have no idea why this problem occurred. In the "Windows Update", I opened the "update history" and saw the 'Impossible' updates, but I don't dig deeper than that.)

• 'Bad image' of Windows XP Start message

  I mean bad image error - services.exe - watch DLL startup windows\system32\pavwait C:\. DLL is not a valid windows image. My PC starts after I clicked OK about 20 times. Have you tried troubleshooting from microsoft Web site support various fixes but the error persists. Can any advise how to solve this problem!

  You run Autoruns and use the search feature (CTRL + F) to find pavwait.dll in the list? Once you find it, uncheck the box next to the line item.

• When I try to start message says press f1 to retry or f2 to setup the options not able to go to f8 to boot into safe mode

  I can't get the pc to start or can I go to f8

  Hello JoAnnBuhler,

  If we're not boot after BIOS, then we are probably experiencing hardware issues - or a problem setting in BIOS.

  It would be best to contact the manufacturer of your system on what they will be better able to diagnose the problem.

  Best regards

  Matthew_Ha

• Want to start MESSAGE 23 failure - d010ea

  Greetings,

  I'm trying to untangle a machine for a friend.

  It's a pc touchscreen feel like 23-d010ea.

  The initial symptoms were - made power cord in and immediately the main fan has started running, this continued until the power cable has been removed.

  So, I removed the RAM, hard disk and DVD, powered up and down and reconnected everything - no difference.

  Then I removed and reinstall the CMOS battery - this changed the symptoms to the machine sat quietly, as would be expected, when the power cord is connected. The white light by the power connector is on. By pressing the power button on the top of the machine starts the fan, which breeds. It continues for a few seconds, then the powers of the machine down.

  The two white LED side (HD?) don't light up at all. One of them blinks briefly just before the machine goes off as the main HD is accessible (or told to close maybe, not sure).

  All the tests of disconnection and reconnection repeat after behaviour change - no difference.

  Is it a motherboard failure?

  There is no activity of the screen - it remains off all the time. There is no beeps to be heard (I?) assumed that the machine uses the speakers under the screen - I haven't seen or had to attempt a repair on a such system before. I'm used to the areas and the separate screens (though I have some experience with the maintenance of the laptop and component swaps).

  Linux user since 2002

  Try to recover the BIOS as described in troubleshooting procedures. There are two methods.  As I said... It may be too late.

  "but the machine seems not record not not keyboard strokes. It is indicative of a problem of failure or BIOS corruption.