Start of start for the HP logo
I bought a HP dv8000 used and at startup, it shows the projection of COMPAQ logo on the screen, not the HP logo as it should. I guess that someone put a Compaq motherboard or whatever in it. My question is, what can I do to clear the Compaq logo and back HP logo at startup? On the MB logo "storage"?
Also, if it's a Compaq MB, can I use the HP Bios updates? Or should I stay with using only the Bios Compaq upgrades?
Thanks - Bill
Compaq and Hp are now one company. HP sells Hp models and Compaq. Compaq marketed to business appearance with HP models for entertainment. the post merger appeared dv8000 do you infact have a HP unit. but it's the things compaq. The start screen is coded in the bios and there I have no way to change that. It does not affect the performance and you can do all the updates on our website, no problem
Tags: Notebooks
Similar Questions
-
Hello!
I recently bought this laptop with the intention to replace the hard drive (1 TB HDD 120 GB SSD), as well as upgrading the ram from 8 GB to 16 GB. The problem is that I have improved these things before you start for the first time. And now it complains that it cannot find a device boot, even when I insert a USB key with windows 10 iso on it. Or a cd with windows XP. He needs to have the HDD windows 8.1 original in it on first commissioning? It took a while to replace parts...
Thanks in advance.
That's very true, I used gparted before checking this again, and it was corrupted. Very well! I ended up installing windows 10 home using a free student license. It's perfect, since I have windows 8.1 before running on the 1 TB hard drive and it was filled with bloatware, thanks to HP (no offense). So, it is nice to have a clean install. Everything works fine now, I had to change some settings of 'Legacy Boot' in the bios to boot from the USB.
-
I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:
"Before you can use this feature, OneNote 2010 must start for the first time."
Restart the PC does not solve the problem either. How can I get the printer to work?
Hello pietpompies7
See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.
-
Good start for the virtualization server?
Hello
I would like some advice on a good start for the virtualization server. I would like to run the more recent, free of VMware ESXi 4.1 edition (vSphere Hypervisor?) on the supported hardware (where the RAID can be monitored with VMware).
For example, something like this: http://www.Dustin.se/pd_5010442452.aspx
I guess the 8 cores on the server above is a better choice than faster Intel 4 processor (as each VM gets a dedicated core?).
Any input/advice/server suggestions are welcome!
Thanks in advance!
Bolgard wrote:
OK, so if I understand you is good, I could install VMware ESXi 4.1 on a USB key inserted at the back of the R210 server, and I would have a facility "embedded"?
No, not really. "Embedded" means the purchase of a server preconfigured with ESXi hardware already installed by a few big name of the seller. "ESXi Installable" means that you install ESXi yourself a CD, and it could be placed on a number of devices supported, including USB. It will always be "ESXi installable" However, if it has nothing to do where actually install you it.
-
Need to Exchange new logo for the old logo
Hello. I don't know if this question belongs in this forum or another, but here goes.
I have a .pdf file I want to use in a presentation next week. The problem is, we have not used this .pdf, we changed our logo. How to switch it on only one image on another?
And Yes, I'm fairly new to Photoshop and all of its elements, so that you know.
Thanks in advance for your help.
It's something you want to do in Acrobat (the application, not Adobe/Acrobat Reader) or in the application that was used originally of page layout and create the PDF, as InDesign presentation.
You want to use for Photoshop (or Illustrator) is to create or adjust the image you want to use for the new logo. When you have the logo as you like, then you use Acrobat or whatever layout request to insert (or link to...) the new logo in place of the old. Then generate you a NEW PDF.
-
2013 end Macbook pro is not start after the apple logo appears
After the last update for mac OS, the laptop is not initialized. It shows the apple logo and the startup chime and stays there. Only I can enter without a problem for running the diagnostics by using Option d. diagnosis
Try to start in safe mode by pressing SHIFT held your computer starts, if this fails, reinstall the system with recovery.
-
Lenovo Z500 turns off a few seconds after the round. He started for the second time.
Hello
For several days my Lenovo Z500 is a strange problem. When I push the turn on button laptop starts up and shuts down after a few seconds when the windows logo appears. When I push again the button it starts fine with no problems.
I have a Windows Professional 10, everything was ok for a while and now I don't know how to solve my problem.
I'm going to enjoy all the ideas.
I thought to reinstall Windows, but maybe you know the solution to fix it.
P.S. I have the latest version of the BIOS installed.
Kind regards
Albert
I think I solved the problem.
Problem has been activated "quick start" in the power settings.
To turn off the quick start, follow these instructions:
- Open the start screen
- type po drank directly on the start screen (power buttons short for). It will take you directly to the applet "change what the buttons to" in the search results.
- Click on the link "Change settings that are currently unavailable" to put at the disposal of the shutdown options.
- Uncheck the enable (active)-quick start .
- That's all. Now the quick start feature is disabled.
Now everything works fine, z500 boots each time correctly with the first run.
Thanks LenBlazer.
-
Satellite C660 is unable to start for the first time
I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K
For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).
Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.
The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.
If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.
He has not indicated in the error logs files
I did a full reinstall of HARD drive recovery system.
I did a full system reinstall from recovery DVDs.
I did a full system reinstall from DVD disk a hard new recovery.
I replaced the ramI tried to update the bios, but get an error
BIOS version more than 200
Battery capacity over 10%
AC is attachedHello
The description of your problem is, for me, quite confusing, and I do not understand your problem.
Can your notebook load and start the preinstalled operating system or not?Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.
-
Failed to start after the windows logo screen, please help.
Original title: STARTUP DO NOT FULLY
Hi, I run windows XP Home Edition on my laptop, when I switch it on it boots until the windows logo and no more, can anyone help please.
I tried F11 to safemode etc but is still no more than the windows logo.
You must be repeatedly tapping / pressing the F8 key before Windows starts to load to access the Advanced Boot Options menu to see the Safe Mode options :) Keep and tapped F8 until you see the Advanced Boot Options menu.
If you miss the niche F8 and XP starts to load, you missed it, and you have to start over.
-
Problem starting for the Service of Notification of system events
Computer Vista Home Basic.
The SENSE is reported as won't start do not. Looking at the Services screen we're still in the starting state.
How can he start correctly?
Hello
First thing I'd do is uninstall all the HP software, eliminate him as possible points of contention. If possible, also do a system restore to a point before for the initial installation.
This service would not affect internet connection as such, it watches DCOM, it is not fire events to network. My thought is that the HP software has caused a problem with DCOM, then removing is the first step. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Why pc does not start, and the windows logo hangs after installing the update?
often, I can't start my computer after installing updates. I push the button the windows logo hangs and windows did not start so I manually press the button close. After I press the button again the Startup Repair tool appears so I can get the windows works normally. but happening permanently since buying the laptop 2 years ago, but not after every updates. It happens randomly.
Hello
Method 1:
I suggest you to use the Windows Vista disc to perform a Startup Repair:
http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
Method 2:
If the method above does not help then you can check the link below and check the troubleshooting steps to resolve the problem.
-
3000 N200 starts the first time, but he will start for the third time!
Hello
My old N200 of 2 years has recently decided not to initialize the first time. Usually it starts the third time lucky this changes in the cold outdoors when it may take 7 or 8 will but or does not start later. I think it started after that I left the machine running on battery power a day forgotten and the next day it took a few goes to start after plugging it load up.
When it wont start the fan lights just like the Windows screen comes on and after a few seconds, it dies as if I had pressed and held down the power button as you would to turn off if the system was no answer, and he makes the same noise. When it finally starts the fan is silent!
This one worked!
Thank you very much
I don't know that I have never done this? Certainly not intentionally. Well, I seem to have solved the problem by resetting the CMOS as described elsewhere in the forum. Machine boots first time every time now, so he must have had something to do with it. Or I also during the same operation was released and returned to the my 2 GB memory add on and I think that may be related to poor startup performance if it is not inserted correctly.
What a relief and after being where I bought they had no idea and wanted to send it away etc etc and I pay £11 a month for such a service, I had a lot more less than an hour on this forum
Thanks for the reply
-
PR Pro CC 2014 not start (for the first time)
First CC 2014 wil not start on my iMac. (for the first time)
It shows:
"Adobe Premiere Pro coult not find capable video game modules. Please update your video display drivers and commissioning.
My iMac:
10.9.5 O.S.
3.5 GHz i7
32 GB 1600 MHz DDR3
Video:
NVIDIA Geforce GTX 780 m 4096 MB
I have foud a CUDA driver:
version 6.5.18
What should do?
Hello
Please introduce this place on your computer:
Click go on the top go to ~/library folder-Type and then go to the application folder - rename the old adobe adobe folder
return to ~/library then go to preferences and rename the old adobe adobe folder
Access documents and rename the old adobe adobe folder.
After doing this, you will be untied your sync settings and custom keyboard shortcuts and the effects, if any.
Thank you
Arjun
-
Start for the DAC Server services is having hung
Dear all,
We have recently installed DAC 10.1.3.4.1 with patch 14306642 on AIX 6.1 64 bit system.
Whenever we try to start the server DAC, is getting hanged to the Infoline: CONNECTION_ISSUE repository of end of the poll even if DAC server started, but the command is not getting out, it's getting stuck on this line.
Please find from the log file.
3 SEVERE Tue Nov 19 05:22:44 THIS 2013 verification the localhost with the values defined in the DAC repository!
4 INFO Tue Nov 19 05:22:44 THIS addition of 2013 server name: N02AST0010
INFO 5 Tue Nov 19 05:22:44 THIS addition of 2013 replacing servername: localhost
INFO 6 Mar Nov 19 05:22:44 THIS 2013 linked to port 3141
INFO 7 Mar 19 Nov 05:22:44 THIS 2013 creation ClientMessage dispatcher with 2 worker threads
INFO 8 Mar 19 05:22:44 THIS 2013 SERVER_NETWORK_MESSAGE Nov: Created ClientMessage dispatcher with 2 worker threads
INFO 9 Mar 19 Nov 05:22:44 THIS 2013 com.siebel.etl.net.ClientMessageDispatcher registered with HeartBeatManager
10 INFO Tue Nov 19 05:22:44 THIS 2013 repository CONNECTION_ISSUE ending on election
Please let know us is something false.
Thank you and best regards,
Amit Shah
I'm not sure if you really read my message, I said it clearly that you need to use the nohup to be able to run the background process even you leave session or ctrl + c etc.
I think you might be starting as cette./startserver.sh and then after a while you leave just session or do ctrl + c that crashed the server DAC process.
Order to better run the start as ce./startserver.sh) 1 nohup command > dacserver.log 2 > & 1 & ou2) nohup./startserver.sh &
so, in this way, it can work in the background
Check if this may help and close the message
-
Need help to configure Auto-start for the database
Hello
DB version: 11.2
OS: RHEL 5
Please help me
I want to configure the database and listener in auto-start during the startup process of the operating system.
ConcerningStep 1 of the oracle user
CD $ORACLE_HOME/bin
VI dbstart
VI dbshutchanged the
LISTENER_ORACLE_HOME = $1
TO
LISTENER_ORACLE_HOME = $ORACLE_HOME
Step-2 of the root user
VI /etc/init.d/dbora
#! / bin/sh
Oracle # these scripts runs the listner and Oracle database server.
#
# chkconfig: 345 81 81
Description #: this is the Oracle
## Define ORA_HOME as equivalent to the ORACLE_HOME
# from which you want to run dbstart and
# dbshut
# the value ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME ServerORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
ORA_OWNER = oracleIf [! f $ORACLE_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
Output 1
FIcase '$1' in
'Start')# Run Oracle databases:
# The following command assumes that the oracle connection will encourage not the
user # all valuesknown - $ORA_OWNER - c "start ORACLE_HOME/bin/lsnrctl $".
Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbstart.
;;
'stop')# Stop the Oracle databases:
# The following command assumes that the oracle connection will encourage not the
user # all valuesknown - $ORA_OWNER - c "judgment of $ORACLE_HOME/bin/lsnrctl.
Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbshut.
;;
ESACExit 0
Note: Please check your ORACLE_HOME
Step-3 of the root user
chmod 755 released
chkconfig released onVI/etc/oratab
ORCL:/U01/app/Oracle/product/10.2.0/Db_1:YStep 4 Test the automatic start of the root user
stop /etc/init.d/Dbora
stop /etc/init.d/DboraOr
Restart the server
You can also view
http://www.Oracle-base.com/articles/Linux/automating-database-startup-and-shutdown-on-Linux.php
http://docs.Oracle.com/CD/E11882_01/server.112/e10839/strt_stp.htm#BABGDGHF
Maybe you are looking for
-
install upgrades to 31.0 times out during
HelloWe try to update our clients to 31.0, the update seems to timeout when installing. This seems to be related to the proxy server, it is possible to get a white list of sites to be added? Thank youJoe
-
I realized a web page that uses svg images. One of them is here: http://donwagner.dk/JZSS5.4.svg. The svg is produced by Adobe Illustrator, CS5 version. Seen in any browser, the images look good at any magnification, but when I print the page in Fire
-
SATELLIT C870 - SD Card reader cannot be used
Hi all I recently bought a satellite C870 with Windows 8.(Realtek?) internal SD card reader is available on this laptop. But the reader (usb I think) will not work properly. I only use this card successfully sd reader only 1 time. After a restart of
-
Hello I wrote the MATLAB code to produce a square at a certain frequency to 0.01 seconds. The code performs a loop then back to produce a similar squares but at a different frequency and it then concatenates up to the end of the first square. There a
-
I get updates for KB2604092, KB2656369 and KB2686828.
I get updates for KB2604092, KB2656369 and KB2686828. I ran set the of http://support.microsoft.com/kb/910339 which erases, but he's back on my PC in 10 minutes by running. The patch program has been run 6 times on different days now. How to clean an