Problem starting for the Service of Notification of system events

Similar Questions

• "Error 1079: the account specified for the service is different from the specifiedfor account other services running in the same process" when I try to start it manually to the top of some program services.

  Original title: How can I restore my services to the default state.

  Here is the error message when I try to start it manually to the top of some service programs.

  "Windows cannot start the Diagnostic Policy on Local computer service."

  "Error 1079: the account specified for the service is different from the specified account.

  for other services running in the same process. »

  Hi raospent,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what services you try to start?

  You can follow this link & check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Hope the helps of information.
  Please post back and we do know.

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation Partition problem (allocated too expensive for the Service Console?)

  Installation Partition problem (allocated too expensive for the Service Console?)

  RAID1 (15K 146 GB SAS) on Dell R710 and VMFS is on table EQL.

  What I did during the ESX4.1 excavation, it's that I have used ALL the space in 146 GB (mainly for / and / var), after adding this ESX host to vCenter, VC and EQL ASM/VE started to complain about the following points:

  1 VC: health check of localstorage warning (only has 245 MB left on 146SAS localstorage)

  2 EQL ASM/VE: warning rootFolder folder (due to the above)

  I thought that he is authorized to use all the space for / (50 GB) and / var (50 GB) in my case for only 146 GB, I don't think I need to leave any space on the installation disc.

  Could someone share some lights here?

  Thank you

  As you can see SDS use all the SDC VMFS partition space.

  This create the alarm.

  The thing really confused me why I have to leave a space on the disk at all?

  Technically there is no reason to let the space... but also no reason to have a big service console

  Usually, you need 10 to 20% free space for each snapshot data store and Exchange files... but in your case, you will not have these files.

  If you have any problems, but you receive the alarm until you do not disable them on this specific data store.

  PS: I suggest you switch to ESXi, is quite simple and it doesn't have this strange vmdk for the "console".

  André

• HP Pavilion Notebook 15-ab083T: laptop upgraded before even starting for the first time = problem?

  Hello!

  I recently bought this laptop with the intention to replace the hard drive (1 TB HDD 120 GB SSD), as well as upgrading the ram from 8 GB to 16 GB. The problem is that I have improved these things before you start for the first time. And now it complains that it cannot find a device boot, even when I insert a USB key with windows 10 iso on it. Or a cd with windows XP. He needs to have the HDD windows 8.1 original in it on first commissioning? It took a while to replace parts...

  Thanks in advance.

  That's very true, I used gparted before checking this again, and it was corrupted. Very well! I ended up installing windows 10 home using a free student license. It's perfect, since I have windows 8.1 before running on the 1 TB hard drive and it was filled with bloatware, thanks to HP (no offense). So, it is nice to have a clean install. Everything works fine now, I had to change some settings of 'Legacy Boot' in the bios to boot from the USB.

• registration for the service is missing & windows update does not not in windows 7

  I got the error "registration for the service is missing or corrupted" when I used the diagnostic download bits of one of your answers to someone else. I can't download the updates of windows from 08/10/16 - the latest downloads on 08/02/16. I did a full scan with McAfee & there is no problem in that. Given that the system sought & found these updates 08/10/16, the fan noise has served continuously as in a loop. I managed to stop that noise will 'services.msc', choose 'windows update', by selecting Properties & stop. If I start it again, it seems to go on and on but updates still do not download. I have Windows 7 Home Premium on a laptop. Can you help me?

  1. have you ever run the McAfee Consumer products removal tool?

  • Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. "Leftovers" can be here your troublemaker.

  2 - is the same computer - not necessarily the same problem - as in one or more of these previous threads of yours?

  http://answers.Microsoft.com/en-us/Windows/Forum/all/unable-to-install-Windows-updates-kb3035490-and/a2837314-dd69-422e-9798-2ff937e375d2

  http://answers.Microsoft.com/en-us/Windows/Forum/all/Windows-Update-not-working-error-codes-643/b1dee3ce-9818-4e69-93c3-7b1a9489d036

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-Windows_7/Internet-Explorer-9-not-working-with-some-apps/8dd4ee4a-04F9-4021-a3f5-a3764f403852

• Windows could not connect to the Service Notification of system events

  Yesterday, everything was normal before turning off my computer. However, I saw a message "that Windows could not connect to the Service Notification of system events" after I turn it on now.

  My operating system is "Win7 Ultimate". What should I do to fix this?

  Hi Aporch,

  You can check if System Event Notification Service is enabled and set to automatic.

  Here's how you do it;

  1. Select start > run > and type services.msc.

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.

  If this does not help, try this:

  1. click on the Start button.

  2. type Cmd in the search text box.

  3. press on Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  4 type netsh winsock reset at the shell command prompt, and then press the Enter key.

  5 restart the computer

  If please reply and let us know if your problem is resolved or if you need further assistance

  Aziz Nadeem - Microsoft Support

• Satellite C660 is unable to start for the first time

  I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K

  For the last year laptop worked fine in the last 2 months, however he had a problem starting. The first starting attempt of the day, it does not start, it is consumed on gets in front of splash screens after the cursor flashing in the top left then hold with a blank screen (not the cursor just a low glow).

  Hold down the power button / turn off and turn on again then the computer will start. sometimes (not always), it will ask to start normally or repair.

  The laptop works perfectly in use does not fall out of mistakes. Restarting the laptop works as expected close and turn on/off after 5 minutes works great.

  If the laptop is left for an hour or more, it starts the same as above. turn off and turn on/off the system will start but with boot normally the question.

  He has not indicated in the error logs files

  I did a full reinstall of HARD drive recovery system.
  I did a full system reinstall from recovery DVDs.
  I did a full system reinstall from DVD disk a hard new recovery.
  I replaced the ram

  I tried to update the bios, but get an error
  BIOS version more than 200
  Battery capacity over 10%
  AC is attached

  Hello

  The description of your problem is, for me, quite confusing, and I do not understand your problem.
  Can your notebook load and start the preinstalled operating system or not?

  Enter the BIOS and set it to default settings. After that restart your laptop and to describe what is happening exactly.

• Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

  Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
  Message: Installation error prevented the service pack 2 windows systems (KB948465)

  http://support.Microsoft.com/kb/956702

  «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

  Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  http://support.Microsoft.com/kb/947821/

  "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

  If the above solves the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Registration for the service is missing or damaged

  Hello

  I ran a scan with troubleshooting Windows Update tool and it came with this error: registration for the Service is missing or damaged. How can I fix it? Any help would be greatly appreicated!

  See you soon!

  Hello

  Usually, you get this error during the installation of the software updates. If Microsoft found some problems in the digital signature of the update is when you usually get this error.

  Take a look at this and see if this helps:

  How to set recording of corruption problems MSI software update:

  http://support.Microsoft.com/kb/971187/en-us

• HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  When you see this error message?

  IF its all in trying to make an update, then:

  Make sure that the following services are listed and started. in "search programs and files" type "services" (without the quotes). In the results, click on 'services' and the services window should open.

  Make sure that the following is listed and started:

  Background Intelligent Transfer Service

  The base filtering engine

  Cryptography Service

  DCOM Process Launcher service

  Remote procedure call (RPC)

  RPC end point mapper

  Windows Modules Installer

  Windows Update

  IF it's trying to make an update and the foregoing is listed and running, then try this fixit - https://support.microsoft.com/en-us/kb/971058 to see if it helps.

  PS - if one of the services above are not listed, or is listed but not start, then see if you can update your antivirus program and run a scan full to see if it detects malicious software. Then, run the fixit above.

• The unit 3.1 (3) change of password for the Service account

  Hi all

  I am aware of the link and procedure on how to change the password of the service account of the unit 3.1 X here: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml#topic2

  My question is this. I have 5 unity servers that use this service account in any area, which includes Europe and the United States. If I change the password in AD all services will continue to work with the old password as long as they have not restarted with the old password? I know I need to change the password for each service that uses the account and then restart the unit, but since AD taking so long to reply, I was hoping to change the password of the account one day and then the next day or even longer when I have planned for my failure, I can then change the password for the services on each server and then restart the unit and make sure that replication is complete and the services start again with the new password.

  I think as long as I do not have to restart services can I change the password of the service account in AD a day or two before I schedule my outage can I change the password for all services, and then restart the unit. I know that I can force replication, but it would be nice to be able to change it in advance as long as it is not flexible, whatever it is. Even force the replication takes a lot of time in our environment and I want to be sure, can I change well in advance without having a negative impact.

  Thanks for your time!

  Keith

  If you change a password for a domain account, it should respond immediately through the Organization as AD treats this with the highest coastal.

• For psc 1315: before you can use this feature, OneNote 2010 must start for the first time.

  I installed the downloaded software (Windows 7) for my old psc 1315 (all-in-in-one). It printed the page sample after installation, but when I want to print what this or else it gives me the following message is displayed:

  "Before you can use this feature, OneNote 2010 must start for the first time."

  Restart the PC does not solve the problem either. How can I get the printer to work?

  Hello pietpompies7

  See the following Microsoft Office Blog article. It deals with OneNote arise while you try to print.

  Microsoft OneNote is misuse of your print jobs?

• I paid for the service twice in the same day for mistake

  Hello, I paid for the service twice in the same day for the error, and he was not of conclusion of download. I dind't one of the programans and Noah have to pay. You can check my order? and possible restart at least adobe first pro?

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Double charged for the service and support will not help!  Can you?

  Anyone know the secret to get a real person on the phone at Adobe?  These cat overseas representatives are not cut it!  I have a detailed transcript of a chat where the rep has no idea and can't even articulate their responses well enough to be called support. My problem is simple:

  Last month, Adobe somehow has not received my automatic membership via PayPal payment, even if the PayPal transaction has been completed, and the funds have been removed and delivered (I have documentation that Adobe don't want to watch).

  I used the support available to me - a poor attempt at a service of cat - nothing works.  The representative was informed of the situation and proceeded to charge me for the service once again, even though I told them I had already been charged, and it was a mistake on their part.  Now I have an another $49.99 charge on my account.  So that re - activate my subscription, it wasn't what I asked.  When I contacted PayPal about this, their response was to cancel my subscription, completely, but still no refund my second count (they also have a system of foreign aid, under normal)...  Now, I'm in the 'warning' of 30 days period before my service is completely turned off and not sure if I want to trust Adobe to my money, once again.  I contacted my bank - that should be a last resort, but I guess that is where I am, now.  They are willing to work with me, because I can pick up the phone and explain the situation to them.  Why I can't do this with Adobe?

  My last option is to take advantage of free legal assistance for my company and sue Adobe for $49.99, which seems silly, until you realize that it's free, and Disney has AMAZING lawyers at our disposal.  Is this really necessary?  Why am I put through so much aggravation due to the error of Adobe?  If I return, I would expect compensation for my trouble.  At least a few months of free service for the overload and my months of unrest.  Otherwise, affinity looking really tempting...

  Hello

  Please see Contact Support FAQ: impossible to reach support via the link "Contact us"

  Hope that helps!

  Kind regards

  Sheena