Start quick buttons__

Similar Questions

• Start quick edge E330 and Intel

  Hello

  I have the new E330 Edge with 16 GB SSD card. So it's ready for the quick start of intel. Problem is that I'm not sure that it works. That's what I have / did (according to the tutorials in other forums):

  1. enabled in the BIOS
  2. "In waiting for 30 days" in power manager enabled (I think it's the end of Lenovo for quick start intel) http://screencast.com/t/OLRLgSHrPF
  3. created a primary partition, ID 0 x 84 on the SSD
  4. disabled the hibernation (powercfg /Hibernate)

  What Miss me is a pilot called "start fast Intel": as planned for other manufacturers (maybe integrated here) and a registry entry, which should be here: 64 bit OS - HKLM\Software\Wow6432Node\Intel\irstrt\Parameters, according to this forum (yes I know it's samsung): http://forum.notebookreview.com/samsung/660222-samsung-series-9-np900x3b-c-np900x4b-c-guide-intel-ra...

  So in the end I just want to know if everything works as it should, or if something is missing?

  PAT

  OK, it lacked a final piece:

  http://screencast.com/t/HQpu5a1Z9g

  This option must be set (and by default is not) and it works. wake up its hybrid sleep (i.e., controlled by quick ignition hibernating intel) takes about 10 seconds in which nothing happens (no progress bar like Hibernate Windows) which is a bit confusing, but at the end of the day, all is well and is certainly more rapid then wake of windows built in hibernation, even with an SSD. BTW, I have 16 GB of ram in the thinkpad edge, people having 8 or even 4 GB, it can be faster.

  Yep, the edge takes 16 GB, even though the specs say 8 is the limit

• YouTube videos are green for a few seconds when they start, quickly moving and switch between fullscreen and windowed mode

  suddenly, last night something happened with youtube. whenever I run a video on youtube its green for a few seconds, then it goes back to normal. its also green when I fast forward/jump and when I change between full screen and windowed. I linked to a screenshot of how it looks as if I googled this problem I find something else where people get a green screen but no picture at all and that it lasts the entire video.

  I tried updating the drivers for my graphics card. I tried to play on my nvidia card rather than use my intel graphics hd 4600 and still got the same result, but instead to get a green image, it was really dark almost black. I also tried to reinstall flash even downgrade to an earlier version, but nothing does. and the strange thing is that I only have this problem on youtube and only through firefox so I even tried reinstalling firefox, but that did not work either

  I found 2 things of this kind of help.
  the first solution is to disable hardware acceleration, but instead to get a green image for a few seconds, image frozen for the same period of time and then play and she is like when its Green, when I start it up, jump and change to full or windowed.

  the second solution I found in support for mozilla, to change the HTML5 player. But even if this player works great I really like it. for some reason any the break from the drive when I change between full screen and windowed mode and I don't like these pop-up windows get you that its now in full screen and I can press ESC to quit.

  These are just little things, but I would like to return the standard player.
  If anyone knows anything that could help me with this please let me know.

  This is the screenshot:
  http://i1285.Photobucket.com/albums/A584/JimZiii/1_zpsb3d41a08.PNG

  What a little wild speculation?

  YouTube uses a technology that has chopped videos in individual pieces, which is probably video serve more easily, but could create more opportunities for issues when moving in the video. There is an add-on called Center of YouTube that allows you to disable this technology and back to the days of one big file. Might be worth a try.

  • Preload YouTube videos while disabling playback Dash - Lifehacker
  • Center of YouTube - Add - ons for Firefox

• Windows XP Home cannot reconnect my player card after each session of re - start, quick to key in the username and password still.

  I recently installed a network storage drive to my network environments with desktop computer running windows 7, windows xp professional and windows xp home.

  Have this problems that even when the drive has been mapped with identification information entered and save selection 'auto re - connect on each session' in windows xp home. Computers running windows xp professional, and windows 7 allows me to create and record identification information that allows the reader to reconnect each time the system starts up, but not on xp family.

  Tried several methods of control over the update of the firmware, upgrade of service pack, part 3 card utilities and windows drive mapping manual, but it does not help.

  Hope someone could give advice what could be done to solve this problem because it seems very likely that it due to windows problems.

  Under user account, manage stored password options, I could create credentials in XP Pro, but not at home.

  Thanks for your reply.

  Correction of syntax: there is an oblique lack between "servername" and "share name".  The slash in front of 'USER' is also the polarity.  It should be rather than the oblique as in:

  NET use Z: \\servername\sharename / USER: username password

  -JW

• BlackBerry Smartphones does not start, quick flashing bright red Please HELP.

  Good then today I swapped from a 7130e to a 8330 (verizon)

  I managed to remove the old political security using Jl_Cmder (which worked fine) and I got rid of the firewall so issue.

  Phone was working fine until I tried to use the device switch Wizard, the operating system of lobbying to halfway through the process of upgrading the 8330 upgrade failed. I tried to upgrade to the latest release 8330AMEA_PBr4_1.5.0_rel101_PL3.2.0.51_A4.5.0.77.exe verizon.

  Now, my device appears to be watered.  It is the twice red light flash every 2 seconds.

  When I connect the device to my PC device manager sees the smartphone connect on the USB hub, but Device Manager never seem to find the device.

  I did a hard reset-no change.

  tried to reset the values by default using JL_cmder - no change, but got the following error.

  ---------------------------------------------------------

  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2007 Research In Motion Limited
  Connection to the device... debug: COM in the course error
  Open: (0 x 80040001)
  Error: could not open port

  Order is complete!

  To complete the factory reset, remove
  the battery to dream a computer Pocket wipe.

  If you have already saved your
  data, do it now or it will be deleted.

  Press a key to continue...

  ---------------------------------------------------------

  tried to do a JL_cmder wipe - no change.

  tried to connect with no battery and. -No change

  Tried to delete the blackberry smartphone in Device Manager. -No change

  My 3 other mature all connect correctly to the mobile and devices Erzberg and Office Manager.

  PS Yes I remembeed to remove the vender.xml file when you do most of this stuff.

  versions of the software

  Desktop Manager = 4.7.0.32

  Device Manager = 4.3.1.15

  OS before 4.2 issue I think

  Visit this link:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• How can I activate the quick start technology intel

  I have a new laptop of Dell Inspiron 7720. He started as if it was supposed to when I got it. But a month ago, it began to take a lot of time for W8 load. The dell logo screen lights up and just stay there for a long time. I can hear the laptop running, but it seems that it cannot find the operating system and load it. Sometimes, I have to press power off and on, several times, before loading the o/s. After it is loaded, there is an error message on the screen saying that I don't seem to have Intel Rapid Start with technology. I don't know what caused it become invalid, but I need to know what the activation process, so my laptop can start quickly, as it is supposed to. Help would be appreciated.

  Thank you

  I have a new laptop of Dell Inspiron 7720. He started as if it was supposed to when I got it. But a month ago, it began to take a lot of time for W8 load. The dell logo screen lights up and just stay there for a long time. I can hear the laptop running, but it seems that it cannot find the operating system and load it. Sometimes, I have to press power off and on, several times, before loading the o/s. After it is loaded, there is an error message on the screen saying that I don't seem to have Intel Rapid Start with technology. I don't know what caused it become invalid, but I need to know what the activation process, so my laptop can start quickly, as it is supposed to. Help would be appreciated.

  Thank you

  Hello

  You will need to check with Dell Support and ask questions about known issues with this component. They may be using a customized version of the Intel component.

  Cat: Dell Technical Support:
  http://www.Dell.com/support/incidents/us/en/19/chat/chattagentry?&c=us&s=DHS&CS=19&l=en

  Dell - Hardware Support:

  http://support.Dell.com/support/topics/global.aspx/support/hardware/hardware_portal

  Support forums - Dell Community:

  http://en.community.Dell.com/support-forums/default.aspx

  Intel also has a Guide to the user for this component.

  Use of Intel® Rapid Start technology guides:

  http://www.Intel.com/support/motherboards/desktop/sb/CS-033637.htm

  Concerning

• Quick start 2.0

  I've looked everywhere for Quick Start 2.0. The version on the conusmer site is NOT 2.0 is 1.18

  The links already posted in this forum by KalvinKlein do not work either.

  I reformatted my HARD drive and delete all partitions. Reinstalled Windows 7. After trying to install the so-called 2.0 from the lenovo site which is really 1.18 it says I have to repair the installation. No matter what I try always is the same.

  Called Lenovo support and they are the worst that I have ever spoken with.

  Hello and welcome,

  Uninstall and try to download this link...

  Start quick 2.0.10.11 for S10 - 3 S10 - 3T & tested thanks to all the courageous user with S10 S10-2... (S12 ION did not!)

• S10 on XP, quick start

  Cannot start quickly my s10.  And I can't get into the BIOS.  Press F2 does not work.

  I have installed latest version of BIOS and quick start but to no-avail.

  Any tips?

  Hello and welcome,

  for S10, the last BIOS 94 last Quickstart ...

  Press F2 start button pressed instant... on the second page of Config

  

  look like this...

  If you do not arrive within the BIOS... make the old... Disconnect battery & PSU press on start 30 seconds... Plug in PSU and beginning...

  Instant, press F2 for BIOS, insyde...

  cordially KalvinKlein

• Do you need 'DAQmx start task' vi read from a device NI DAQ (NI 9205)?

  I have a NI 9205, which I use to get a waveform data. To get started quickly, I used the wizard DAQ Vi. The code below (FIGURE 1) is the acquisition of data help VI looked like when I convert LabVIEW code and made some minor adjustments.

  When I looked online to see how to get hardware DAQ data, many sources use the task start DAQmx in figure 2.

  DAQmx start using VI makes another?  Materials using DAQ assist in loop gives you a lack of performance?    If so, figure a will have a lack of performance too as it is basically the DAQ help code?

  FIGURE 1

  Hello sticyfinger,

  Help for the Start Task function:

  "If you do not use this VI, a measurement task starts automatically when execution of the reading DAQmx VI. Automatic start of theDAQmx VI entry write determines if a build task starts automatically when the execution of the writing DAQmx VI.

  If you do not use the DAQmx start task VI and VI task DAQmx stop when you use DAQmx Read VI or VI to write DAQmx several times, as in a loop, the task starts and stops several times. Start and stop a task repeatedly reduce the performance of the application. »

  Hope that helps!

• Starting along with ssd 120 GB to the MacBook

  After you install the 120 GB SanDisk Extreme on my MacBook, it seems to take a while to find the HD. The screen is just blank whithout the Apple logo for quite a while. Once the Logo and the train to appear, it starts quickly.

  What is with that?

  Go to settings and choose the Sandisk as your boot drive and save and then restart and see if it is fixed.

• HP Pavilion dv6 - slow start compared to laptop older?

  Hello

  I recently bought a new Pavilion dv6 but noticed that there a start more slow times compared with my old Toshiba Portege R705-P35. I'm just curious as to why this is since the Portégé has much lower than my flag specs.

  Thank you

  TheLongBoarder

  Hi TheLongBoarder,

  The slow start could be caused by several different things. The first thing you want to do when diagnosed with a problem with a computer, is if it's a hardware problem or a software problem. In your case, I think it would be a hardware problem. You shouldn't have a problem with the memory or the speed of your hard drive. This model must be run at least 4 GB or 6 GB of RAM.

  It also depends what 'boot' you talk about.

  1. if it was the boot of when you press the power button to the Windows login screen (post), it could be a problem with the BIOS. May not have the most recent version, or the settings in the BIOS cannot be addressed to optimize speed and start Windows.

  If the version of the BIOS is the problem, you can find the latest version by going to the page drivers downloads HP, select the exact model of your laptop (i.e.. dv6-6c35dx) number, select your operating system and navigate to the section called "BIOS". Follow the instructions below to check if the currently installed version is newer or older version online.

  1. Click on Start and then run.

  2. In the text box on the run window, type regedit and click OK. This will open the registry editor program.

     Note: Do not make changes to any entry anywhere in the registry editor to avoid causing serious problems in the system. These steps only directly allow you to display a registry entry, is not to make changes.

  3. Find the HKEY_LOCAL_MACHINE under my computer folder and click the plus sign (+) after the folder name to expand the folder.

  4. In records resulting, find and click the plus sign (+) next to the hardware STORE to expand this folder.

  5. In records resulting, find and click on the (+) sign next to the DESCRIPTION to expand this folder.

  6. In records resulting, locate and click the folder System .

  7. In the results displayed in the right window, locate the entries SystemBiosVersion andSystemBiosDate .

  8. The data in the SystemBiosVersion field contains the version of the BIOS of your motherboard. This field can also contain additional information such as the manufacturer of the chipset and the manufacturer of the BIOS.

  9. The data in the field SystemBiosDate contains the date in the calendar associated with the current version of the BIOS of your motherboard. The date of the BIOS can be useful to determine the current version of the BIOS from the motherboard manufacturer's Web site if the version is not clear in the area of SystemBiosVersion .

  10. Close the registry editor without making any changes.

  The BIOS settings: If the problem is with the settings in the BIOS, there are a couple of tweeks that allow you to optimize speed. When you turn on the computer, the BIOS (Basic Input/Output System) works a lot of tests on devices and configure the devices connected to your computer. If some parameters are not configured correctly, the startup of your PC speed can be reduced. Enter the BIOS setup and look for commands or settings that may not be correct. To be sure, run a Google search to be sure. Make sure that your first boot device is set on your main hard drive. Make sure that the logo of the motherboard display is turned off. And make sure that the Quick start quick start feature is activated.

  2 if your talking about startup as the loading process connection Windows for a full load of Windows in the Windows desktop, you may have a problem with too many programs to load with windows. In this case, you can easily check and disable all programs unwanted on startup with Windows, which can cause speed problems. You can do this:

  1. click "Start" and type "msconfig" in the search bar and press "enter."

  2. This will open "System Configuration utility".

  3. on the right side of the window, navigate to the tab "start".

  4. you will see a list of all programs to load with Windows. Here, you can decide what you do or you want to load with Windows. Some programs are required to load with Windows so that Windows load and run properly, so careful who you disable. If you are not sure if it's necessary for Windows, you can do a quick search on google to be sure. Search for the song titled "startup item". Copy and paste in Google and type "is"EXAMPLE"necessary to start Windows? You will usually find your answer quickly enough.

  Slow start could be caused by a couple of other reasons as well.

  1.  fragmented - registry Windows registry is the most indispensable of the Windows operating system. When he begins to have problems with the registry, the speed and functionality of Windows becomes considerably slower. I doubt that this could be the problem with your computer. It is possible, but it is new and that if you have applied heavy use in a short period of time, it is not the likely culprit. If it, however, it's worth a check. You can find a good registry cleaner online and give him a check.

  2 of virus or Spyware infections- once the infections on the computer, they can cause immediate damage to Windows features. If you have been online a lot, even with an anti-virus program, you may have a virus any. You must run a full scan just to be sure. You can also download the free version of Malwarebytes and run as well. It works very well and is quite powerful.

  Hope that this helped you and you have this problem is resolved. If you have any other questions, do not hesitate to me message. In fact, I have a model dv6 that I may be able to help in any future issues, you may have.

  Later,.

  kabwebdev

• Windows 7 computer is slow to start

  After I put on computer, it begins to start - first logo dell from windows... so I have a black for about 15 seconds until the Welcome screen, which takes about 35 seconds - then a black for about 10 seconds screen and appears then the taskbar and the desktop starts slowly to fill.

  How can I troubleshhot these screens to return?

  A clean boot, try (as a test). Who starts quickly? (a time tested and studied, don't forget to reset - step 3)

  It might be that the OS just needs a little maintenance, so try a Disk Cleanup, disk error checking, disk defragmentation run a check of the sfc/scannow . They can help, depending on what is actually causing the problem.

  Run a check of malware (just in case!). Download, install, update (by right clicking on its icon and 'run as administrator' then go to the update tab) and run a complete scan with free Malwarebytes.

• Some features in the Control Panel does not start

  Original title: some feauters on Control Panel do not open

  my computer laptop OS is windows 8

  When I open my control panel functions are not open

  options, troubleshooting, customization of power

  Pleas give me a few tips, how can I do to fix

  Hello Kiran,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that some features don't not throw in Control Panel. I'll be happy to help you with your query. However, let me ask you a few questions to better understand the issue and assist you accordingly.

  1. What happens when you try to start the service, as said above?
  2. You receive an error message? If Yes, what is the exact and complete error message?
  3. You did any hardware/software specific change in the computer before the show?
  4. You use any third-party antivirus installed on your computer program?

  The issue may have been caused due to conflicts between third-party software. Try these steps and see if they help.

  Step 1: Start in safe mode

  With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC. In previous versions of Windows, you might get to the screen by pressing F8 before Windows starts. Windows 8 PCs starts quickly, so there is no enough time to press F8.

  See the article: Start settings for Windows (including safe mode)

  Step 2: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  N OTE: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the steps above and check that if these functions of launch and let us know the result so that the answers to the questions, we will be happy to help you further.

  Thank you.

• macOS Sierra download stops with the error to 2.15 GB every time

  I'm currently under OS X El Capitan 10.11.6 and I try to download and install macOS Sierra.  I tried several times and whenever the download stops at 2.15 GB with the message macOS that Sierra could not download use the purchases page to try again.  When I go to the shopping page I see a category for other purchases that lists the Sierra macOS.  However, the button has the text in red next to it indicating that an error has occurred and the button has no text.  By clicking the button does nothing.  I restart and remove partial downloading of applications to try again.  See screenshot below.

  

  I have enough free space on my hard drive.

  

  Here are the details of the machine.

  

  I tried using wired and wireless network card and get the same result be it.  This could be the cause of this problem?

  Same thing happens for me only that I had as much as 4.22 GB.  I've been downloading since yesterday night, market.  It started quickly with about 30-40 minutes for the download, then it begins to rise.  He stood as far as 17 to 18 hours.  Now it gives me this error failed.  It seems to be widespread, however.

• Why Firefox 27.0.1 is so slow when I use the NVidia drivers?

  Windows 8.1 using 64-bit and the last drivers Nvidia (NVIDIA Quadro FX 380). Firefox, it takes about 6 seconds to start. When I remove the nvidia drivers, Firefox starts quickly again.

  You have enabled drivers NVIDIA and acceleration hardware tour?

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL